Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear, Lower |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.39
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 30 |
| Outer diameter 1 | 84 mm |
| Outer diameter 2 | 52 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.42
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal, Cast Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.62
Important compatibility info
| Width | 44 mm |
| Operating Mode | Automatic |
| Housing material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.31
Important compatibility info
| Number of Teeth | 136 |
| Function | Timing Belt Kit |
| Track rollers material | Metal |
| Type | Timing Belt Kit |
| Width | 26 mm |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11000)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (06983)
- 1x Febi Tensioner Pulley, timing belt (04751)
£69.32
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 48 mm |
| Outer diameter | 84 mm |
| Inner diameter | 49 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.56
Important compatibility info
| Paired article numbers | 32046 |
| Placement on Vehicle | Left Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 15.5 mm |
| Housing length | 208.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.95
Important compatibility info
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 124 mm |
| Thickness | 23 mm |
| Number of Holes | 6 |
| Mounting points diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.89
Important compatibility info
| Width | 40 mm |
| Additional Information 2 | with flange |
| Inner diameter 1 | 43 mm |
| Inner diameter 2 | 45 mm |
| Outer diameter 1 | 82 mm |
| Outer diameter 2 | 85 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Outer diameter | 86 mm |
| Inner diameter | 50 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Width | 55.2 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Width | 40.5 mm |
| Outer diameter | 102 mm |
| Inner diameter | 61 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Replaces | 34823 |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Screw (31324)
- 1x Febi Wheel Bearing (30270)
£29.44
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G53RT, G53RING |
| Additional Information | with slide rails, with chain tensioner |
| for OE number | 13506-22030 S1 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31006)
- 1x Febi Tensioner, timing chain (32689)
- 1x Febi Guide, timing chain (32690)
- 1x Febi Guide, timing chain (32691)
£81.37
Important compatibility info
| Outer diameter | 79 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 30 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.48
Important compatibility info
| Additional Information | with nuts |
| Outer diameter 1 | 65.4 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 68 mm |
| Outer diameter | 70 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Outer diameter 2 | 140 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.93
Important compatibility info
| Outer diameter | 71 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.44
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.66
Important compatibility info
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| for OE number | 46515152 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.62
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Brake Shoe Pin Set |
| Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Brake Shoe Bolt (03963)
- 2x Febi Bush, brake shoe pin (05342)
- 4x Febi Seal Ring (05334)
- 4x Febi Cover Ring, brake-shoe pin bore (06458)
- 1x Febi Retaining Plate, brake shoe pins (06955)
- 1x Febi Retaining Plate, brake shoe pins (06456)
- 1x Febi Screw (06262)
- 1x Febi Retaining Plate, brake shoe pins (06457)
£27.17
Important compatibility info
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Length | 1570 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.19
Important compatibility info
| Length | 145 mm |
| Placement on Vehicle | Front Axle Right |
| Thread Length | 107 mm |
| Thread Type | with right-hand thread |
| Cone Size | 28.9 mm |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.53
Important compatibility info
| Function | Angled Ball Joint, steering push rod |
| Replaces | 24607 |
| External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
| Length | 140 mm |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.22
Important compatibility info
| Inner diameter | 153 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 176 mm. 196 mm |
| Function | Sensor Ring, ABS |
| Thickness | 16 mm |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.00
Important compatibility info
| Function | Ball Head, gearshift linkage |
| Length | 85 mm |
| Type | Ball Head, gearshift linkage |
| External Thread Size | M14 x 1,5, M10 x 1 |
| Extra Description | ProKit |
| Cone Size | 12.5 mm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.56
Important compatibility info
| Length | 120 mm |
| Width | 55 mm |
| Material | Rubber/Metal |
| Thickness | 54 mm |
| Mounting points diameter | 9 mm |
| Placement on Vehicle | Rear Axle |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.31
Important compatibility info
| Voltage | 28.5 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Length | 1538 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1688 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Function | Cap, fuel tank |
| Extra Description | febi Plus |
| Type | Cap, fuel tank |
| Lockable | Lockable |
| Material | Plastic |
| Lock System | with two keys, with lock |
| Additional Information | with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.70
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 19 mm |
| Function | Repair Kit, control/trailing arm |
| Length | 150 mm |
| Outer diameter | 75 mm |
| Thickness | 24 mm |
| Steering arm type | for trailing arm, for triangular control arm (CV) |
| Hole Spacing | 115 mm |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.84
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023