Important compatibility info
| Number of Teeth | 23 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Hub Profile | 28.9 x 26.6 |
| Outer diameter | 258 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Parts | 2 -part |
| Additional Information 2 | Self-adjusting |
| Number of Teeth | 26 |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 26 |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 976 mm |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 28 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 977 mm |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 28 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Water Pump Pulley Diameter | 76 mm |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 8 |
| Additional Information 2 | switchable water pump |
| Impeller Diameter | 60 mm |
| Water pump impeller material | Plastic |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| Alternator Charge Current | 150 A |
| Number of Ribs | 5 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Number of Teeth | 21 |
| Hub Profile | 23.9 x 21.4 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Number of Seals | 1 |
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 89 mm |
| Type | Water Pump, engine cooling |
| Height | 136 mm |
| Number of Holes | 6 |
| Length | 320 mm |
| Number of Wings | 6 |
| Impeller Diameter | 135 mm |
Important compatibility info
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Hub Profile | 29 x 23.6 |
| Outer diameter | 235 mm |
| Function | Clutch Kit |
| Number of Teeth | 10 |
Important compatibility info
| Number of Teeth | 23 |
| Function | Conversion Set, clutch |
| Hub Profile | 26 x 23.2 |
| Type | Conversion Set, clutch |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 29 x 23.4 |
| Outer diameter | 267 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 10 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 25.9 x 24 |
| Outer diameter | 220 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 24 |
Important compatibility info
| Number of Parts | 2 -part |
| Outer diameter | 228 mm |
| Hub Profile | 28.9 x 26.6 |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Teeth | 26 |
| Type | Clutch Kit |
| Additional Information 2 | Self-adjusting |
Important compatibility info
| Number of Teeth | 23 |
| Hub Profile | 24.2 x 21.7 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Replaces | HKF1020; HKF1049 |
Important compatibility info
| Number of Teeth | 21 |
| Number of Parts | 3 -part |
| Hub Profile | 29.8 x 25.5 |
| Outer diameter | 236 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 23 |
| Hub Profile | 24.2 x 21.8 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Hub Profile | 26.2 x 23.2 |
| Type | Clutch Kit |
| Number of Teeth | 23 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 694 mm |
| Steering arm type | Triangular Control Arm (CV) |
Important compatibility info
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 132 mm |
| Impeller Diameter | 125 mm |
| Type | Water Pump, engine cooling |
| Height | 118 mm |
| Number of Holes | 9 |
| Number of Seals | 5 |
| Number of Wings | 12 |
Important compatibility info
| Number of Teeth | 14 |
| Function | Conversion Set, clutch |
| Hub Profile | 25.1 x 22 |
| Type | Conversion Set, clutch |
Important compatibility info
| Function | Conversion Set, clutch |
| Hub Profile | 24.2 x 21 |
| Type | Conversion Set, clutch |
| Number of Teeth | 23 |
Important compatibility info
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Hub Profile | 28.8 x 23.2 |
| Outer diameter | 241 mm |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 26 |
| Number of Parts | 2 -part |
| Outer diameter | 215 mm |
| Hub Profile | 28.8 x 26.6 |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 60 mm |
| Function | Alternator |
| Type | Alternator |
| Plug Type ID | B+;D+ |
| Number of mounting bores | 3 |
Important compatibility info
| Number of Teeth | 21 |
| Number of Parts | 3 -part |
| Hub Profile | 29.8 x 25.4 |
| Outer diameter | 260 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Water Pump, engine cooling |
| Number of Seals | 6 |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 59 mm |
| Impeller Diameter | 118.9 mm |
| Height | 136.5 mm |
| Number of Teeth | 24 |
| Number of Wings | 9 |
Important compatibility info
| Water Pump Pulley Diameter | 112 mm |
| Additional Information 2 | with sensor |
| Number of Ribs | 5 |
| Housing Type | with housing |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Important compatibility info
| Type | Clutch Kit |
| Number of Teeth | 10 |
| Hub Profile | 29 x 23 |
| Outer diameter | 230 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Additional Information 2 | Self-adjusting |
| Number of Parts | 3 -part |
Important compatibility info
| Water Pump Pulley Diameter | 85 mm |
| Function | Water Pump, engine cooling |
| Impeller Diameter | 135 mm |
| Length | 136.5 mm |
| Type | Water Pump, engine cooling |
| Number of Inlets / Outlets | 4 |
| Number of Wings | 7 |
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump |
| Function | Water Pump, engine cooling |
| Operating Mode | Mechanical |
| Type | Water Pump, engine cooling |
Important compatibility info
| Hub Profile | 29.7 x 25.4 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 21 |
Important compatibility info
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 2 |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 26.1 x 23.1 |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 250 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 23 |
Important compatibility info
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 18 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 23.5 x 20.3 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Number of Teeth | 17 |
| Type | Clutch Kit |
Important compatibility info
| Outer diameter | 254 mm |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Number of Teeth | 21 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 22.2 x 20.2 |
| Outer diameter | 230 mm |
| Function | Clutch Kit |
| Number of Teeth | 28 |
| Type | Clutch Kit |
Important compatibility info
| Function | Starter |
| Number of mounting bores | 2 |
| Rated Power | 2.5 kW |
| Rotation Direction | Clockwise rotation |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Type | Starter |
| Manufacturer Restriction | Hitachi |
Important compatibility info
| Number of Parts | 2 -part |
| Number of Teeth | 21 |
| Hub Profile | 24.5 x 21.3 |
| Additional Information 2 | Self-adjusting |
| Outer diameter | 227 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 50 mm |
| Number of mounting bores | 4 |
| Connector Shape | D Shape |
| Connector / Clamp | B+/L/DFM |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Hub Profile | 28.8 x 23.2 |
| Outer diameter | 241 mm |
| Number of Teeth | 10 |
| Type | Clutch Kit |
Important compatibility info
| Hub Profile | 22.1 x 20.3 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 28 |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 50 mm |
| Alternator Charge Current | 110 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 56 mm |
| Alternator Charge Current | 140 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Number of Teeth | 21 |
| Function | Conversion Set, clutch |
| Additional Information | without central slave cylinder |
| Number of Parts | 3 -part |
| Type | Conversion Set, clutch |
Important compatibility info
| Number of Teeth | 23 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Number of Teeth | 21 |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
Important compatibility info
| Number of Teeth | 26 |
| Number of Parts | 2 -part |
| Additional Information 2 | Self-adjusting |
| Hub Profile | 28.8 x 26.5 |
| Outer diameter | 239 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Type | Clutch Kit |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































