Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1655 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PTFE (polytetrafluoroethylene) |
| Function | Shaft Seal, crankshaft |
| Inner diameter | 35 mm |
| Outer diameter | 136 mm |
| Placement on Vehicle | frontal sided |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter 1 | 170 mm |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| for OE number | 942 350 39 35 S1 |
| Bearing Type | Rolling Bearing |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Ring, wheel hub (22842)
- 1x Febi Sensor Ring, ABS (18612)
Important compatibility info
| Length | 1366 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 146 mm |
| Inner diameter | 96 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Hub (106992)
- 1x Febi Wheel Bearing (100733)
- 1x Febi Sensor Ring, ABS (49172)
- 1x Febi Circlip (106971)
- 1x Febi Thrust Washer, external planetary gearbox (107319)
- 1x Febi Washer (107318)
Important compatibility info
| Heating / Cooling | without vent hole |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| for OE number | 51.06402.0098 |
| Opening Temperature | 58 °C |
| Outer diameter | 24.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 84 °C |
| Outer diameter | 61.1 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 42 mm |
| Thickness | 42 mm |
| Thread Length | 17 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Buffer Design | A |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Diameter | 44.5 mm |
| Stroke | 41 mm |
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
| Housing length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 8 |
| Length | 1920 mm |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Deflection Rollers | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
Important compatibility info
| Function | V-Ribbed Belt Set |
| Length 1 | 1512 mm |
| Number of ribs 2 | 8 |
| Type | V-Ribbed Belt Set |
| Additional Information | with clamping elements |
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
| Length 2 | 1538 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29063)
- 1x Febi V-Ribbed Belt (40706)
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Belt Tensioner, v-ribbed belt (27117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
Important compatibility info
| Clamping range to | 160 mm |
| Width | 25 mm |
| Pipe Connector | Clamping Clip |
| Type | Pipe Connector, exhaust system |
| Function | Pipe Connector, exhaust system |
| Clamping range from | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 36877 |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Cone Size | 20 mm |
| Mounting points diameter | 17.4 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Wheel Bearing Kit |
| Inner diameter | 33 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter | 89 mm |
| Width | 58 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 13.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Paired article numbers | 188128 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| External Thread Size | M12 x 1,25 |
| Cone Size 2 | 18.4 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 123.1 mm |
| Width | 59.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16549 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 64 |
| Timing Chain Size | G53HP, G53HR |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Expansion Valve, air conditioning |
| Function | Expansion Valve, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 140 mm |
| Placement on Vehicle | Left |
| Width | 138 mm |
| Material | Rubber/Metal, Aluminium |
| Thickness | 151 mm |
| Paired article numbers | 36683 |
| Bearing/Mounting Type | Hydro Mount |
| Colour Coding | green |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















