Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 96 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 88 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (194039)
- 1x Febi Molybdenum Grease (02582)
£21.25
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 1 |
| for OE number | 74 82 158 843 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 690 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 585 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.21
Important compatibility info
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Number of grooves | 8 |
| Operating Mode | electromagnetic |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Housing material | Aluminium |
| for OE number | 2104 574 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£370.75
Important compatibility info
| Operating Mode | electromagnetic |
| Seal Material | Rubber |
| Housing material | Aluminium |
| Number of grooves | 6 |
| Number of Wings | 8 |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£373.72
Important compatibility info
| Seal Material | Rubber |
| Housing material | Aluminium |
| Number of Wings | 6 |
| Number of grooves | 8 |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| for OE number | 2104 578 |
| Operating Mode | electromagnetic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£285.61
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 717 mm |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 80.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Type | Condenser, air conditioning |
| Core Width | 531 mm |
| Function | Condenser, air conditioning |
| Core Length | 540 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.79
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.64
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| for OE number | 58 51 073 |
| Type | Pressure converter, turbocharger |
| Function | Pressure converter, turbocharger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.63
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| Paired article numbers | 182023 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 589 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Internal Teeth, wheel side | 21 |
| External Teeth, Wheel Side | 24 |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Function | Joint Kit, drive shaft |
| ABS Ring Diameter | 76 mm |
| Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.89
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 28 |
| Number of Teeth, ABS ring | 43 |
| ABS Ring Diameter | 72 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.10
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Internal Teeth, wheel side | 20 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.67
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 21 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.41
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 24 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.76
Important compatibility info
| Function | Cable Pull, manual transmission |
| Outer Length | 3371 mm |
| Inner Length | 2940 mm |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.87
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10x1,5 |
| Paired article numbers | 182444 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 918 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M18 x 1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 635 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 88 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.88
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.24
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 27 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Thread Size | M10 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Right |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.47
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 79 mm |
| External Teeth, Wheel Side | 21 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 22 |
| Thread Size | M20 x 1,5 |
| Min. Length | 798 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 620 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.63
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.36
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1573 mm |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1880 mm |
| Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Type | Propshaft, axle drive |
| Length | 1493 mm |
| Function | Propshaft, axle drive |
| Multi-piece | two-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£370.50
Important compatibility info
| Placement on Vehicle | Right |
| Length | 220 mm |
| Material | Plastic |
| Paired article numbers | 192736 |
| Colour | silver |
| Surface | Chromed |
| Type | Door Handle, interior equipment |
| Function | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.94
Important compatibility info
| Length | 1550 mm |
| Multi-piece | two-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£409.39
Important compatibility info
| Core Width | 686 mm |
| Function | Condenser, air conditioning |
| Refrigerant | R 134a |
| Core Length | 451 mm |
| Type | Condenser, air conditioning |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.42
Important compatibility info
| Core Depth | 16 mm |
| Core Width | 475 mm |
| Core Length | 531 mm |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
| Additional Information 2 | with dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.80
Important compatibility info
| Core Width | 525 mm |
| Core Length | 392 mm |
| Type | Condenser, air conditioning |
| Core Depth | 12 mm |
| Refrigerant | R 134a |
| Function | Condenser, air conditioning |
| Additional Information 2 | with dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.64
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 107 mm |
| Outer diameter | 35 mm |
| Spanner Size | 18 |
| Thread Length | 41 mm |
| Type | Camber Correction Screw |
| Function | Camber Correction Screw |
| Screw length below head | 97 mm |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (14392)
- 1x Febi Washer (177872)
- 1x Febi Camber Correction Screw (188574)
£12.69
Important compatibility info
| Thread Size | M10x1,5 |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thread Size | M10x1,5 |
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.41
Important compatibility info
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 33 |
| Number of Teeth, ABS ring | 43 |
| ABS Ring Diameter | 82 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.44
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.57
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 17 mm |
| Length | 204.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Width | 101.6 mm |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.51
Important compatibility info
| Placement on Vehicle | Front |
| Length | 715 mm |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£232.15
Important compatibility info
| Placement on Vehicle | Front |
| Length | 1036 mm |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
| Multi-piece | one-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£245.41
Important compatibility info
| Length | 983 mm |
| Width | 25 mm |
| Thickness | 56 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Hole Spacing | 257 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.76
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Right |
| Thread Size | M10x1,5 |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 28 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.37
Important compatibility info
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 21 |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 76 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.57
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 176 mm |
| Inspection Tag | ECE R90 Approval |
| Thickness/Strength 1 | 3.8 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.50
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£1,739.09
Important compatibility info
| Outer diameter | 23 mm |
| Material | Steel |
| Surface | Zink flake coated |
| Thread Length | 17 mm |
| Type | Screw Plug, oil sump |
| Length | 27 mm |
| Spanner Size | 17 |
| Screw length below head | 17 mm |
| External Thread Size | M14 x 1,5 |
| Function | Screw Plug, oil sump |
| Bolt Head/Nut Design | External Hexagon |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, oil sump (193882)
- 1x Febi Seal Ring, oil drain plug (32456)
£7.80
Important compatibility info
| Type | Socket Wrench Insert, oil drain plug |
| Length | 35 mm |
| Diameter 1 | 27 mm |
| Material | Aluminium |
| Spanner Size | 17 |
| Function | Socket Wrench Insert, oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023