Locks

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID70 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID70 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID70 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID62 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID70 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID62 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID65 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is only suitable for lost key programming due to the 33 logic.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: EEPROM
• Reference: ID70 (33)
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is only suitable for spare key programming due to the B3 logic.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID70 (B3)
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is suitable for lost key programming due to the 53 logic.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: EEPROM
• Reference: ID70 (53)
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• Sometimes will operate other features such as the headlights.
• Blade: HU83
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Headlights)
• Transponder: None

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Blade: VA2
• This item is non-returnable once cut
• Key blades are the metal part of the key that is cut specifically to each car.
• Battery: None
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• This product is suitable for remotes that have a separate battery and circuit board

• Sometimes will operate other features such as the headlights.
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Key cases are most often used to repair damaged keys by swapping the PCB board from an existing remote.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• Profile: NSN14/NSN19

• Sometimes will operate other features such as the headlights.
• Blade: HU83
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• This blade is designed for Volkswagen Touareg slot-in-dash and keyless remotes such as our AUTRK0132 or AUTRK0176.