Important compatibility info
| Inner diameter 1 | 38 mm |
| Inner diameter 2 | 81 mm |
| Length | 126 mm |
| Paired article numbers | 185285 |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Placement on Vehicle | Wheel Side, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (185301)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 685 mm |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 241 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
| Housing length | 365 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Eject Force | 375 N |
| Placement on Vehicle | both sides |
| Length | 590 mm |
| Housing Diameter | 18 mm |
| Stroke | 228 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 323 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 145 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Diameter | 18 mm |
| Housing length | 205 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 6 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 345 mm |
| Eject Force | 270 N |
| Stroke | 106 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Exhaust Turbocharger |
| Number of Connectors / Ports | 2 |
| Cable Length | 629 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 414 mm |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | EGR Valve |
| Number of Connectors / Ports | 2 |
| Cable Length | 262 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Length | 90 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Width | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without ball bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium, PU (Polyurethane) |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 445 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 82 mm |
| Function | Rubber Buffer, suspension |
| Width | 69 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Additional Information | with holder |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Width | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 240 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 185204 |
| Cone Size | 21 mm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 307 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 437 mm |
| Height | 53 mm |
| Width | 300 mm |
| Additional Information | with gasket/seal, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 150 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Cable Length | 340 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Switch, park brake actuation |
| Control Type | Button Actuation |
| Additional Information 2 | with control light |
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Function | Switch, park brake actuation |
| Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Placement on Vehicle | Upper, Front Axle Right |
| Paired article numbers | 185366 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179576)
- 2x Febi Bolt, control arm (175088)
- 1x Febi Nut (22263)
- 1x Febi Screw (31032)
Important compatibility info
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with fastening/mounting material |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper |
| Paired article numbers | 185365 |
| Cone Size | 18 mm |
| Steering arm type | Control Arm |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (179577)
- 2x Febi Bolt, control arm (175088)
- 1x Febi Nut (22263)
- 1x Febi Screw (31032)
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 50515057 SK |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 40.9 mm |
| Thickness | 40 mm |
| Inner diameter | 13.3 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Thickness | 46 mm |
| Outer diameter | 42.2 mm |
| Inner diameter | 12.1 mm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | outer, Rear Axle Left, Rear Axle Right, Upper, Front |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
| Outer diameter | 42.2 mm |
| Thickness | 46 mm |
| Inner diameter | 12.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























