Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 158 mm |
| Outer diameter | 90 mm |
| Additional Information 2 | with seal ring |
| Filter type | In-Line Filter, with water drain screw, with connection for water sensor |
| Seal Diameter | 10 mm |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.70
Important compatibility info
| Inner diameter | 34 mm |
| Placement on Vehicle | Rear Axle, inner |
| Function | Mounting, stabiliser bar |
| Thickness | 65 mm |
| Material | Rubber with fabric lining |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.80
Important compatibility info
| Additional Information | with gasket/seal |
| Number of grooves | 4 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.24
Important compatibility info
| Length | 212 mm |
| Height | 79 mm |
| Width | 179 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.05
Important compatibility info
| Parameter | 6PK + 4PK |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 14 mm |
| Type | Belt Pulley, crankshaft |
| Width | 47 mm |
| Outer diameter | 145 mm |
| Number of Ribs | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£174.34
Important compatibility info
| Outer diameter 1 | 71 mm |
| Width | 44.4 mm |
| Outer diameter | 76 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.68
Important compatibility info
| Filter type | Filter Insert |
| Type | Air filter kit |
| Height | 50 mm |
| Width | 130 mm |
| Length | 290 mm |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.84
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front, Front Axle Right |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Control Arm |
| Paired article numbers | 185576 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut |
| Paired article numbers | 186569 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26096)
- 1x Febi Inner Tie Rod (185895)
£34.49
Important compatibility info
| Material | Metal |
| Outer diameter | 50 mm |
| Function | Tensioner Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Tensioner Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.42
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Length | 333 mm |
| Height | 54 mm |
| Width | 171 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.70
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 152 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11008)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (11904)
- 1x Febi Tensioner Pulley, timing belt (29389)
£67.97
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 1J0 721 261 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.55
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.49
Important compatibility info
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Brake Disc Thickness | 22 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Centering Diameter | 68 mm |
| Number of mounting bores | 1 |
| for OE number | 8K0 615 601 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.79
Important compatibility info
| Material | Steel |
| Function | Gasket, exhaust manifold |
| Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.89
Important compatibility info
| Outer diameter | 88.35 mm |
| Thickness | 19.2 mm |
| Function | Packing Plate, drive shaft flange |
| Placement on Vehicle | transmission sided, Front Axle |
| Material | Thermoplastic polyester elastomer |
| Type | Packing Plate, drive shaft flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.70
Important compatibility info
| Material | Stainless Steel |
| Outer diameter | 95 mm |
| Type | Gasket, exhaust pipe |
| Function | Gasket, exhaust pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.58
Important compatibility info
| Function | Fuel filter |
| Outer diameter | 93 mm |
| Filter type | Filter Insert, with water separator |
| Height | 139 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.72
Important compatibility info
| Opening Pressure | 1.45 bar |
| Function | Cap, coolant tank |
| for OE number | 1 301 104 |
| Type | Cap, coolant tank |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.41
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023