Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14759 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23097)
- 2x Febi Bolt, control arm (15427)
- 2x Febi Nut (15428)
- 1x Febi Nut (23103)
- 1x Febi Bolt, control arm (23101)
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 40 mm |
| Outer diameter | 239.7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Number of mounting bores | 1 |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Drum |
| Max.skimmed drum measure | 201.5 mm |
| Thickness | 54 mm |
| Type | Brake Drum |
| Inner diameter | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Metal |
| Pulleys | with belt pulley |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1,5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 311 mm |
| Spanner Size | 32 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25, M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 285 mm |
| Paired article numbers | 28672 |
| Rod/Strut | Coupling Rod |
| Thread Length | 26.7 mm |
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 83 mm |
| Outer diameter | 136.7 mm |
| Inner diameter | 28 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 102 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with retaining rings |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 45 mm |
| Outer diameter | 74 mm |
| Inner diameter | 37 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04529)
- 1x Febi Circlip (04853)
- 1x Febi Cover Plate, dust-cover wheel bearing (01974)
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Surface | Coated |
| Number of mounting bores | 1 |
| Thickness | 55 mm |
| Brake Disc Thickness | 14 mm |
| Minimum thickness | 12.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Brake Disc |
| Centering Diameter | 67.1 mm |
| Outer diameter | 331 mm |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 65 mm |
| Outer diameter | 120 mm |
| Inner diameter | 28 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (22556)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Nut (24230)
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Diameter 1 | 42 mm |
| for OE number | 103 094 10 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 20.6 mm |
| Mounting points diameter | 12.1 mm |
| Function | Ball Joint |
| External Thread Size | M18 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2160 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 60 mm |
| Colour | Black |
| Width | 64 mm |
| Length | 92 mm |
| Shape/Form | rectangular |
| Extra Description | febi Plus |
| Function | Lift Point Pad, jack |
| Material | Plastic |
| Type | Lift Point Pad, jack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 334 mm |
| Outer diameter | 132 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Left, Lower Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 38 mm |
| Inner diameter | 30 mm |
| Inner diameter 1 | 31 mm |
| Outer diameter 1 | 39 mm |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cooling Hose | Turbocharger to Engine |
| Function | Radiator Hose |
| Material | Plastic, Rubber |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 25.5 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thickness | 65 mm |
| Outer diameter | 10 mm |
| Material | Steel |
| Length | 320 mm |
| External Thread Size | M10 x 1,5 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 144 mm |
| Thickness | 44.5 mm |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 30 mm |
| Number of Ribs | 6 |
| Parameter | 4PK + 4PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Separator, fuel system |
| Type | Water Separator, fuel system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 96 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 55495936 S1 |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (106641)
- 1x Febi Tensioner, timing chain (106688)
- 1x Febi Guide, timing chain (106644)
- 1x Febi Guide, timing chain (106642)
- 1x Febi Guide, timing chain (106709)
Important compatibility info
| Length | 97 mm |
| Height | 89 mm |
| Width | 107 mm |
| Voltage | 24 V |
| Frequency Range | 420 Hz |
| Operating Mode | Electric |
| Noise Level | 109 dB |
| Signal | Low Tone |
| Type | Signal Horn |
| Function | Signal Horn |
| Power Consumption | 100 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 31480565 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 68 mm. 75 mm |
| Inner diameter | 40 mm. 45 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width | 19 mm. 20 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, inner |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173054)
- 1x Febi Wheel Bearing (173055)
- 1x Febi Shaft Seal, wheel bearing (173944)
Important compatibility info
| Placement on Vehicle | Left |
| Type | Mounting, transfer case |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, transfer case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 176816 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 1677 mm |
| Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Connectors / Ports | 4 |
| Operating Mode | electromagnetic |
| Additional Information 2 | with bolts/screws |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fitting Depth | 27.5 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M8 x 1 |
| Length | 120 mm |
| Spanner Size | 8 |
| Voltage | 11 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 141 mm |
| Additional Information 2 | without wheel bearing |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Width | 91 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 336 mm |
| Additional Information | with fastening/mounting material |
| Paired article numbers | 185472 |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Length | 1190 mm |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184952)
- 1x Febi Belt Tensioner, v-ribbed belt (183536)
Important compatibility info
| Length | 970 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193402 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Connector Shape | angled |
| Version | 4+3-pol. MCP1,5/2,8 |
| Port / Connector type | HDSCS |
| Number of Connectors / Ports | 7 |
| Type | Plug |
| Function | Plug |
| Paired article numbers | 198884 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | without wheel bearing |
| Width | 81 mm |
| Outer diameter | 70 mm |
| Inner diameter | 29 mm |
| Number of mounting bores | 5 |
| Outer diameter 1 | 137 mm |
| Type | Wheel Hub |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 195008 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| for OE number | 11 11 8 571 141 |
| Type | Coolant Flange |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Length | 84 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 13.3 mm |
| Function | Tie Rod End |
| Thickness | 70 mm |
| Spanner Size | 17 |
| Length | 96 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 101 mm |
| Material | Rubber |
| Inner diameter 1 | 34 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 494 mm |
| Height | 57 mm |
| Width | 84 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 194 mm |
| Outer diameter | 96 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Internal Thread Size | 3/4" - 16 UNF |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 160 mm |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101771)
- 8x Febi Screw (21197)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 148.4 mm |
| Width | 72.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 80 mm |
| Inner diameter 1 | 23 mm |
| Joint Type | Tripod Joint |
| Material | Thermoplastic polyester elastomer |
| Length | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180201)
- 1x Febi Molybdenum Grease (02582)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































