Categories
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Bottom Plate, Top pin |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Net weight | 4.05 kg |
| Shock Absorber Type | Gas Pressure |
Important compatibility info
| Total Br. Drum Height | 76 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Brake Type | Brake Drum with Bearing |
| Br. Drum outer diameter | 203 mm |
| Inner Brake Drum Diameter | 51 mm |
| Type | Brake Drum |
| Function | Brake Drum |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Total Br. Drum Height | 76 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Brake Type | Brake Drum with Bearing |
| Br. Drum outer diameter | 203 mm |
| Inner Brake Drum Diameter | 51 mm |
| Type | Brake Drum |
| Function | Brake Drum |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Teeth | 104 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB437)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT309)
- 1x Quinton Hazell Water Pump, engine cooling (QCP3234)
Important compatibility info
| Number of Teeth | 104 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB437)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT309)
- 1x Quinton Hazell Water Pump, engine cooling (QCP3234)
Important compatibility info
| Number of Teeth | 18 |
| Hub Profile | 20,97 x 18,2 |
| Extra Description | KIT3P |
| Additional Information 2 | with clutch release bearing |
| External diameter, clutch pressure plate | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Weight | 3.86 kg |
| Replaces | 801376 |
Important compatibility info
| Number of Teeth | 18 |
| Hub Profile | 20,97 x 18,2 |
| Extra Description | KIT3P |
| Additional Information 2 | with clutch release bearing |
| External diameter, clutch pressure plate | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Weight | 3.86 kg |
| Replaces | 801376 |
Important compatibility info
| Brake Disc Type | Vented |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS8, BSC1 |
| Brake System | Aisin |
| Function | Brake Caliper |
| Model | CELICA COROLLA VERSO |
| Manufacturer | TOYOTA |
| for brake disc thickness | 25 mm |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Brake Disc Type | Vented |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Grey Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Part number of recommended accessories | BBS8, BSC1 |
| Brake System | Aisin |
| Function | Brake Caliper |
| Model | CELICA COROLLA VERSO |
| Manufacturer | TOYOTA |
| for brake disc thickness | 25 mm |
| Piston diameter 1 | 57 mm |
Important compatibility info
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90738 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90738 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Material | NBR (nitrile butadiene rubber), PVC |
| Inner diameter 1 | 76.5 mm |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Inner diameter 2 | 45.5 mm |
| Function | Intake Hose, air filter |
| Additional Information 2 | with sensor |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber), PVC |
| Inner diameter 1 | 76.5 mm |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Inner diameter 2 | 45.5 mm |
| Function | Intake Hose, air filter |
| Additional Information 2 | with sensor |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25371)
- 1x Febi Tensioner, timing chain (49496)
- 1x Febi Guide, timing chain (49504)
- 1x Febi Guide, timing chain (49503)
- 1x Febi Guide, timing chain (49499)
- 1x Febi Seal Ring (05552)
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25371)
- 1x Febi Tensioner, timing chain (49496)
- 1x Febi Guide, timing chain (49504)
- 1x Febi Guide, timing chain (49503)
- 1x Febi Guide, timing chain (49499)
- 1x Febi Seal Ring (05552)
Important compatibility info
| Net weight | 0.214 kg |
| Function | Idle Control Valve, air supply |
| Valve type | Auxiliary Air Valve |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.26 kg |
| Type | Idle Control Valve, air supply |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Net weight | 0.214 kg |
| Function | Idle Control Valve, air supply |
| Valve type | Auxiliary Air Valve |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Weight | 0.26 kg |
| Type | Idle Control Valve, air supply |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Manufacturer Restriction | Bosch |
| for OE number | 05033109AB |
| Weight | 0.218 kg |
| Net weight | 0.218 kg |
| Housing length | 95 mm |
| Function | Mass Air Flow Sensor |
| Housing Diameter | 80 mm |
| Housing Type | with housing |
| Connector Shape | Oval |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Type | Mass Air Flow Sensor |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Manufacturer Restriction | Bosch |
| for OE number | 05033109AB |
| Weight | 0.218 kg |
| Net weight | 0.218 kg |
| Housing length | 95 mm |
| Function | Mass Air Flow Sensor |
| Housing Diameter | 80 mm |
| Housing Type | with housing |
| Connector Shape | Oval |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Type | Mass Air Flow Sensor |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Housing Colour | Black |
| Connector Shape | rectangular |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Housing Colour | Black |
| Connector Shape | rectangular |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Material | Rubber, Aluminium |
| Operating Mode | Hydraulic |
| Colour | Silver |
| Function | Mounting, engine |
| Weight | 1.983 g |
| Placement on Vehicle | Right |
| Quality | OE Performance |
| Type | Mounting, engine |
Important compatibility info
| Material | Rubber, Aluminium |
| Operating Mode | Hydraulic |
| Colour | Silver |
| Function | Mounting, engine |
| Weight | 1.983 g |
| Placement on Vehicle | Right |
| Quality | OE Performance |
| Type | Mounting, engine |
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle, Upper, Rear |
| Length | 462 mm |
| Width | 58 mm |
| Material | Aluminium |
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle, Upper, Rear |
| Length | 462 mm |
| Width | 58 mm |
| Material | Aluminium |
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | ADBP860092 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | ADBP860092 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Radiator, engine cooling |
| Material | Aluminium |
| Weight | 3480 g |
| Frame Material | Plastic |
| Type | Radiator, engine cooling |
| for OE number | 51839665 |
| Core Depth | 16 mm |
| Core Width | 392 mm |
| Core Length | 480 mm |
| Gross Weight | 5160 g |
| alternative item | - |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















