Categories
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 202.52 mm |
| Thickness/Strength 1 | 6.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 202.52 mm |
| Thickness/Strength 1 | 6.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bracket |
| Technical Information Number | WITH WIRING TUBE |
| Length 1 | 545 mm |
| Cable Length | 450 mm. 500 mm. 600 mm. 700 mm. 800 mm. 870 mm |
| Ignition Coil | Connector Type M4 |
| Distributor/ Rotor | Connector Type M4 |
| for pipe diameter | 7 mm |
| Ignition Cable | Connector Type M4, Copper Ignition Cable |
| Type | Ignition Cable Kit |
| Function | Ignition Cable Kit |
| Extra Description | HighVolt |
Important compatibility info
| Additional Information 2 | with bracket |
| Technical Information Number | WITH WIRING TUBE |
| Length 1 | 545 mm |
| Cable Length | 450 mm. 500 mm. 600 mm. 700 mm. 800 mm. 870 mm |
| Ignition Coil | Connector Type M4 |
| Distributor/ Rotor | Connector Type M4 |
| for pipe diameter | 7 mm |
| Ignition Cable | Connector Type M4, Copper Ignition Cable |
| Type | Ignition Cable Kit |
| Function | Ignition Cable Kit |
| Extra Description | HighVolt |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type M4, Copper Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type M4 |
| Ignition Coil | Connector Type M4 |
| Cable Length | 410 mm. 450 mm. 600 mm. 700 mm. 810 mm. 870 mm |
| Quantity | 7 |
| Length 1 | 550 mm |
| Technical Information Number | WITH WIRING TUBE |
| Additional Information 2 | with clip |
| Net weight | 0.824 kg |
| Type | Ignition Cable Kit |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type M4, Copper Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type M4 |
| Ignition Coil | Connector Type M4 |
| Cable Length | 410 mm. 450 mm. 600 mm. 700 mm. 810 mm. 870 mm |
| Quantity | 7 |
| Length 1 | 550 mm |
| Technical Information Number | WITH WIRING TUBE |
| Additional Information 2 | with clip |
| Net weight | 0.824 kg |
| Type | Ignition Cable Kit |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 10 |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 10 |
Important compatibility info
| Overall Length | 1230 mm |
| Recommended Replace Interval | 160000 km |
| Function | Oxygen Sensor |
| Number of circuits | 5 |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Overall Length | 1230 mm |
| Recommended Replace Interval | 160000 km |
| Function | Oxygen Sensor |
| Number of circuits | 5 |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Centering Diameter | 67 mm |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 280 mm |
| Machining | High-carbon |
| Minimum thickness | 22.4 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Height | 51 mm |
| Function | Brake Disc |
| Tightening Torque | 130 Nm |
| Rotor Style | internally vented |
| Extra Description | PRIME LINE - UV Coated |
| Number of Holes | 5 |
| Brake Disc Thickness | 25 mm |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
Important compatibility info
| Centering Diameter | 67 mm |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 280 mm |
| Machining | High-carbon |
| Minimum thickness | 22.4 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Height | 51 mm |
| Function | Brake Disc |
| Tightening Torque | 130 Nm |
| Rotor Style | internally vented |
| Extra Description | PRIME LINE - UV Coated |
| Number of Holes | 5 |
| Brake Disc Thickness | 25 mm |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
Important compatibility info
| Air & Fuel Sensor Type | Air Flow Mass Meter |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| for OE number | 22204-21010 |
| Quality | OE |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Gross Weight | 79 g |
| alternative item | - |
Important compatibility info
| Air & Fuel Sensor Type | Air Flow Mass Meter |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| for OE number | 22204-21010 |
| Quality | OE |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Gross Weight | 79 g |
| alternative item | - |
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5427XS)
- 1x Gates Tensioner Pulley, timing belt (T43046)
- 1x Gates Water Pump, engine cooling (WP0030)
- 1x Gates Bolt and Nut Kit (SET12)
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5427XS)
- 1x Gates Tensioner Pulley, timing belt (T43046)
- 1x Gates Water Pump, engine cooling (WP0030)
- 1x Gates Bolt and Nut Kit (SET12)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 69.9 mm |
| Outer diameter | 302 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 24.5 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Net weight | 9.26 kg |
| Rotor Style | Vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 69.9 mm |
| Outer diameter | 302 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 24.5 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Net weight | 9.26 kg |
| Rotor Style | Vented |
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB573)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1083)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT333)
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB573)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1083)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT333)
Important compatibility info
| Cone Size | 15.4 mm |
| Paired article numbers | QSA2923S |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
| Cone Size | 15.4 mm |
| Paired article numbers | QSA2923S |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
| Cone Size | 15.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | QSA2922S |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Cone Size | 15.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | QSA2922S |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Function | Clutch Kit |
| Hub Profile | 21,8 x 18,2 |
| Number of Teeth | 18 |
| Weight | 5.03 kg |
| Extra Description | KIT3P |
| Type | Clutch Kit |
| External diameter, clutch pressure plate | 200 mm |
| Replaces | 826372; 826717; 828115; 828119; 828450 |
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Function | Clutch Kit |
| Hub Profile | 21,8 x 18,2 |
| Number of Teeth | 18 |
| Weight | 5.03 kg |
| Extra Description | KIT3P |
| Type | Clutch Kit |
| External diameter, clutch pressure plate | 200 mm |
| Replaces | 826372; 826717; 828115; 828119; 828450 |
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 336 mm |
| Height | 51 mm |
| Rotor Style | Vented |
| Extra Description | Apec Blue |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















