Categories
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 81 mm |
| Width | 136 mm |
| Additional Information | with accessories |
| Thickness | 16 mm |
| Additional Information 2 | with piston clip, with anti-squeak plate |
| Brake System | Brembo |
| Wear Warning Contact | prepared for wear warning indicator |
| WVA Number | 26196, 26197 |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Extra Description | PRIME LINE |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Length | 310 mm |
| Height | 80 mm |
| Width | 265 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC3891 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Length | 310 mm |
| Height | 80 mm |
| Width | 265 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC3891 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Additional Information 2 | without resistor |
| Function | Interior Blower |
| Type | Interior Blower |
| Rotation Direction | Clockwise rotation |
| Voltage | 12 V |
| Driver Position | for left-hand drive vehicles |
| Weight | 1263 g |
| for OE number | 701819167 |
| Gross Weight | 1513 g |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Additional Information 2 | without resistor |
| Function | Interior Blower |
| Type | Interior Blower |
| Rotation Direction | Clockwise rotation |
| Voltage | 12 V |
| Driver Position | for left-hand drive vehicles |
| Weight | 1263 g |
| for OE number | 701819167 |
| Gross Weight | 1513 g |
Important compatibility info
| Height | 92.6 mm |
| Width | 210.9 mm |
| Additional Information | with accessories |
| Thickness | 30 mm |
| Brake System | Knorr SN6 |
| Wear Warning Contact | prepared for wear indicator |
| WVA Number | 29306 |
| Quality | DON 8750 |
| Packaging height | 7.2 cm |
| Packaging length | 25.6 cm |
| Packaging width | 19.3 cm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Important compatibility info
| Height | 92.6 mm |
| Width | 210.9 mm |
| Additional Information | with accessories |
| Thickness | 30 mm |
| Brake System | Knorr SN6 |
| Wear Warning Contact | prepared for wear indicator |
| WVA Number | 29306 |
| Quality | DON 8750 |
| Packaging height | 7.2 cm |
| Packaging length | 25.6 cm |
| Packaging width | 19.3 cm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Paired article numbers | 334370 |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Paired article numbers | 334370 |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Extra Description | Excel-G |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Paired article numbers | 3358002 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Extra Description | Excel-G |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut, Damper with Rebound Spring |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Paired article numbers | 3358002 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Spring Design | Coil Spring |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Extra Description | K-Flex |
| Type | Suspension Spring |
Important compatibility info
| Spring Design | Coil Spring |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Extra Description | K-Flex |
| Type | Suspension Spring |
Important compatibility info
| Alternator Charge Current | 40 A |
| Pulleys | for v-belt pulley |
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Function | Alternator |
| Manufacturer Restriction | Denso |
| Type | Alternator |
| Belt Pulley Diameter | 60 mm |
| Number of Ribs | 1 |
Important compatibility info
| Alternator Charge Current | 40 A |
| Pulleys | for v-belt pulley |
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Function | Alternator |
| Manufacturer Restriction | Denso |
| Type | Alternator |
| Belt Pulley Diameter | 60 mm |
| Number of Ribs | 1 |
Important compatibility info
| External Teeth, Wheel Side | 23 |
| Length | 675 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| External Teeth, Wheel Side | 23 |
| Length | 675 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Material | Aluminium |
| Thread Size | 10 X 1 (2) |
| Brake System | ATE |
| Bore Diameter | 24 mm |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
Important compatibility info
| Material | Aluminium |
| Thread Size | 10 X 1 (2) |
| Brake System | ATE |
| Bore Diameter | 24 mm |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Function | Starter |
| Rated Power | 1.8 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
| Number of Thread Bores | 2 |
| Manufacturer Restriction | Bosch |
| Type | Starter |
Important compatibility info
| Function | Starter |
| Rated Power | 1.8 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
| Number of Thread Bores | 2 |
| Manufacturer Restriction | Bosch |
| Type | Starter |
Important compatibility info
| Number of Thread Bores | 2 |
| Function | Starter |
| Manufacturer Restriction | Mitsubishi |
| Rated Power | 1.2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 8 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
| Type | Starter |
Important compatibility info
| Number of Thread Bores | 2 |
| Function | Starter |
| Manufacturer Restriction | Mitsubishi |
| Rated Power | 1.2 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 8 |
