Important compatibility info
Material | Plastic |
Function | Bushing, axle cross member |
Type | Bushing, axle cross member |
Placement on Vehicle | Rear Axle, Left, Right |
Important compatibility info
Placement on Vehicle | Rear Axle, Left, Right, Upper |
Function | Fastening Bolt, control arm |
Type | Fastening Bolt, control arm |
Important compatibility info
Length 1 | 1285 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Colour | Black |
Material | NBR (nitrile butadiene rubber) |
Outer diameter 2 | 59 mm |
Outer diameter 1 | 75 mm |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1005S)
Important compatibility info
Additional Information 2 | with clamps |
Inner diameter 2 | 100 mm |
Inner diameter 1 | 31 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Length | 100 mm |
Important compatibility info
Function | Brake Hose |
Length | 502 mm |
Type | Brake Hose |
Additional Information | with banjo fitting |
Placement on Vehicle | Rear Axle Left |
Thread Type | with internal thread |
Important compatibility info
Colour | Black |
Inner diameter 2 | 48 mm |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 48 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Function | Brake Hose |
Length | 523 mm |
Type | Brake Hose |
Thread Size | M10x1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with internal thread, with external thread |
Important compatibility info
Number of wear indicators | 2 Per Axle |
Width 1 | 99.8 mm |
Height 1 | 41 mm |
Wear Warning Contact | incl. wear warning contact |
Brake System | Akebono |
Thickness/Strength 1 | 15.5 mm |
Placement on Vehicle | Rear Axle |
Function | Brake Pad Set, disc brake |
Number of pads | 4 |
Type | Brake Pad Set, disc brake |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 112 mm |
Inner diameter 2 | 80 mm |
Inner diameter 1 | 32 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
Length | 130 mm |
Height | 103 mm |
Width | 49 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Length 2 | 1076 mm |
Length 1 | 2004 mm |
Important compatibility info
Version | Fitting Kit |
Thread Measurement 2 | M30x1.5 |
Thread Measurement 1 | M16x1.5 |
Bore Diameter 1 | 16 mm |
Function | Ball Joint |
Mounting Type | Pressed |
Type | Ball Joint |
Steering arm type | for control arm |
Bore Diameter 2 | 19.6 mm |
Important compatibility info
Length 1 | 1666 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Length 1 | 2004 mm |
Length 2 | 1076 mm |
Important compatibility info
Function | Joint Kit, drive shaft |
External Teeth, Wheel Side | 22 |
Technical Information Number | Middle groove |
Type | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Seal Diameter | 47 mm |
Internal Teeth, wheel side | 20 |
Length | 130 mm |
Thread Size | M22X1.5 |
Important compatibility info
Length 2 | 263 mm |
Function | Brake Hose |
Length 1 | 325 mm |
Placement on Vehicle | Front Axle Left |
Type | Brake Hose |
Thread Type | with internal thread |
Additional Information | with banjo fitting |
Important compatibility info
Height | 40 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Inner diameter | 10 mm |
Width | 53 mm |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Type | Brake Hose |
Length | 727 mm |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Thread Size | M10X1.25 |
Length | 70 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023