Important compatibility info
| Inner diameter | 19.05 mm |
| Function | Slave Cylinder, clutch |
| Material | Aluminium |
| Type | Slave Cylinder, clutch |
Important compatibility info
| Function | Air Filter |
| Width | 162 mm |
| Height | 43 mm |
| Length | 304 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Additional Information 2 | with clamps |
| Function | Bellow Kit, steering |
| Material | Thermoplast |
| Type | Bellow Kit, steering |
| Length | 196 mm |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 53 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Length | 463 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Centre, Rear |
| Thread Type | with internal thread |
Important compatibility info
| Thread Size | M10x1 |
| Length 2 | 286 mm |
| Function | Brake Hose |
| Length 1 | 304 mm |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Thread Type | with internal thread |
Important compatibility info
| Additional Information | with banjo fitting |
| Placement on Vehicle | Rear Axle Right |
| Length 2 | 287 mm |
| Function | Brake Hose |
| Length 1 | 305 mm |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Thread Size | M10x1 |
| Thread Type | with internal thread |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with left-hand thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
Important compatibility info
| Function | Tie Rod End |
| Thread Measurement 2 | M14x1.5 |
| Thread Measurement 1 | M16x1.5 |
| Type | Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 440 mm |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | with acoustic wear warning |
| Number of Clips | 4 |
| Brake System | Lucas - Girling |
| Thickness/Strength 1 | 16.4 mm |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 47.2 mm |
| Width 1 | 87.1 mm |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Opening Temperature | 89 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Plastic |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Replaces | BBT121 |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Length | 100 mm |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 24 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Tie Rod End |
| Thread Measurement 2 | M20X1.5 |
| Thread Measurement 1 | M28X1.5 RHT |
| Length | 115 mm |
| Type | Tie Rod End |
| Cone Size | 26 mm |
| Thread Type | with right-hand thread |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Measurement 2 | M20X1.5 |
| Thread Measurement 1 | M16X1.5 |
| Length | 230 mm |
| Function | Inner Tie Rod |
| Axle Joint Length | 230 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Length | 447 mm |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Function | Brake Hose |
| Additional Information 2 | without banjo bolt |
| Additional Information | with banjo fitting |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Length | 470 mm |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left |
| Type | Brake Hose |
Important compatibility info
| Number of mounting bores | 3 |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M14x2 |
| Bore Diameter 1 | 17.4 mm |
| Function | Ball Joint |
| Bore Diameter 2 | 20 mm |
| Type | Ball Joint |
| Mounting Type | Bolted |
| Steering arm type | for control arm |
Important compatibility info
| Length | 143 mm |
| Thread Size | M22X1.5 |
| Additional Information 2 | with groove |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| External Teeth, Wheel Side | 25 |
| Technical Information Number | Middle groove |
| Seal Diameter | 53.3 mm |
| Internal Teeth, wheel side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 390 mm |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Thread Measurement 1 | M10x1 |
| Thread Type | with internal thread |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Function | Inner Tie Rod |
| Thread Measurement 2 | M18x1.5 |
| Thread Measurement 1 | M16x1.5 |
| Length | 262.5 mm |
| Axle Joint Length | 263 mm |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 80 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7165 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 80 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7164 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5565 |
| Inner diameter | 10 mm |
| Height | 66 mm |
| Additional Information 2 | without bearing |
| Function | Suspension Strut Support Mount |
| Distance of fastening bolts | 135 mm |
Important compatibility info
| Replaces | BWK1040 |
| Inner diameter 1 | 40 mm |
| Outer diameter 1 | 74 mm |
| Only in connection with | BHN208, FHN208 |
| Width 1 | 40 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 441 mm |
| Function | Brake Hose |
| Additional Information | with banjo fitting |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Additional Information 2 | with banjo bolt |
