Important compatibility info
| Length | 215 mm |
| Height | 30 mm |
| Width | 200 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 230 mm |
| Height | 35 mm |
| Width | 208 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 80 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Stop Light Switch |
| Switch point to | 10 bar |
| External Thread Size | M16 x 1,5 |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Colour | blue |
| for OE number | BN7N-66-490A |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Passenger Side |
| Number of Connectors / Ports | 9 |
| Combi Switch Function | Window Regulator |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Width | 38.2 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 299 mm |
| Height | 30 mm |
| Width | 213 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | inner, Front Axle Left, Front Axle Right |
| Length | 54 mm |
| Material | Rubber/Metal |
| Outer diameter | 34 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Number of Coils | 6 |
| Type | Suspension Spring |
| Outer diameter | 94 mm. 84 mm |
| Placement on Vehicle | Front Axle |
| Length | 414 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Multi-piece | One-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
| Length | 709 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 179899 |
| Placement on Vehicle | Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Stop Light Switch |
| Operating Mode | Electric |
| Housing Colour | Blue |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Lambda Sensor | Heated |
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust pressure |
| Sensor Type | Differential Pressure Sensor |
| Number of Connectors / Ports | 3 |
| Type | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 354 mm |
| Outer diameter | 55 mm |
| Number of Coils | 7.5 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Cone Size | 18 mm |
| Paired article numbers | 193640 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | L3K9-12-201A S3 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138. 62 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49713)
- 1x Febi Tensioner, timing chain (170098)
- 1x Febi Guide, timing chain (170101)
- 1x Febi Guide, timing chain (170103)
- 1x Febi Gear/Sprocket, camshaft (170108)
- 1x Febi Chain, oil pump drive (49777)
- 1x Febi Gear Set, oil pump (170113)
- 1x Febi Shaft Seal, crankshaft (107668)
- 1x Febi Chain Tensioner, oil pump drive (170121)
- 1x Febi Sprocket/Gear, oil pump (185201)
- 1x Febi Camshaft Adjuster (175357)
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 198149 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1350 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1137 mm |
| Additional Information | with oil drain plug, with gasket/seal |
| Material | PA (polyamide) |
| Additional Information 2 | with seal ring, with bolts/screws |
| Type | Oil Sump |
| Function | Oil Sump |
| Extra Description | ProKit |
| External Thread Size | M8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (37323)
- 2x Febi Protective Cap/Bellow, shock absorber (186508)
Important compatibility info
| Filter type | Pollen Filter |
| Length | 216 mm |
| Height | 30 mm |
| Width | 200 mm |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 250 mm |
| Height | 25 mm |
| Width | 234 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 206 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Length | 275 mm |
| Height | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 376 mm |
| Outer diameter | 242 mm |
| Inner diameter | 132 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 132 mm |
| Height | 51 mm |
| Length | 355 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Driver side |
| Type | Multi-Function Switch |
| Weight | 0.190 kg |
| Function | Multi-Function Switch |
| Additional Information 2 | with control light |
| Combi Switch Function | Window Regulator, with rear window heating function, Mirror Adjustment, Heated wing mirror on/off, Folding/tilting exterior mirrors, Door Locking |
| Number of Connectors / Ports | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.1 mm |
| Width | 52.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip, with staples |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Coils | 5.4 |
| Function | Suspension Spring |
| Outer diameter | 172 mm |
| Length | 425 mm |
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, boost pressure |
| Number of Connectors / Ports | 4 |
| Type | Sensor, boost pressure |
| for OE number | 51.27421.0169 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























