Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Distance of fastening bolts | 119 mm |
| Inner diameter | 12 mm |
| Additional Information 2 | without bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5385 |
Important compatibility info
| Height | 9 mm |
| Outer diameter | 55 mm |
| Inner diameter | 26 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Inner diameter 2 | 31 mm |
| Colour | Black |
| Inner diameter 1 | 31 mm |
| Material | PE (Polyethylene) |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Inner diameter 2 | 51 mm |
| Function | Charge Air Hose |
| Port / Connector type | OE HORSE SHOE CLIP |
| Type | Charge Air Hose |
| Colour | Black |
| Inner diameter 1 | 51 mm |
| Material | AEM (Ethylene Acrylate Rubber) |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 122 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 122 mm |
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Function | Wheel Bearing Kit |
| Width 1 | 39 mm |
| Outer diameter 1 | 80 mm |
| Inner diameter 1 | 42 mm |
| Additional Information 2 | with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Bearing Code | Gen 1 |
Important compatibility info
| Inner diameter 1 | 40 mm |
| Outer diameter 1 | 72 mm |
| Only in connection with | BHN213, FHN213 |
| Width 1 | 37 mm |
| Tightening Torque | 265 Nm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 45 mm |
| Outer diameter 1 | 83 mm |
| Width 1 | 44 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Bearing Code | Gen 1 |
Important compatibility info
| Diameter | 20.6 mm |
| Function | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Brake Cylinder |
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 892 mm |
| Length 2 | 1262 mm |
| Type | Cable Pull, manual transmission |
| Number of Gears | for forwards gear |
Important compatibility info
| Distance of fastening bolts | 104 mm |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without bearing |
| Type | Suspension Strut Support Mount |
| Height | 54 mm |
| Inner diameter | 12 mm |
| Paired article numbers | FSM5517 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Paired article numbers | FSM5532 |
| Distance of fastening bolts | 115 mm |
| Function | Suspension Strut Support Mount |
| Inner diameter | 11 mm |
| Height | 61 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Paired article numbers | FCA7747 |
| Material | Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Upper |
Important compatibility info
| Length | 280 mm |
| Thread Size | M12x1.75 |
| Thread Measurement 2 | M12x1.75 |
| Paired article numbers | FDL7620 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Length | 317 mm |
| Thread Size | M12x1.5 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Measurement 2 | M12x1.5 |
| Material | Metal, Plastic |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7820 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8144)
Important compatibility info
| Version | With fittings(ex.KP) |
| Paired article numbers | FCA7951 |
| Diameter | 18 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
| Length | 80 mm |
| Paired article numbers | FSK8175 |
| Bearing/Mounting Type | Hydro Mount |
| Diameter | 74 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle, Left, Right, Lower, Rear |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 985 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 28 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1002 mm |
| External Teeth, Wheel Side | 28 |
| Internal Teeth, wheel side | 36 |
| External Teeth, Diff.Side | 37 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
| Type | Tie Rod End |
| Function | Tie Rod End |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 339 mm |
| Thread Measurement 1 | M14X1.5 |
| Thread Measurement 2 | M16X1.5 |
| Axle Joint Thread Type | with external thread |
| Type | Inner Tie Rod |
| Axle Joint Length | 339 mm |
| Function | Inner Tie Rod |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 19 mm |
Important compatibility info
| Diameter | 25.4 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left |
Important compatibility info
| Diameter | 19 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Central Slave Cylinder, clutch |
| Base body material | Plastic |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
| Opening Temperature | 92 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Aluminium |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7266 |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 113 mm |
| Inner diameter 2 | 77 mm |
| Inner diameter 1 | 31 mm |
| Material | Thermoplast |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Type | Bellow Kit, drive shaft |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Inner diameter 2 | 68 mm |
| Inner diameter 1 | 20 mm |
| Length | 98 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
| Thread Size | M12X1.25 |
| Length | 97 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Length | 200 mm |
| Height | 100 mm |
| Thickness | 45 mm |
| Inner diameter | 25 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
Important compatibility info
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 163 mm |
| Inner diameter 2 | 51 mm |
| Inner diameter 1 | 10 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Material | Rubber |
Important compatibility info
| Inner diameter 2 | 59 mm |
| Inner diameter 1 | 15 mm |
| Material | Thermoplast |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Length | 210 mm |
Important compatibility info
| Function | Bump Stop, steering knuckle |
| Type | Bump Stop, steering knuckle |
| Placement on Vehicle | Rear Axle, Left, Right |
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle, Left, Right |
Important compatibility info
| Inner diameter 2 | 51 mm |
| Colour | Black |
| Inner diameter 1 | 51 mm |
| Material | Silicone |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 257 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 257 mm |
| Axle Joint Thread Type | with external thread |
| Type | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Material | Plastic |
| for OE number | 068121133AB |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Material | Plastic |
| for OE number | 044 121 145 K |
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Bearing Code | Gen 0 |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Type | Wheel Bearing Kit |
Important compatibility info
| Inner diameter 1 | 55 mm |
| Outer diameter 1 | 90 mm |
| Width 1 | 60 mm |
| Tightening Torque | 420 Nm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
| Bearing Code | Gen 1 |
Important compatibility info
| Inner diameter | 12 mm |
| Length | 132 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Placement on Vehicle | both sides |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 2 | 853 mm |
| Length 1 | 1224 mm |
| Type | Cable Pull, manual transmission |
| Number of Gears | for forwards gear |
Important compatibility info
| Function | Tie Rod End |
| Thread Measurement 2 | M16x1.5 |
| Thread Measurement 1 | M12x1.75 |
| Length | 134 mm |
| Type | Tie Rod End |
| Paired article numbers | FTR6094 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Inner diameter 1 | 56 mm |
| Length | 208 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 19 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Material | Rubber |
Important compatibility info
| Voltage | 12 V |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Brake Cylinder |
| Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Important compatibility info
| Height | 51 mm |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with bearing |
| Paired article numbers | FSM5591 |
| Function | Suspension Strut Support Mount |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5590)
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5210)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