| Thread Size | M10x1 |
| Thread Measurement 1 | M10x1 |
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 140 mm |
| Rod/Strut | Suspension Rod |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Width 1 | 37 mm |
| Outer diameter 1 | 74 mm |
| Inner diameter 1 | 38.1 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Inner diameter 2 | 54 mm |
| Colour | Black |
| Placement on Vehicle | Rear, Upper, Right |
| Function | Charge Air Hose |
| Inner diameter 1 | 54 mm |
| Material | PE (Polyethylene) |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Brake System | Ate - Teves |
| Thickness/Strength 1 | 17.5 mm |
| Number of Springs | 2 |
| Function | Brake Pad Set, disc brake |
| Number of pads | 4 |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Homologated |
| Height 1 | 52.2 mm |
| Width 1 | 156.7 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Length | 100 mm |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 21 mm |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
Important compatibility info
| Quantity | 1 |
| Wiper blade type | Bracket wiper blade with spoiler |
| Length | 700 mm |
| Function | Wiper Blade |
| Type | Wiper Blade |
| Number of adapters | 2 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing Kit |
| Width 1 | 37 mm |
| Outer diameter 1 | 74 mm |
| Inner diameter 1 | 36 mm |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Type | Brake Pad Set, disc brake |
| Height 1 | 41 mm |
| Width 1 | 99.8 mm |
| Number of wear indicators | 2 Per Axle |
| Thickness/Strength 1 | 15.3 mm |
| Number of pads | 4 |
| Function | Brake Pad Set, disc brake |
| Brake System | Akebono |
| Wear Warning Contact | incl. wear warning contact |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 48 mm |
| Material | Thermoplast |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Length | 200 mm |
| Additional Information 2 | with clamps |
Important compatibility info
| Inner diameter 2 | 47 mm |
| Inner diameter 1 | 47 mm |
| Colour | Black |
| Material | PE (Polyethylene) |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Type | Brake Hose |
| Additional Information 2 | with banjo bolt |
| Mounting Bolt Thread Size | M10x1.5 |
| Function | Brake Hose |
| Length | 440 mm |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Size | M10x1 |
| Additional Information | with banjo fitting |
Important compatibility info
| Function | Brake Hose |
| Length | 302 mm |
| Additional Information | with banjo fitting |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Type | with internal thread |
Important compatibility info
| Length | 222 mm |
| Inner diameter 2 | 55 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Material | Rubber |
Important compatibility info
| Inner diameter | 22.4 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Length | 52 mm |
| Type | Mounting, control/trailing arm |
| Material | Aluminium |
| Paired article numbers | FSK7478 |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 87 mm |
| Length | 123 mm |
| Material | Thermoplast |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Replaces | BCB6004 |
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Inner diameter | 14 mm |
| Width | 92 mm |
| Height | 41 mm |
| Placement on Vehicle | Lower, Upper, Rear |
Important compatibility info
| Thread Type | with internal thread |
| Length | 430 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | prepared for wear warning indicator |
| Height 1 | 46.7 mm |
| Height 2 | 48 mm |
| Width 1 | 123.2 mm |
| Number of Clips | 2 |
| Number of pads | 4 |
| Brake System | Ate - Teves |
| Thickness/Strength 1 | 15.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Length 2 | 1105 mm |
| Type | Cable Pull, parking brake |
| Length 1 | 1450 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Function | Cable Pull, parking brake |
Important compatibility info
| Length 1 | 2730 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with internal thread, with external thread |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Function | Brake Hose |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Homologated |
| Height 1 | 46.6 mm |
| Height 2 | 40.1 mm |
| Width 1 | 117 mm |
| Width 2 | 93.6 mm |
| Thickness/Strength 1 | 15.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 149 mm |
| Material | Steel |
| Thread Measurement 2 | M10x1.25 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | excl. wear warning contact |
| Thickness/Strength 1 | 15 mm |
| Function | Brake Pad Set, disc brake |
| Brake System | Sumitomo |
| Type | Brake Pad Set, disc brake |
| Height 1 | 52.7 mm |
| Width 1 | 127.8 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6388 |
| Placement on Vehicle | Rear Axle Left |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































