Proud to be a UK-based company
Contact us
Categories
Important compatibility info
| Diameter | 190 mm |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (119012610)
- 1x LuK Clutch Disc (319017210)
- 1x LuK Clutch Release Bearing (500118710)
£85.36
Important compatibility info
| Title | 7 Core Cable - 9/0.3 |
Additional Information
Whether you are installing electronic equipment or replacing cabling in your vehicle, Pearls 30m roll of Black 9/0.3mm 7 core trailer cable is perfect for the job. Featuring a seven core copper cable with black cable insulation, the cable is able to support 12v and 10 amps of automotive current. This cable comes in an easy to store roll; which will mean you can always easily use more of the cable when you next require.
Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- 100% Copper inner cable
- 10 Amp
- 12V cable for automotive use
- 30m roll of black twin speaker cable
- Seven Core Cable
£85.36
Important compatibility info
| Diameter | 200 mm |
| Type | Clutch Kit |
| Number of Teeth | 14 |
| Replaces | 3000859901; 3000951071 |
| Function | Clutch Kit |
| Additional Information 2 | without clutch release bearing |
Additional Information
- 1x Sachs Clutch Pressure Plate (3082297531)
- 1x Sachs Grease (4200080060)
£85.36
Important compatibility info
| Diameter | 200 mm |
| Type | Clutch Kit |
| Number of Teeth | 14 |
| Replaces | 3000859901; 3000951071 |
| Function | Clutch Kit |
| Additional Information 2 | without clutch release bearing |
Additional Information
- 1x Sachs Clutch Pressure Plate (3082297531)
- 1x Sachs Grease (4200080060)
£85.36
Important compatibility info
| Diameter | 100 mm |
| External Teeth, Wheel Side | 27 |
| Seal Diameter | 63 mm |
| Internal Teeth, wheel side | 36 |
| Length 2 | 90 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Length | 160 mm |
| Additional Information | with retaining ring rear side |
| Placement on Vehicle | Front Axle, Wheel Side |
£85.36
Important compatibility info
| Diameter | 100 mm |
| External Teeth, Wheel Side | 27 |
| Seal Diameter | 63 mm |
| Internal Teeth, wheel side | 36 |
| Length 2 | 90 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Length | 160 mm |
| Additional Information | with retaining ring rear side |
| Placement on Vehicle | Front Axle, Wheel Side |
£85.36
Important compatibility info
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Sheet Steel |
| Operating Mode | Vacuum-controlled |
| Water Pump Type | for V-ribbed belt use |
£85.36
Important compatibility info
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Sheet Steel |
| Operating Mode | Vacuum-controlled |
| Water Pump Type | for V-ribbed belt use |
£85.36
Important compatibility info
| Placement on Vehicle | Right |
| Bulb Type | LED |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Section | Outer section |
£85.37
Important compatibility info
| Placement on Vehicle | Right |
| Bulb Type | LED |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Section | Outer section |
£85.37
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 28.4 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 45 mm |
| Outer diameter | 335 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.37
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 28.4 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 45 mm |
| Outer diameter | 335 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.37
Important compatibility info
| Outer diameter | 315 mm |
| Thickness | 50 mm |
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 114 mm |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 62 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.37
Important compatibility info
| Outer diameter | 315 mm |
| Thickness | 50 mm |
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 114 mm |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 62 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.37
Important compatibility info
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Centre |
| To be used with part number(s) | FK90826 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
£85.37
Important compatibility info
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Centre |
| To be used with part number(s) | FK90826 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
£85.37
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
£85.37
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
£85.37
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
£85.37
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
£85.37
Important compatibility info
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 628 mm |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.37
Important compatibility info
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 628 mm |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.37
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | Excel-G |
| Type | Shock Absorber |
£85.37
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | Excel-G |
| Type | Shock Absorber |
£85.37
Important compatibility info
| Type | Starter |
| Number of mounting bores | 2 |
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 2 kW |
| Function | Starter |
| Number of Teeth | 11 |
| Flange Diameter | 76 mm |
£85.37
Important compatibility info
| Type | Starter |
| Number of mounting bores | 2 |
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 2 kW |
| Function | Starter |
| Number of Teeth | 11 |
| Flange Diameter | 76 mm |
£85.37
Important compatibility info
| Height | 302 mm |
| Outer diameter | 136 mm |
| Thread Size | M39x1.5 |
| Inner diameter 1 | 100 mm |
| Inner diameter 2 | 111 mm |
| Type | Filter, compressed-air technology |
| Function | Filter, compressed-air technology |
| Extra Description | StarBox |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
£85.38
Important compatibility info
| Height | 302 mm |
| Outer diameter | 136 mm |
| Thread Size | M39x1.5 |
| Inner diameter 1 | 100 mm |
| Inner diameter 2 | 111 mm |
| Type | Filter, compressed-air technology |
| Function | Filter, compressed-air technology |
| Extra Description | StarBox |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
£85.38
Important compatibility info
| Placement on Vehicle | Rear Axle Left, behind the axle |
| Material | Cast Iron |
| Brake Disc Type | Vented |
| Brake Caliper Type | Floating Caliper, Brake Caliper (1 piston) |
| Paired article numbers | 2115238 |
| for brake disc thickness | 20 mm |
| for brake disc diameter | 324 mm |
| Type | Brake Caliper |
| Manufacturer Restriction | ATE |
| Function | Brake Caliper |
| Net weight | 2.42 kg |
| Piston Diameter | 42 mm |
£85.38
Important compatibility info
| Placement on Vehicle | Rear Axle Left, behind the axle |
| Material | Cast Iron |
| Brake Disc Type | Vented |
| Brake Caliper Type | Floating Caliper, Brake Caliper (1 piston) |
| Paired article numbers | 2115238 |
| for brake disc thickness | 20 mm |
| for brake disc diameter | 324 mm |
| Type | Brake Caliper |
| Manufacturer Restriction | ATE |
| Function | Brake Caliper |
| Net weight | 2.42 kg |
| Piston Diameter | 42 mm |
£85.38
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023