Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Paired article numbers | FTR5980 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
Important compatibility info
| Length | 132 mm |
| Width | 67 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
Important compatibility info
| Seal Diameter | 59.5 mm |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Additional Information 2 | with groove |
| Length | 96 mm |
| Thread Size | M16X1.5 |
Important compatibility info
| Length 1 | 1485 mm |
| Length 2 | 1485 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Centre |
Important compatibility info
| Mounting Type | Bolted |
| Number of Rivet Holes | 3 |
| Thread Measurement 1 | M14x1.5 |
| Bore Diameter 1 | 17.5 mm |
| Bore Diameter 2 | 20 mm |
| Function | Ball Joint |
| Version | Fitting Kit |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Inner diameter 1 | 38 mm |
| Inner diameter 2 | 38 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Colour | Black |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Additional Information | with banjo fitting |
| Thread Size | M10x1 |
| Length | 535 mm |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Thread Size | M10x1 |
| Length | 535 mm |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Front Axle Right |
| Thread Type | with internal thread |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Bore Diameter 1 | 14.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
| Function | Ball Joint |
| Thread Measurement 1 | M14x1.2 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 2 | 18 mm |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 84 mm |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 25 mm |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
| Function | Bellow Kit, steering |
| Material | Thermoplast |
| Length | 208 mm |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 47 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 160 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 160 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Axle Joint Length | 202 mm |
| Thread Measurement 2 | M16X1.5 |
| Length | 202 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 110 mm |
| Material | Steel |
| Thread Measurement 2 | M12x1.25 |
| Paired article numbers | FDL7699 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Type | Brake Hose |
| Length | 504 mm |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Length | 502 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Impeller Diameter | 57 mm |
| Water Pump Pulley Diameter | 60 mm |
| Number of Teeth | 24 |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Length 2 | 286 mm |
| Function | Brake Hose |
| Length 1 | 304 mm |
| Additional Information | with banjo fitting |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Left |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Length 2 | 286 mm |
| Function | Brake Hose |
| Length 1 | 304 mm |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with banjo fitting |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















