Bluecol 2 Year Antifreeze

Antifreeze concentrate based on mono-ethylene glycol, designed to give protection down to -36C. When mixed with water the antifreeze can be used as a factory fill or a service top-up coolant for suitable engine cooling systems. Designed for a life of 2 years and meets BS6580: (2010) Standard.
Directions for use:
1. Drain and flush the cooling system with clean water.
2. Check all hoses, clips and joints for leakage- tighten or replace where necessary.
3. Refer to vehicle manufacturer’s handbook for the total volume of the cooling system.
4. Remove radiator cap and add antifreeze to a volume equal to 25%, 33% or 50% of the total coolant system capacity (depending on protection desired and top up with clean water to recommended fill level. Replace cap.
5. Run engine until it reaches normal operating temperature to remove any air locks.
6. Switch off engine and allow to cool. Remove radiator cap and top up with water if necessary. Replace cap. Important Compatibility Info