| Voltage | 12 V |
| Number of mounting bores | 2 |
| Type | Starter |
Important compatibility info
| Number of Teeth | 11 |
| Number of mounting bores | 2 |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 1.2 kW |
Important compatibility info
| Number of Teeth | 11 |
| Number of mounting bores | 2 |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 1.2 kW |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.1 kW |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.1 kW |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Function | Starter |
Important compatibility info
| for OE number | 8200188889 |
| Width | 42 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 154 mm |
| Additional Information 2 | with damping |
| Inner diameter | 33 mm |
| Number of Ribs | 6 |
| Number of grooves | 7 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Important compatibility info
| for OE number | 8200188889 |
| Width | 42 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 154 mm |
| Additional Information 2 | with damping |
| Inner diameter | 33 mm |
| Number of Ribs | 6 |
| Number of grooves | 7 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Important compatibility info
| for OE number | 214813773R |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Heating / Cooling | Single Fan |
| Additional Information 2 | with radiator fan shroud |
Important compatibility info
| for OE number | 214813773R |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Heating / Cooling | Single Fan |
| Additional Information 2 | with radiator fan shroud |
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Delivery Quantity | 1 l/h |
| Pressure | 3.5 bar |
| Voltage | 13.5 V |
| Type | Fuel Feed Unit |
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Delivery Quantity | 1 l/h |
| Pressure | 3.5 bar |
| Voltage | 13.5 V |
| Type | Fuel Feed Unit |
Important compatibility info
| Height | 616 mm |
| Outer diameter | 324 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 212 mm |
| Outer diameter 1 | 348 mm |
| Type | Air Filter |
| Function | Air Filter |
Important compatibility info
| Height | 616 mm |
| Outer diameter | 324 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 212 mm |
| Outer diameter 1 | 348 mm |
| Type | Air Filter |
| Function | Air Filter |
Important compatibility info
| Filled Weight | 15.5 kg |
| Width | 175 mm |
| Battery Type Code | 005L |
| Hold-down Type | B00 |
| Type | Starter Battery |
| Extra Description | YBX3000 SMF Batteries |
| Cold Cranking Amperage (CCA) | 500 A |
| Suitable for (starter battery) | with central degassing |
| Voltage | 12 V |
| Function | Starter Battery |
| Height | 225 mm |
| Terminal Layout | Positive Front Right |
| Battery | with handles, with load status display |
| Cold-test Current, EN | 500 A |
| Ampere-Hours | 60 Ah |
| Port / Connector type | T1 |
| Length | 232 mm |
| Key Words | 500A; 60Ah; 3Yr Warranty; 232x175x225 |
| Warranty | 3 year warranty |
Important compatibility info
| Filled Weight | 15.5 kg |
| Width | 175 mm |
| Battery Type Code | 005L |
| Hold-down Type | B00 |
| Type | Starter Battery |
| Extra Description | YBX3000 SMF Batteries |
| Cold Cranking Amperage (CCA) | 500 A |
| Suitable for (starter battery) | with central degassing |
| Voltage | 12 V |
| Function | Starter Battery |
| Height | 225 mm |
| Terminal Layout | Positive Front Right |
| Battery | with handles, with load status display |
| Cold-test Current, EN | 500 A |
| Ampere-Hours | 60 Ah |
| Port / Connector type | T1 |
| Length | 232 mm |
| Key Words | 500A; 60Ah; 3Yr Warranty; 232x175x225 |
| Warranty | 3 year warranty |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | without bulb holder |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Bulb Type | LED |
| Section | Outer section |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Important compatibility info
| Number of Holes | 5 |
| Quantity | 1 |
| Type | Brake Disc Rotor |
| Height | 46.5 mm |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 345 mm |
| Function | Brake Disc |
| Centering Diameter | 67 mm |
| Minimum thickness | 28.0 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Number of Holes | 5 |
| Quantity | 1 |
| Type | Brake Disc Rotor |
| Height | 46.5 mm |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 345 mm |
| Function | Brake Disc |
| Centering Diameter | 67 mm |
| Minimum thickness | 28.0 mm |
| Rotor Style | Vented |
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 23 |
| Length | 596 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1248)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 23 |
| Length | 596 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1248)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 39 mm |
| Additional Information | with accessories, with wheel brake cylinder |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Brake Pad | with lining |
| Inner Brake Drum Diameter | 203.2 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Extra Description | KIT SUPERPRO |
| Piston Diameter | 19.05 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























