Important compatibility info
| Function | Oil Filter |
| Outer diameter | 107 mm |
| Internal Thread Size | 3/4" - 16 UNF |
| Type | Oil Filter |
| Filter type | Spin-on Filter |
| Height | 176 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gasket, cylinder head cover |
| for OE number | 470 016 03 21 |
| Material | AEM (Ethylene Acrylate Rubber) |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium |
| Type | Fuel filter |
| Pipe Diameter | 10 mm. 8 mm |
| Height | 257 mm |
| Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
| Additional Information 2 | with seal ring |
| Function | Fuel filter |
| Internal Thread Size | M20 x 1,5 |
| Outer diameter | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with nut |
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Length | 800 mm |
| Number of Ribs | 6 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 25.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38250)
- 1x Febi Belt Tensioner, v-ribbed belt (22369)
Important compatibility info
| Additional Information 2 | with tensioner element |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1070 mm |
| Number of Ribs | 6 |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (37533)
- 1x Febi Belt Tensioner, v-ribbed belt (178939)
Important compatibility info
| Function | V-Ribbed Belt Set |
| Length | 963 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Width of castor bearing surface | 25 mm |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (176704)
- 1x Febi Belt Tensioner, v-ribbed belt (181682)
Important compatibility info
| Length | 101 mm |
| Notches / Holes Number | 3 |
| Type | Intake Valve |
| Function | Intake Valve |
| Valve stem diameter | 5.98 mm |
| Valve head diameter | 33.45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 134 |
| for OE number | 1 717 599 S2 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182108)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (179385)
- 1x Febi Guide, timing chain (179396)
- 1x Febi Guide, timing chain (179382)
- 1x Febi Guide, timing chain (46773)
- 2x Febi Gear/Sprocket, camshaft (181607)
- 1x Febi Gear, injection pump (181629)
- 1x Febi Sprocket, crankshaft (183177)
- 1x Febi Gasket, timing case cover (109620)
- 1x Febi Shaft Seal, crankshaft (103216)
Important compatibility info
| Width | 20 mm |
| Number of Teeth | 131 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. deflection pulley, incl. tensioner pulley |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (181594)
- 1x Febi Tensioner Pulley, timing belt (178018)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (180137)
- 1x Febi Pulley Bolt (33781)
- 1x Febi Nut (180733)
- 1x Febi Stud (181107)
Important compatibility info
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Length | 1050 mm |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28916)
- 1x Febi Belt Tensioner, v-ribbed belt (31076)
Important compatibility info
| Length | 1245 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (40323)
- 1x Febi Belt Tensioner, v-ribbed belt (39390)
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 400 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 198 mm |
| Outer diameter | 70 mm |
| Inner diameter | 25 mm |
| Filter type | Filter Insert |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, oil temperature |
| Function | Sensor, oil temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Cable Length | 300 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Type | Tie Rod End |
| Spanner Size | 24 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Paired article numbers | 183508 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Paired article numbers | 183616 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear, Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 183615 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear, Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Cone Size | 20 mm |
| Additional Information | with rubber-metal mounts |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Steering arm type | for control arm |
| Additional Information 2 | with washers, with bolts/screws |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Paired article numbers | 183625 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | for control arm |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Cone Size | 20 mm |
| Type | Ball Joint |
| Additional Information | with nuts |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 183719 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Placement on Vehicle | Rear, Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Type | Ball Joint |
| Function | Ball Joint |
| External Thread Size | M12 x 1,5, M10 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Paired article numbers | 183622 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Spanner Size | 18 |
| Diameter | 1 mm |
| Length | 298 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 11 mm |
| Number of mounting bores | 2 |
| Operating Mode | Hydraulic |
| Rotation Direction | Anticlockwise rotation |
| for OE number | 003 460 54 80 |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.9 mm. 16.5 mm |
| Additional Information | with retaining spring holder |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | with acoustic wear warning |
| Length | 113.4 mm |
| Width | 47.6 mm |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 155.1 mm. 156.4 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with piston clip |
| Placement on Vehicle | Front Axle |
| Width | 56.1 mm. 62.4 mm |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Length | 122.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with staples |
| Width | 57.7 mm. 55.7 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























