Important compatibility info
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Length | 625 mm |
| Mounting points diameter | 17 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 550 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before exhaust turbocharger |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 92 mm |
| Material | Rubber |
| Paired article numbers | 48824 |
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 74 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171746)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 130 mm |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172874)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 119 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,75 |
| Spanner Size | 21 |
| Paired article numbers | 178480 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 300 mm |
| Width | 600 mm |
| Type | Mudflap |
| Function | Mudflap |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material |
| Core Width | 134 mm |
| Core Depth | 22 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Hub |
| Width | 320 mm |
| Outer diameter | 320 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 150 mm |
| Bolt Hole Circle Diameter | 275 mm |
| Placement on Vehicle | Rear Axle |
| Inner diameter 1 | 130 mm |
| Type | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 169 mm |
| Voltage | 7 V |
| Glow Plug Type | Metal glow plug |
| Spanner Size | 10 |
| External Thread Size | M10 x 1 |
| Function | Glow Plug |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Cable Length | 420 mm |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Thread Size | M27 x 1,5 |
| Additional Information | with nuts |
| Length | 765 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 8 |
| Type | Relay, glow plug system |
| Function | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 560 mm |
| Cone Size | 30 mm |
| Type | Slave Cylinder, power steering |
| Function | Slave Cylinder, power steering |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Pipe Diameter | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 860 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 920 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 55 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Connector Shape | oval |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 98 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 56 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22607)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Nut, kingpin (02346)
Important compatibility info
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Length | 110 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (102995)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Thickness | 1 mm |
| Inner diameter | 52 mm |
| Function | Gasket, throttle body |
| Width | 86 mm |
| Length | 80 mm |
| Material | Steel |
| Type | Gasket, throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Switch, reverse light |
| Function | Switch, reverse light |
| Transmission Type | 6-Speed Manual Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 91 mm |
| Material | Rubber |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100302)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (29820)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Material | FKM (fluorocarbon rubber) |
| Height | 8.65 mm |
| Outer diameter | 134.2 mm |
| Inner diameter | 113 mm |
| Type | Gasket, fuel pump |
| Function | Gasket, fuel pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Holder, engine mounting system |
| Type | Holder, engine mounting system |
| Paired article numbers | 183118 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Placement on Vehicle | Lower |
| Type | Control Valve, camshaft adjustment |
| for OE number | 06K 115 243 Q |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 2 | 84 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175500)
- 1x Febi Molybdenum Grease (02582)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























