Important compatibility info
| Type | Sensor, fuel pressure |
| Number of Connectors / Ports | 3 |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 60 mm |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| for OE number | GS1G-39-040A |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 3 |
| Length | 714 mm |
| Type | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 42 mm |
| Width | 40 mm |
| Material | Rubber |
| Thickness | 40 mm |
| Inner diameter | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 47 mm |
| Width | 45 mm |
| Thickness | 46 mm |
| Material | Rubber |
| Inner diameter | 21 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2. 10 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Length | 192 mm |
| Height | 60 mm |
| Width | 162 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Type | Air Filter |
| Outer diameter | 82 mm |
| Inner diameter | 73 mm |
| Height | 312 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, differential |
| Type | Mounting, differential |
| Inner diameter | 12.75 mm |
| Thickness | 61 mm |
| Outer diameter | 61.05 mm |
| Placement on Vehicle | Rear Axle, Front |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Paired article numbers | 182583 |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 6 860 488 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 182582 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 182597 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 12 mm |
| Material | Sheet Steel |
| Length | 298 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 12 mm |
| Material | Sheet Steel |
| Length | 298 mm |
| Placement on Vehicle | Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
| Paired article numbers | 182596 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Centre, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 61.8 mm |
| Thickness | 54 mm |
| Inner diameter | 68.7 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear, Front |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 109350 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1070 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 335 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left, Lower |
| Material | Rubber/Metal |
| Outer diameter | 44.9 mm |
| Thickness | 40 mm |
| Inner diameter | 14.4 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 51 mm |
| Inner diameter | 14.1 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Outer diameter | 55.1 mm |
| Placement on Vehicle | Front, Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Length from grip collar to max. marking | 1722 mm |
| Length from grip collar to min. marking | 1639 mm |
| Colour | Red |
| Type | Oil Dipstick |
| Function | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 69.2 mm |
| Thickness | 83 mm |
| Inner diameter | 14.2 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Length | 294 mm |
| Diameter | 48 mm |
| External Thread Size | M16 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Additional Information | with gasket/seal, without adjusting element |
| Colour | Black |
| Material | Plastic |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (181564)
- 1x Febi Gasket, intake manifold (182287)
- 1x Febi Gasket, intake manifold housing (182288)
Important compatibility info
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with adjuster |
| Material | Plastic |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fitting, intake manifold (181564)
- 1x Febi Gasket, intake manifold (182287)
- 1x Febi Gasket, intake manifold housing (182288)
- 1x Febi Control, swirl flaps (induction pipe) (170534)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























