Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Inner diameter 1 | 48 mm |
| Colour | Black |
| Inner diameter 2 | 48 mm |
| Replaces | BTH1409 |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Inner diameter 2 | 44 mm |
| Inner diameter 1 | 44 mm |
| Colour | Black |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR4948 |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Thread Measurement 2 | M14X1.5 |
| Length | 240 mm |
| Thread Measurement 1 | M18X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 240 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 226 mm |
| Thread Measurement 1 | M20X1.5 |
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left |
| Axle Joint Length | 226 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Type | Inner Tie Rod |
| Paired article numbers | FTR5556 |
Important compatibility info
| Thread Measurement 2 | M16X1.5 |
| Length | 350 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 350 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5839 |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Thread Measurement 1 | M14X1.5 |
| Length | 402 mm |
| Function | Inner Tie Rod |
| Axle Joint Length | 402 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Bearing Code | Gen 0 |
| Inner diameter 1 | 30 mm |
| Outer diameter 1 | 67 mm |
| Width 1 | 25 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Bearing Code | Gen 0 |
| Inner diameter 1 | 35 mm |
| Inner diameter 2 | 22 mm |
| Outer diameter 1 | 59 mm |
| Width 1 | 17 mm |
| Outer diameter 2 | 51 mm |
| Width 2 | 15 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Bearing Code | Gen 1 |
| Inner diameter 1 | 48 mm |
| Outer diameter 1 | 84 mm |
| Width 1 | 48 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Replaces | BWP2091 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Impeller Diameter | 66 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Number of Ribs | 6 |
| Water Pump Type | for v-ribbed belt use |
| Water Pump Pulley Diameter | 98 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7569 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Function | Bellow Kit, steering |
| Inner diameter 2 | 47 mm |
| Inner diameter 1 | 15 mm |
| Material | Thermoplast |
| Length | 180 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
Important compatibility info
| Inner diameter | 26 mm |
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
Important compatibility info
| Function | Brake Hose |
| Length 2 | 300 mm |
| Length 1 | 340 mm |
| Type | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with banjo fitting |
| Additional Information 2 | with banjo bolt |
| Thread Size | M10x1 |
| Mounting Bolt Thread Size | M10x1 |
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Important compatibility info
| Inner diameter | 12 mm |
| Outer diameter | 14 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Length | 101 mm |
| Placement on Vehicle | Rear |
Important compatibility info
| Function | Oil sump |
| Material | Plastic |
| Type | Oil sump |
| Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M12x1.25 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper |
Important compatibility info
| Number of Holes | 6 |
| Rotor Style | Solid |
| Height | 71 mm |
| Outer diameter | 298 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Centering Diameter | 85 mm |
| Quantity | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Material | Aluminium |
| Length | 336 mm |
| Thread Size | M10x1.5 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length 1 | 1520 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length 2 | 1380 mm |
Important compatibility info
| Material | Plastic |
| Pressure | 1.4 bar |
| Pressure to | 20 psi |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7833 |
| Length | 239 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Important compatibility info
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Length | 294 mm |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Lower Right |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Type | Wiper Motor |
| Voltage | 12 V |
| Additional Information | with rod assembly |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7963 |
| Length | 330 mm |
| Diameter | 18 mm |
| Material | Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5731)
Important compatibility info
| Number of Teeth | 23 |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Placement on Vehicle | Rear Axle, Left, outer |
| Length 2 | 485 mm |
| Thread Type | with external thread |
| Length | 170 mm |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Function | Brake Hose |
| Length 1 | 390 mm |
Important compatibility info
| Diameter | 14 mm |
| Length | 355 mm |
| Placement on Vehicle | Rear Axle Left, Upper |
| Steering arm type | Control Arm |
| Paired article numbers | FCA7981 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 31 |
| Length | 752 mm |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Diff.Side | 41 |
| Type | Drive Shaft |
| Replaces | BDS1314 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1186)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7945 |
| Diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5786)
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7944 |
| Steering arm type | Control Arm |
| Diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5786)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 47 mm |
| Outer diameter | 292 mm |
| Brake Disc Thickness | 16 mm |
| Number of Holes | 5 |
| Minimum thickness | 14 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 2 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 98 mm |
| Thread Size | M12X1.5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 230 mm |
| Thread Size | M14x1.5 |
| Thread Measurement 1 | M14x1.5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
Important compatibility info
| Length | 222 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Thread Type | with internal thread |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Thread Size | M10x1 |
| Additional Information 2 | without banjo bolt |
| Type | Brake Hose |
| Length | 714 mm |
| Function | Brake Hose |
| Additional Information | with banjo fitting |
| Thread Type | with internal thread |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | excl. wear warning contact |
| Brake System | Ate - Teves |
| Thickness/Strength 1 | 16.8 mm |
| Number of Springs | 2 |
| Function | Brake Pad Set, disc brake |
| Number of pads | 4 |
| Type | Brake Pad Set, disc brake |
| Height 1 | 63.7 mm |
| Width 1 | 156.3 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Hub Profile | 20.5 x 18.2 |
| Outer diameter | 215 mm |
| Type | Clutch Kit |
| Number of Teeth | 24 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 20.4 x 18.2 |
| Number of Teeth | 24 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 20 |
| Number of Parts | 3 -part |
| Hub Profile | 23 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 20 |
| Number of Parts | 3 -part |
| Hub Profile | 23 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Hub Profile | 20.8 x 18.3 |
| Number of Parts | 3 -part |
| Outer diameter | 190 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 18 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































