Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 577 mm |
| Housing Diameter | 18 mm |
| Eject Force | 270 N |
| Stroke | 225 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 319 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.84
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 12 mm |
| Outer diameter | 67 mm |
| Thickness | 8 mm |
| Inner diameter | 45 mm |
| Function | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Type | Shaft Seal, crankshaft |
| for OE number | 023 997 84 47 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.94
Important compatibility info
| Height | 465 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 310 mm |
| Inner diameter | 178 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.07
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 192 mm |
| Thickness | 57 mm |
| Paired article numbers | 48202 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.57
Important compatibility info
| Width | 42.3 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.49
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 82 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.50
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 86 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (30422)
- 2x Febi Protective Cap/Bellow, shock absorber (38240)
£17.95
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 106711 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.61
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 366 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.25
Important compatibility info
| for OE number | 06H 109 021 J |
| Type | Camshaft |
| Function | Camshaft |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£213.35
Important compatibility info
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 12 mm |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.15
Important compatibility info
| Additional Information 2 | with fastening material, with ball bearing |
| Placement on Vehicle | Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Inner diameter | 33 mm |
| Material | Rubber/Metal |
| Width | 119 mm |
| Height | 65 mm |
| Length | 131 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (104215)
- 1x Febi Nut (174654)
- 3x Febi Nut (174655)
- 1x Febi Washer (174649)
£41.70
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Bellow, steering |
| Type | Bellow, steering |
| Inner diameter 2 | 54 mm |
| Inner diameter 1 | 15 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 191 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (26875)
£20.52
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (33117)
£14.94
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Rear |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.87
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36788)
- 2x Febi Protective Cap/Bellow, shock absorber (180463)
£19.84
Important compatibility info
| Paired article numbers | 181129 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.67
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (103830)
£19.86
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (08384)
- 2x Febi Protective Cap/Bellow, shock absorber (02557)
£14.15
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Length | 208 mm |
| Additional Information | with counter nut |
| Outer diameter | 40 mm |
| Spanner Size | 38 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.88
Important compatibility info
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£1,065.73
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 71739541 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.63
Important compatibility info
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.39
Important compatibility info
| Additional Information | with axle nut |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 82.5 mm |
| Inner diameter | 44 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Filter type | Filter Insert |
| Inner diameter | 120 mm |
| Outer diameter | 187 mm. 206 mm |
| Height | 591 mm |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.99
Important compatibility info
| Material | PU (Polyurethane) |
| Number of Connectors / Ports | 2 |
| Cross Section | 35 mm² |
| Working length | 3.5 m |
| Function | Coiled Cable |
| Weight | 3.751 kg |
| Type | Coiled Cable |
£142.29
Important compatibility info
| Housing length | 209 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 117 mm |
| Eject Force | 470 N |
| Length | 363 mm |
| Housing Diameter | 18 mm |
| Mounting points diameter | 18 mm |
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.12
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023