Categories
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | QSA2988S |
| Steering arm type | Control Arm |
| Additional Information 2 | with rubber mount, without ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | QSA2988S |
| Steering arm type | Control Arm |
| Additional Information 2 | with rubber mount, without ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Number of Chain Links | 116 |
| Chain Type | Simplex |
| Function | Timing Chain Kit |
| Additional Information | with gears |
| Type | Timing Chain Kit |
Important compatibility info
| Number of Chain Links | 116 |
| Chain Type | Simplex |
| Function | Timing Chain Kit |
| Additional Information | with gears |
| Type | Timing Chain Kit |
Important compatibility info
| Glow Plug Type | Pencil-type Glow Plug, after-glow capable |
| Function | Glow Plug |
| Length | 97 mm |
| Extra Description | Duraterm |
| Type | Glow Plug |
| Thread Size | M 10 x 1 |
| Voltage | 11 V |
| Spanner Size | 10 |
| Port / Connector type | PIN |
| Fitting Depth | 30 mm |
| Cone Pitch | 63 |
| Tightening torque to | 15 Nm |
| Tightening torque from | 0 Nm |
Important compatibility info
| Glow Plug Type | Pencil-type Glow Plug, after-glow capable |
| Function | Glow Plug |
| Length | 97 mm |
| Extra Description | Duraterm |
| Type | Glow Plug |
| Thread Size | M 10 x 1 |
| Voltage | 11 V |
| Spanner Size | 10 |
| Port / Connector type | PIN |
| Fitting Depth | 30 mm |
| Cone Pitch | 63 |
| Tightening torque to | 15 Nm |
| Tightening torque from | 0 Nm |
Important compatibility info
| Replaces | 0258017112 |
| Overall Length | 710 mm |
| Recommended Replace Interval | 250000 km |
| Function | Oxygen Sensor |
| Number of circuits | 5 |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Replaces | 0258017112 |
| Overall Length | 710 mm |
| Recommended Replace Interval | 250000 km |
| Function | Oxygen Sensor |
| Number of circuits | 5 |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Important compatibility info
| Outer diameter | 160 mm |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101771)
- 8x Febi Screw (21197)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
Important compatibility info
| Outer diameter | 160 mm |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101771)
- 8x Febi Screw (21197)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
Important compatibility info
| Number of circuits | 5 |
| Overall Length | 380 mm |
| Recommended Replace Interval | 250000 km |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Important compatibility info
| Number of circuits | 5 |
| Overall Length | 380 mm |
| Recommended Replace Interval | 250000 km |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Important compatibility info
| Operating Mode | Pneumatic |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Pneumatic |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 84 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| External Teeth, Diff.Side | 40 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 84 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| External Teeth, Diff.Side | 40 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| for OE number | 2 225 899 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 830 mm |
| Inner length 2 | 865 mm |
| Outer length 1 | 1201 mm |
| Outer length 2 | 1227 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| for OE number | 2 225 899 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 830 mm |
| Inner length 2 | 865 mm |
| Outer length 1 | 1201 mm |
| Outer length 2 | 1227 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 8 |
| Bore Diameter | 10.5 mm |
| Centering Diameter | 84 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Minimum thickness | 19.0 mm |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 289 mm |
| Height | 85 mm |
| Rotor Style | Solid |
| Paired article numbers | JBS1068, JBS1126, JCK527, JCP1102, JCW119, NKR0201, NKR0207 |
| Weight | 9.6 kg |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 8 |
| Bore Diameter | 10.5 mm |
| Centering Diameter | 84 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Minimum thickness | 19.0 mm |
| Brake Disc Thickness | 22 mm |
| Outer diameter | 289 mm |
| Height | 85 mm |
| Rotor Style | Solid |
| Paired article numbers | JBS1068, JBS1126, JCK527, JCP1102, JCW119, NKR0201, NKR0207 |
| Weight | 9.6 kg |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Length | 850 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Length | 850 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 14 mm |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Brake Caliper Type | Fist-type Caliper |
| Piston Diameter | 41 mm |
| Replaces | BC8159R |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| for brake disc thickness | 14 mm |
| Brake Disc Type | Solid |
| Brake System | TRW |
| Brake Caliper Type | Fist-type Caliper |
| Piston Diameter | 41 mm |
| Replaces | BC8159R |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Brake System | AISIN |
| Brake Disc Type | Vented |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 25 mm |
| Inner width | 63 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston Diameter | 57 mm |
| Replaces | BC2240 |
Important compatibility info
| Brake System | AISIN |
| Brake Disc Type | Vented |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 25 mm |
| Inner width | 63 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston Diameter | 57 mm |
| Replaces | BC2240 |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake Disc Type | Vented |
| Brake System | AISIN |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 25 mm |
| Inner width | 63 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston Diameter | 57 mm |
| Replaces | BC2240R |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake Disc Type | Vented |
| Brake System | AISIN |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 25 mm |
| Inner width | 63 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston Diameter | 57 mm |
| Replaces | BC2240R |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023













