Categories
Important compatibility info
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Extra Description | FleetRunner™ Micro-V® |
Additional Information
- 1x Gates V-Ribbed Belt (8PK1385HD)
- 1x Gates Belt Tensioner, v-ribbed belt (T38726)
Important compatibility info
| Length | 242 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles with start-stop function |
| Ampere-Hours | 60 Ah |
| Cold-test Current, EN | 680 A |
| Battery | AGM Battery |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | NAPA Battery |
| Title | AGM Start Stop Plus Battery 12V - 60Ah - 680A |
| Hold-down Type | B13 |
| Terminal Type | T1 |
| Battery Type Code | 027 AGM |
Additional Information
- AGM (Absorbent Glass Mat) Start-Stop Technology - Absorbed Glass Mat is manufactured specifically for Micro-Hybrid vehicles fitted with the Start-Stop, Brake Energy Regeneration and other technologies designed to reduce fuel consumption.
- OE Equivalent - Original Quality Spare Part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom the
- 5-8% CO₂ & Fuel Saving - With enhanced technologies to reduce the CO₂ levels & to encourage fuel savings of 5-8%.
- Superior Cyclic Performance → 360,000+ Start-Stop Cycles - Not only can these batteries cope with increased demand from fuel saving devices on the vehicle, they are also able to power a wider range of in car equipment when the engine is idle.
- For ALL Micro-Hybrid Start-Stop Vehicles - This battery is suitable for ALL vehicles with the Micro Hybrid Start-Stop Feature.
- Required for Brake Energy Regeneration (BER) systems - For every vehicle that has the Brake Energy Regeneration designed to help reduce fuel consumption, they must be fitted with an AGM battery.
- WARNING - REPLACE AGM WITH AGM TECHNOLOGY ONLY - You must replace an AGM battery with another AGM battery only.
Important compatibility info
| Length | 242 mm |
| Height | 190 mm |
| Width | 175 mm |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles with start-stop function |
| Ampere-Hours | 60 Ah |
| Cold-test Current, EN | 680 A |
| Battery | AGM Battery |
| Type | Starter Battery |
| Function | Starter Battery |
| Extra Description | NAPA Battery |
| Title | AGM Start Stop Plus Battery 12V - 60Ah - 680A |
| Hold-down Type | B13 |
| Terminal Type | T1 |
| Battery Type Code | 027 AGM |
Additional Information
- AGM (Absorbent Glass Mat) Start-Stop Technology - Absorbed Glass Mat is manufactured specifically for Micro-Hybrid vehicles fitted with the Start-Stop, Brake Energy Regeneration and other technologies designed to reduce fuel consumption.
- OE Equivalent - Original Quality Spare Part – Produced on the same production lines that make batteries for Original Equipment, using the same technology, man power, equipment, controls and quality inspections approved by the car manufacturers to whom the
- 5-8% CO₂ & Fuel Saving - With enhanced technologies to reduce the CO₂ levels & to encourage fuel savings of 5-8%.
- Superior Cyclic Performance → 360,000+ Start-Stop Cycles - Not only can these batteries cope with increased demand from fuel saving devices on the vehicle, they are also able to power a wider range of in car equipment when the engine is idle.
- For ALL Micro-Hybrid Start-Stop Vehicles - This battery is suitable for ALL vehicles with the Micro Hybrid Start-Stop Feature.
- Required for Brake Energy Regeneration (BER) systems - For every vehicle that has the Brake Energy Regeneration designed to help reduce fuel consumption, they must be fitted with an AGM battery.
- WARNING - REPLACE AGM WITH AGM TECHNOLOGY ONLY - You must replace an AGM battery with another AGM battery only.
Important compatibility info
| Cooling Type | Water-cooled |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Important compatibility info
| Cooling Type | Water-cooled |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 307 mm |
| Rotor Style | Solid |
| Fulfils ECE norm | ECE-R90 |
| Height | 63.7 mm |
| Centering Diameter | 62.01 mm |
| Function | Brake Disc |
| Minimum thickness | 10.5 mm |
| Number of Holes | 5 |
| Surface | Oiled |
| Bolt Hole Circle Diameter | 114.3 mm |
| Drill Diameter, up to | 14.8 mm |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 12 mm |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 307 mm |
| Rotor Style | Solid |
| Fulfils ECE norm | ECE-R90 |
| Height | 63.7 mm |
| Centering Diameter | 62.01 mm |
| Function | Brake Disc |
| Minimum thickness | 10.5 mm |
| Number of Holes | 5 |
| Surface | Oiled |
| Bolt Hole Circle Diameter | 114.3 mm |
| Drill Diameter, up to | 14.8 mm |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 12 mm |
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 619 mm |
| Core Width | 410 mm |
| Core Depth | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 619 mm |
| Core Width | 410 mm |
| Core Depth | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1035 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1322 mm |
| Outer length 2 | 1229 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1035 mm |
| Inner length 2 | 955 mm |
| Outer length 1 | 1322 mm |
| Outer length 2 | 1229 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 617 mm |
| Min. Length | 377 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 617 mm |
| Min. Length | 377 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Type | Brake Disc Rotor |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 67 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Height | 63.6 mm |
| Outer diameter | 330 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Net weight | 8.2 kg |
Important compatibility info
| Type | Brake Disc Rotor |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 67 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Height | 63.6 mm |
| Outer diameter | 330 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Net weight | 8.2 kg |
Important compatibility info
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Material | Aluminium |
| Extra Description | EASY FIT |
| Core Length | 559 mm |
| Core Width | 445 mm |
| Core Depth | 26 mm |
| Type | Radiator, engine cooling |
| Additional Information 2 | with mounting parts |
Important compatibility info
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Material | Aluminium |
| Extra Description | EASY FIT |
| Core Length | 559 mm |
| Core Width | 445 mm |
| Core Depth | 26 mm |
| Type | Radiator, engine cooling |
| Additional Information 2 | with mounting parts |
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB491)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT291)
- 2x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT298)
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB491)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT291)
- 2x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT298)
Important compatibility info
| for flywheel depth | 21.6 mm |
| Number of Teeth | 14 |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 200 mm |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
| Replaces | QKT2796AF |
| Hub Profile | 15.8x18.8 |
Additional Information
- 1x Quinton Hazell Central Slave Cylinder, clutch (CSC003)
Important compatibility info
| for flywheel depth | 21.6 mm |
| Number of Teeth | 14 |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 200 mm |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
| Replaces | QKT2796AF |
| Hub Profile | 15.8x18.8 |
Additional Information
- 1x Quinton Hazell Central Slave Cylinder, clutch (CSC003)
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Belt Width | 25.4 mm |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
- 1x SKF Water Pump, engine cooling (VKPC83207)
- 1x SKF Timing Belt Kit (VKMA03205)
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Belt Width | 25.4 mm |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
- 1x SKF Water Pump, engine cooling (VKPC83207)
- 1x SKF Timing Belt Kit (VKMA03205)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Bulb Type | LED |
| Section | Inner Section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Bulb Type | LED |
| Section | Inner Section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | FCA6220 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6131)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6132)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | FCA6220 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6131)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6132)
Important compatibility info
| Operating Mode | Electric |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
| Placement on Vehicle | in the fuel tank |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















