Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 196 mm |
| Outer diameter | 100 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 30 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 135.6 mm |
| Gasket inner diameter | 125.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.99
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information | with rubber-metal mounts |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 195000 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.25
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 210 mm |
| Additional Information | with lock nut |
| Spanner Size | 19 |
| Paired article numbers | 195006 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size 2 | 16 mm |
| Cone Size 1 | 12 mm |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.00
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 175 mm |
| Additional Information 2 | with nut |
| Paired article numbers | 195004 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size 2 | 16 mm |
| Cone Size 1 | 13.6 mm |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.99
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 169 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 17 |
| Paired article numbers | 195005 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.53
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 175 mm |
| Additional Information 2 | with nut |
| Paired article numbers | 195002 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size 2 | 16 mm |
| Cone Size 1 | 13.5 mm |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.99
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 169 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 17 |
| Paired article numbers | 195003 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 210 mm |
| Additional Information | with lock nut |
| Spanner Size | 19 |
| Paired article numbers | 195001 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Cone Size 2 | 16 mm |
| Cone Size 1 | 12 mm |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.00
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 892 mm |
| Inner length 2 | 880 mm |
| Outer length 1 | 1230 mm |
| Outer length 2 | 1166 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.52
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | MQ200 |
| Inner length 1 | 852 mm |
| Outer length 1 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | BE4R |
| Inner length 1 | 651 mm |
| Inner length 2 | 661 mm |
| Outer length 1 | 911 mm |
| Outer length 2 | 857 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | F17 |
| Inner length 1 | 847 mm |
| Inner length 2 | 870 mm |
| Outer length 1 | 1150 mm |
| Outer length 2 | 1172 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Control Element, parking brake caliper |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Extra Description | febi Plus |
| Number of Teeth | 6 |
| Type | Control Element, parking brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.79
Important compatibility info
| Type | Control Element, parking brake caliper |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Control Element, parking brake caliper |
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 195054 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.79
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 195053 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.79
Important compatibility info
| Transmission Type | 5-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | C510 |
| Inner length 1 | 849 mm |
| Outer length 1 | 1174 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.27
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1034 mm |
| Inner length 2 | 890 mm |
| Outer length 1 | 1249 mm |
| Outer length 2 | 1157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 167 mm |
| Outer diameter | 71.6 mm |
| Thread Size | M8x1,25 |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 44 mm |
| Internal Teeth, wheel side | 19 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.39
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 26 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| External Teeth, Wheel Side | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.97
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting bores distance | 476 mm |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Shock Absorber Type | Gas Pressure |
| Min. Length | 306 mm |
| Bore Diameter | 12 mm. 14 mm |
| Pipe Diameter | 61 mm. 45 mm |
| Max. Length | 476 mm |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.66
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.78
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 33 |
| Min. Length | 916 mm |
| Wheel Sided Joint Diameter | 77.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (40699)
- 2x Febi Protective Cap/Bellow, shock absorber (103958)
£29.51
Important compatibility info
| Function | Holder, exterior mirror |
| Type | Holder, exterior mirror |
| Driver Position | for left-hand/right-hand drive vehicles |
| Material | PA (polyamide) |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 42 |
| Internal Teeth, wheel side | 29 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.79
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 122 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (188374)
- 1x Febi Tensioner, timing chain (179666)
- 2x Febi Guide, timing chain (170433)
- 1x Febi Guide, timing chain (180239)
- 1x Febi Timing Chain (188690)
- 1x Febi Tensioner, timing chain (182152)
- 1x Febi Guide, timing chain (178710)
£258.88
Important compatibility info
| Length | 200 mm |
| Type | Wide-Angle Mirror |
| Width | 190 mm |
| Outer/Inner Mirror | Heatable |
| Placement on Vehicle | Driver side |
| Operating Mode | Electric |
| Thickness | 43 mm |
| Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
| Function | Wide-Angle Mirror |
| Camber Radius | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth | 101 |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (173885)
- 1x Febi Tensioner Pulley, timing belt (174014)
£49.92
Important compatibility info
| Additional Information 2 | with filter |
| Filter type | with water separator, with connection for water sensor |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cover, fuel filter (192757)
