Categories
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Length | 995 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Length | 995 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Operating Mode | Automatic |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Extra Description | febi Plus |
| Outer diameter | 74 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Operating Mode | Automatic |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Extra Description | febi Plus |
| Outer diameter | 74 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 16.7 mm |
| Centering Diameter | 75 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 28.4 mm |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 332 mm |
| Rotor Style | Vented |
| Paired article numbers | JCP997, JCW238, NKR0113, NKR0151 |
| Surface | Coated |
| Height | 62 mm |
| Weight | 12 kg |
| Type | Brake Disc Rotor |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Bore Diameter | 16.7 mm |
| Centering Diameter | 75 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 28.4 mm |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 332 mm |
| Rotor Style | Vented |
| Paired article numbers | JCP997, JCW238, NKR0113, NKR0151 |
| Surface | Coated |
| Height | 62 mm |
| Weight | 12 kg |
| Type | Brake Disc Rotor |
Important compatibility info
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber System | Twin-Tube |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 3330045 |
| Shock Absorber Type | Gas Pressure |
Important compatibility info
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Shock Absorber System | Twin-Tube |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 3330045 |
| Shock Absorber Type | Gas Pressure |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 9 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Manufacturer | SUZUKI |
| Model | SWIFT SX4 VITARA |
| Function | Brake Caliper |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Placement on Vehicle | behind the axle |
| Material | Aluminium |
| Brake Disc Type | Solid |
| Brake System | Tokico |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 9 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Manufacturer | SUZUKI |
| Model | SWIFT SX4 VITARA |
| Function | Brake Caliper |
| Piston diameter 1 | 34 mm |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Part number of recommended accessories | SMA0143 |
| Function | Shock Absorber |
| for OE number | 1092391 |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Part number of recommended accessories | SMA0143 |
| Function | Shock Absorber |
| for OE number | 1092391 |
Important compatibility info
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5491XS)
- 1x Gates Tensioner Pulley, timing belt (T43016)
- 1x Gates Vibration Damper, timing belt (T43025)
Important compatibility info
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5491XS)
- 1x Gates Tensioner Pulley, timing belt (T43016)
- 1x Gates Vibration Damper, timing belt (T43025)
Important compatibility info
| Width | 51 mm |
| Outer diameter | 96 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
| Inner diameter | 54 mm |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x SKF Assortment, fasteners (SKF02351)
- 1x SKF Service Book (SKF02873)
- 1x SKF Bearing (SKF01110)
Important compatibility info
| Width | 51 mm |
| Outer diameter | 96 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
| Inner diameter | 54 mm |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x SKF Assortment, fasteners (SKF02351)
- 1x SKF Service Book (SKF02873)
- 1x SKF Bearing (SKF01110)
Important compatibility info
| Flange Diameter | 139 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x SKF Bearing (SKF00721)
- 1x SKF Split Pin (SKF03254)
Important compatibility info
| Flange Diameter | 139 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x SKF Bearing (SKF00721)
- 1x SKF Split Pin (SKF03254)
Important compatibility info
| Inner diameter | 30.11 mm |
| Outer diameter | 77.95 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Flange Diameter | 139.71 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF00725)
- 1x SKF Nut (SKF04756)
Important compatibility info
| Inner diameter | 30.11 mm |
| Outer diameter | 77.95 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Flange Diameter | 139.71 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF00725)
- 1x SKF Nut (SKF04756)
Important compatibility info
| Belt Width | 23 mm |
| Number of Teeth | 142 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Replaces | VKMC06040 |
Additional Information
- 1x SKF Timing Belt Kit (VKMA06038)
- 1x SKF Water Pump, engine cooling (VKPC86618)
Important compatibility info
| Belt Width | 23 mm |
| Number of Teeth | 142 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Replaces | VKMC06040 |
Additional Information
- 1x SKF Timing Belt Kit (VKMA06038)
- 1x SKF Water Pump, engine cooling (VKPC86618)
Important compatibility info
| Voltage | 12 V |
| Placement on Vehicle | Rear |
| Function | Wiper Motor |
| Number of mounting bores | 3 |
| Mounting Type | Screw Connection |
| Extra Description | ORIGINAL PART |
| Type | Wiper Motor |
| Weight | 0.97 kg |
Important compatibility info
| Voltage | 12 V |
| Placement on Vehicle | Rear |
| Function | Wiper Motor |
| Number of mounting bores | 3 |
| Mounting Type | Screw Connection |
| Extra Description | ORIGINAL PART |
| Type | Wiper Motor |
| Weight | 0.97 kg |
Important compatibility info
| Replaces | ADM553117 |
| Paired article numbers | ADM553116 |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | ADM553117 |
| Paired article numbers | ADM553116 |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 450 mm |
| Width | 450 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 450 mm |
| Width | 450 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














