Important compatibility info
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 44 mm |
| Width | 6 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Inner diameter | 32 mm |
| Placement on Vehicle | frontal sided |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 |
| for OE number | 93179927 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 60 mm |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 180681 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 60 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 180680 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 005 466 03 01 |
| Operating pressure to | 12 bar |
| Internal Thread Size | M16 x 1,5 |
| Function | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Pulleys | with belt pulley |
| Mounting points diameter | 9 mm |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Type | Cable Repair Kit, glow plug |
| Function | Cable Repair Kit, glow plug |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 190 mm |
| Eject Force | 390 N |
| Housing Diameter | 18 mm |
| Mounting points diameter | 16.5 mm |
| Length | 534 mm |
| Housing length | 305 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 389 mm |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 220 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 138 mm |
| Housing Diameter | 22 mm |
| Eject Force | 260 N |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Placement on Vehicle | Left Rear |
| Stroke | 177 mm |
| Eject Force | 145 N |
| Housing Diameter | 18 mm |
| Housing length | 289 mm |
| Length | 513 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Diameter | 18 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 674 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 330 N |
| Stroke | 234 mm |
| Mounting points diameter | 17.8 mm |
| Housing length | 388.5 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 271.5 mm |
| Stroke | 194 mm |
| Mounting points diameter | 17.8 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Placement on Vehicle | both sides |
| Length | 495 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 68 mm |
| Material | PU (Polyurethane) |
| Width | 64 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 191 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 600 N |
| Housing Diameter | 19 mm |
| Length | 598 mm |
| Housing length | 329 mm |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Cable Length | 700 mm |
| Number of Connectors / Ports | 2 |
| Outer diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Left |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Actuator, central locking system |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Extra Description | febi Plus |
| Function | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Camshaft |
| Paired article numbers | 176837 |
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Colour | Green |
| Function | Cap, power steering fluid reservoir |
| Type | Cap, power steering fluid reservoir |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Width | 67 mm |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 90 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 93 mm |
| Width | 70 mm |
| Type | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 106 mm |
| Width | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1102 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