- 1x Febi Water Separator, fuel system (185556)
- 1x Febi Fuel filter (29454)
£171.14
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 892 mm |
| ABS Ring Diameter | 99 mm |
| Transmission-side joint diameter | 77 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.11
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.52
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 22 |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 80 mm |
| Transmission-side joint diameter | 69 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Bolt Hole Circle Diameter | 104 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Min. Length | 813 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.53
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 799 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 92 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.09
Important compatibility info
| Max. Length | 511 mm |
| Min. Length | 326 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Bore Diameter | 15 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Shock Absorber |
| Piston conrod diameter | 28 mm |
| Pipe Diameter | 58 mm |
| Mounting bores distance | 87 mm. 57 mm |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.07
Important compatibility info
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Min. Length | 339 mm |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Max. Length | 518 mm |
| Paired article numbers | 193112 |
| Placement on Vehicle | Front Axle Right |
| Mounting points diameter | 13 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.28
Important compatibility info
| Paired article numbers | 193111 |
| Mounting points diameter | 13 mm |
| Placement on Vehicle | Front Axle Left |
| Piston conrod diameter | 22 mm |
| Max. Length | 518 mm |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Shock Absorber System | Twin-Tube |
| Min. Length | 339 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 51 mm |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.28
Important compatibility info
| Type | Shock Absorber |
| Bore Diameter | 14 mm |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 45 mm |
| Max. Length | 535 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Min. Length | 350 mm |
| Shock Absorber Type | Gas Pressure |
| Piston conrod diameter | 20 mm |
| Mounting bores distance | 60 mm |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber Design | Spring-bearing Damper |
| Max. Length | 422 mm |
| External Thread Size | M10 x 1,25 |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Pipe Diameter | 45 mm |
| Piston conrod diameter | 10 mm |
| Min. Length | 308 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 14 mm |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.69
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 14 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Mounting bores distance | 83 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 340 mm |
| Max. Length | 515 mm |
| Pipe Diameter | 58 mm |
| Piston conrod diameter | 28 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| Max. Length | 363 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 12 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 10 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| External Thread Size | M10 x 1,25 |
| Shock Absorber Type | Oil Pressure |
| Pipe Diameter | 53 mm. 45 mm |
| Min. Length | 236 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.14
Important compatibility info
| Piston conrod diameter | 22 mm |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M12 x 1,25 |
| Bore Diameter | 14 mm |
| Max. Length | 526 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber Design | Suspension Strut |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Pipe Diameter | 51 mm |
| Min. Length | 355 mm |
| Mounting bores distance | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Bore Diameter | 14 mm |
| Mounting bores distance | 75 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Pipe Diameter | 58 mm |
| Min. Length | 401 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber |
| Max. Length | 607 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Shock Absorber Design | Suspension Strut |
| Piston conrod diameter | 25 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.90
Important compatibility info
| Piston conrod diameter | 22 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Min. Length | 349 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Pipe Diameter | 54 mm. 38 mm |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Max. Length | 539 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.80
Important compatibility info
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Mounting bores distance | 478 mm |
| Bore Diameter | 14 mm |
| Min. Length | 317 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Function | Shock Absorber |
| Max. Length | 478 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.81
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Pipe Diameter | 54 mm. 45 mm |
| Min. Length | 331 mm |
| Mounting bores distance | 446 mm |
| Max. Length | 446 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Bore Diameter | 12 mm. 13 mm |
| Type | Shock Absorber |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.38
Important compatibility info
| Pipe Diameter | 53 mm. 45 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Min. Length | 327 mm |
| Max. Length | 522 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Bore Diameter | 14 mm |
| Mounting bores distance | 522 mm |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.62
Important compatibility info
| Type | Shock Absorber |
| Max. Length | 571 mm |
| Piston conrod diameter | 25 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Pipe Diameter | 58 mm |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Min. Length | 322 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.32
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Mounting bores distance | 75 mm |
| Shock Absorber Type | Gas Pressure |
| Max. Length | 573 mm |
| Bore Diameter | 14 mm |
| Min. Length | 369 mm |
| Type | Shock Absorber |
| Piston conrod diameter | 28 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.58
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023