Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 378 mm |
| Thread Size | M14x1.5 |
| Thread Measurement 2 | M14x1.5 |
| Rod/Strut | Suspension Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7542 |
Important compatibility info
| Length | 123 mm |
| Height | 66 mm |
| Inner diameter | 12 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Upper, Front, transmission sided |
Important compatibility info
| Function | Cap, coolant tank |
| Type | Cap, coolant tank |
Important compatibility info
| Water Pump Pulley Diameter | 130 mm |
| Function | Water Pump, engine cooling |
| Impeller Diameter | 76 mm |
| Number of Ribs | 5 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Bushing, axle cross member |
| Type | Bushing, axle cross member |
| Placement on Vehicle | Rear Axle, Left, Right |
Important compatibility info
| Mounting Type | Bolted |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Additional Information 2 | without bolts/screws |
| Number of mounting bores | 3 |
| Bore Diameter 1 | 21.9 mm |
| Steering arm type | for control arm |
| Thread Measurement 1 | M18X1.5 |
| Function | Ball Joint |
| Type | Ball Joint |
Important compatibility info
| Length | 126 mm |
| Thread Size | M12x1.75 |
| Thread Measurement 2 | M12x1.75 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Axle Joint Length | 370 mm |
| Length | 370 mm |
| Thread Measurement 1 | M16x1.5 |
| Thread Measurement 2 | M16x1.5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Metal, Plastic |
| Length | 276 mm |
| Thread Size | M10x1.5 |
| Thread Measurement 2 | M10x1.5 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 192 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 53 mm |
| Additional Information 2 | with clamps |
| Material | Rubber |
Important compatibility info
| Length | 324 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Size | M10x1.5 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
Important compatibility info
| Dust protection diameter 1 | 57 mm |
| Diameter 1 bump stop | 21.5 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Height of bump stop | 75 mm |
| Dust protection height | 227 mm |
| Diameter 2 bump stop | 55 mm |
| Placement on Vehicle | Front Axle |
| Dust protection diameter 2 | 79 mm |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Outer diameter | 58 mm |
| Length | 75 mm |
| Inner diameter | 18 mm |
| Paired article numbers | FSK8156 |
| Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
| Length | 93 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | FCA7884 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Material | Aluminium |
| Diameter | 22.2 mm |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Length | 151 mm |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 32 |
| Thread Size | M22X1.5 |
| Additional Information 2 | with groove |
| Seal Diameter | 61.2 mm |
| External Teeth, Wheel Side | 26 |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Thread Size | M16X1.5 |
| Length | 112 mm |
| Additional Information 2 | with groove |
| Internal Teeth, wheel side | 24 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 71 mm |
Important compatibility info
| Length | 150 mm |
| External Teeth, Wheel Side | 28 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 56 mm |
| Additional Information 2 | with groove |
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 46 |
| Technical Information Number | Middle groove |
| Thread Size | M22X1,5 |
Important compatibility info
| Length | 97.5 mm |
| Diameter | 70.1 mm |
| Paired article numbers | FSK8190 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Important compatibility info
| Inner diameter | 15.87 mm |
| Material | Aluminium |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Important compatibility info
| Height | 35 mm |
| Width | 205 mm |
| Filter type | Particulate Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 300 mm |
Important compatibility info
| Placement on Vehicle | inner |
| Additional Information | with gaskets/seals |
| Opening Temperature | 97 °C |
| Housing Type | without housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 719 mm |
| Internal Teeth, wheel side | 28 |
| External Teeth, Diff.Side | 37 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Inner Tie Rod |
| Thread Size | M16x1.5 |
| Type | Inner Tie Rod |
| Length | 289 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Opening Temperature | 98 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 658 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 140 mm |
| Thread Size | M20X1,5 |
| External Teeth, Wheel Side | 23 |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 108 mm |
| Diameter | 10 mm |
| Material | Metal |
| Thread Size | M12x1.5 |
| Paired article numbers | FDL7716 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























