Proud to be a UK-based company
Contact us
Part number: PWN186
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Title | Adhesive Rear View Mirror Pad |
Additional Information
Mirrors are an essential part of your car when driving - ensuring that you have a good vision of what's behind you means you are better equipped to anticipate the actions of other drivers, helping to prevent accidents and avoid hazards. Mirrors are also vital when performing parking manoeuvres with the car. This interior rear view mirror by Summit fits directly to your windscreen via the double sided adhesive tape attached to the back of the mirror. This replacement can be applied directly to the glass after heating. It is quick and easy to fit the mirror measures approximately 40mm x 28mm (L x W) and is manufactured in high quality plastic. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Heat screen first
- Use in warm dry conditions
- Double sided adhesive mirror pad to refit interior mirror
ONLY
£3.80
£3.80
Part number: PWN187
Important compatibility info
| Title | Bypass Hose Clip - British Leyland A Series |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Supplied with clips
- Flexible rubber, replacement for the solid OE type
- Replacement hose & clip for the bypass from cylinder head to water pump
ONLY
£4.51
£4.51
Part number: PWN189
Important compatibility info
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This Wot-nots Automatic Brake Bleed Tube is made of soft rubber, connects to a bleed valve and has a split the other end allowing fluid to be expelled into a container. The split is normally held below the fluid level in a container to stop air ingress. Brake fluid resistant to stop corrosion when not in use. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Brake fluid resistant
- The split is normally held below the fluid level in a container to stop air ingress
- Brake bleed tube made of soft rubber, connect to a bleed valve and has a split the other end allowing fluid to be expelled into a container
ONLY
£4.28
£4.28
Part number: PWN195
Important compatibility info
| Title | Battery Terminal - Heavy Duty Positive |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This battery terminal from Pearls, Pearly WotNots range is for the positive battery terminal. It is made from heavy duty metal which has been Cadnium plated, and will accept an 8mm cable clamped with two bolts.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Batteries are a complex and hazardous element which are found inside a vehicle. Making sure that they are well maintained is key. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This pack of battery terminals from Wot-Nots are positive replacements. They are made from heavy duty non corrosive brass that is Cadmium plated. Suitable for 8mm cable clamped with two bolts. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Pack of 1
- Suitable for 8mm cable clamped with two bolts
- Cadmium plated
- Heavy duty replacement positive battery terminal
ONLY
£7.66
£7.66
Part number: PWN196
Important compatibility info
| Title | Battery Terminal - Heavy Duty Negative |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
This battery terminal from Pearl's, Pearly WotNots range is for the negative battery terminal. It is made from heavy duty metal which has been Cadnium plated, and will accept an 8mm cable.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Batteries are a complex and hazardous element which are found inside a vehicle. Making sure that they are well maintained is key. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This pack of battery terminals from Wot-Nots are negative replacements. They are made from heavy duty non corrosive brass that is Cadmium plated. Suitable for 8mm cable clamped with two bolts. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Pack of 1
- Suitable for 8mm cable clamped with two bolts
- Cadmium plated
- Heavy duty replacement negative battery terminal
ONLY
£7.66
£7.66
Part number: PWN199
Important compatibility info
| Title | Battery Terminal - Post Converter |
Additional Information
Batteries are a complex and hazardous element which are found inside a vehicle. Making sure that they are well maintained is key. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This pack of battery terminals from Wot-Nots are positive replacements. This battery clamp is for bolting an existing ring terminal battery cable directly onto the clamp. Made from flexible metal. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Pack of 1
- Made from flexible metal
- Battery clamp for bolting an existing ring terminal battery cable directly onto the clamp
ONLY
£6.98
£6.98
Part number: PWN200
Important compatibility info
| Title | Fuse Holder - Self Stripping Blade Type - Blue |
Additional Information
Nowadays our cars, vans and trucks all use a wide range of fuses as part of their electrical systems and without them many of the electrical applications just will not function. So it is important that you have spares on hand for the times when you have the odd blown fuse. This self-stripping blade fuse holder from Wot-Nots has been designed to suit all your electrical needs. This particular fuse holder is suitable for standard blade fuses complete with a male tag terminal both ends. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Require pliers to use
- No connectors required just insert the two cables into the scotch lock self stripping housing and clamp
- Fuse holder to take the standard blade fuse
ONLY
£4.57
£4.57
Part number: PWN203
Important compatibility info
| Title | On/Off/On Toggle Switch - Non Illuminated |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of their Pearly WotNots range Pearl supply a range of replacement/spare switches suitable for automotive use. This switch is a mini on/off/on toggle type switch that is compatible with 12V 20 amp vehicle electrics. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- 20A
- 12V
- Plastic construction
- On/Off/On toggle switch
ONLY
£4.95
£4.95
Part number: PWN205
Important compatibility info
| Title | Medium Lever Flasher Switch |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of their Pearly WotNots range Pearl supply a range of replacement/spare switches suitable for automotive use. This switch is a an medium lever flasher switch that is compatible with 12V 20 amp vehicle electrics. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Plastic construction
- 12V 20A
- Flasher switch medium lever
ONLY
£4.58
£4.58
Part number: PWN212
Important compatibility info
| Title | On/Off Rectangular Rocker Switch - Red Illuminated |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of their Pearly WotNots range Pearl supply a range of replacement/spare switches suitable for automotive use. This switch is a rectangular rocker type switch that is compatible with 12V 16 amp vehicle electrics. It is red illuminated and fits a hole 12mm by 30mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Fits hole 12 x 30mm
- 12V 16A
- Plastic construction
- On/Off illuminated rectangular
ONLY
£4.95
£4.95
Page 59759 of 59823
Featured brands
Reviews
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
RS
R SSept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
MT
Mark TSept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
GR
Graham PSept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
DP
David PAug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
DB
Daniel BAug 2023