Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1628 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1613 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 415 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, automatic transmission oil sump |
| Material | Rubber |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 53.6 mm |
| Outer diameter | 290 mm |
| Thickness | 84.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 50.2 mm |
| Max.skimmed drum measure | 231.5 mm |
| Inner Brake Drum Diameter | 230 mm |
| Function | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 1.8 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 150 mm |
| Material | Rubber |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 95 mm |
| Type | Bellow, drive shaft |
| Function | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 150 mm |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 95 mm |
| Function | Bellow Kit, drive shaft |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14298)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45646)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
| Shifting Points | 3 bar |
| Operating Mode | Electric |
| Additional Information | with fuel sender unit |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Number of Teeth | 135 |
| Width | 19 mm |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 26.5 mm |
| Number of Teeth | 122 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 18 mm |
| Number of Teeth | 124 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Duplex, with chain lock |
| Function | Link, timing chain |
| Timing Chain Size | D67HP |
| Type | Link, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 82 mm |
| Inner diameter | 44 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (14536)
- 1x Febi Circlip (14537)
Important compatibility info
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Inner diameter | 12 mm |
| Material | Plastic |
| Outer diameter | 60 mm |
| Width | 24 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Units / Pulleys | incl. tensioner pulley |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 121 |
| Width | 18 mm |
| Type | Timing Belt Kit |
| for OE number | 026 109 119 B S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (12654)
- 1x Febi Tensioner Pulley, timing belt (06688)
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 137 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Replaces | 11061 |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11039)
- 1x Febi Tensioner Pulley, timing belt (10294)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07078)
Important compatibility info
| Colour | black |
| Placement on Vehicle | both sides |
| Length | 544 mm |
| Paired article numbers | 14657 |
| Housing Diameter | 18 mm |
| Eject Force | 440 N |
| Stroke | 234 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 293.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 27 mm |
| Outer diameter | 73 mm |
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 258 mm |
| Height | 33 mm |
| Width | 168 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Replaces | 14747 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 85 mm |
| Material | Thermoplast |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 78 mm |
| Length | 85 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14768)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Replaces | 17900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 85 mm |
| Material | Thermoplast |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 74 mm |
| Type | Bellow, drive shaft |
| Function | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 161 mm |
| Filter type | Pollen Filter |
| Length | 348 mm |
| Height | 30 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Width | 245 mm |
| Height | 32 mm |
| Length | 359 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Valve Guide |
| Valve type | for exhaust valves |
| Type | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 94 mm |
| Material | Rubber |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 75 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 99 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 99 mm |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14908)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Material | PU (Polyurethane) |
| Thickness | 43 mm |
| Colour | Red |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Outer diameter | 21 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 45.5 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Replaces | 10892 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Number of Holes | 6 |
| Material | Rubber/Metal |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information 2 | with bolts/screws, with washers |
| Replaces | 14976; 14994 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (15351)
- 6x Febi Screw (19106)
- 3x Febi Screw (03703)
- 1x Febi Assembly Kit, propshaft joint (22118)
Important compatibility info
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
| Additional Information 2 | with studs |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 47 mm |
| Inner diameter | 30 mm |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | frontal sided |
| Material | FPM (fluoride rubber) |
| Outer diameter | 57 mm |
| Thickness | 7 mm |
| Inner diameter | 45 mm |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Outer diameter | 128 mm |
| Number of Holes | 6 |
| Thickness | 20 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Extra Description | ProKit |
| Placement on Vehicle | Front, Rear |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (07543)
- 6x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
| Additional Information 2 | with lid |
| Width | 23 mm |
| Outer diameter | 55.5 mm. 61 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| Width | 42 mm |
| for OE number | 611 155 02 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | without valve cover gasket |
| Material | Rubber |
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Seal Ring, cylinder head cover bolt (15190)
- 3x Febi Seal Ring, cylinder head cover bolt (15188)
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































