Important compatibility info
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 31 60 7 529 203 SK |
| Joint Type | CV Joint |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 83 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29247)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (27100)
- 3x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
| Material | FPM (fluoride rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (27797)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Gasket, centrifugal cleaner flange (35622)
Important compatibility info
| Outer diameter | 65 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Height | 55 mm |
| Internal Thread Size | M55 x 2 |
| Seal Material | FPM (fluoride rubber) |
| Type | Fuel filter |
| Additional Information | with attachment/mounting material |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 405 mm |
| Mounting points diameter | 20 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Length | 559 mm |
| Outer diameter | 45 mm |
| Number of Connectors / Ports | 2 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle |
| Length | 560 mm. 480 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread, with left-hand thread |
| Cone Size | 20 mm |
| Pipe Diameter | 30 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M24 x 1,5 RHT, M24 x 1,5 LHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 18 mm |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 119 mm |
| Additional Information | with nuts |
| Material | Steel |
| Outer diameter | 12 mm |
| Spanner Size | 18 |
| Paired article numbers | 48006 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 48005 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 119 mm |
| Material | Steel |
| External Thread Size | M12 x 1,5 |
| Outer diameter | 12 mm |
| Spanner Size | 18 |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 267 mm |
| Material | Steel |
| Outer diameter | 8 mm |
| Spanner Size | 17 |
| Paired article numbers | 48016 |
| Rod/Strut | Coupling Rod |
| Thread Length | 18 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 18 mm |
| Thickness | 33 mm |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Outer diameter | 7.9 mm |
| Length | 92 mm |
| Material | Steel |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Thread Length | 24.5 mm |
| Length | 253 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Inner diameter | 10.2 mm |
| Spanner Size | 19 |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 19 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Outer diameter | 7.9 mm |
| Thickness | 33.3 mm |
| Spanner Size | 13 |
| Length | 117 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M8 x 1,25 |
| Rod/Strut | Coupling Rod |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Material | Steel |
| Outer diameter | 9 mm |
| Spanner Size | 19 |
| Paired article numbers | 48035 |
| Length | 111 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 23.3 mm |
| Additional Information | with nuts |
| Replaces | 48035 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Rear Axle Left |
| Length | 88 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Thickness | 24.5 mm |
| Spanner Size | 19 |
| Paired article numbers | 48039 |
| Rod/Strut | Coupling Rod |
| Thread Length | 23 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 354 mm |
| Material | Steel |
| Outer diameter | 9 mm |
| Spanner Size | 17 |
| Paired article numbers | 48045 |
| Rod/Strut | Coupling Rod |
| Thread Length | 21.3 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 202 mm |
| Thickness | 34 mm |
| Spanner Size | 17 |
| Paired article numbers | 48060 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 48059 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 202 mm |
| Thickness | 34.1 mm |
| Spanner Size | 17 |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | outer, Front Axle Right |
| Length | 222 mm |
| Thickness | 34.4 mm |
| Paired article numbers | 48062 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 222 mm |
| Thickness | 34.4 mm |
| Paired article numbers | 48061 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 218.5 mm |
| Additional Information | with counter nut |
| External Thread Size | M16 x 1,5 |
| for OE number | 56540-0U500 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 228.7 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Outer diameter | 13 mm |
| Inner diameter | 11.2 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 139 mm |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Paired article numbers | 48100 |
| Material | Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ball joint |
| Material | Steel |
| Placement on Vehicle | Lower, Front Axle Right |
| Paired article numbers | 48099 |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 48102 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 48101 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Front, Lower, Rear Axle Right |
| Material | Steel |
| Additional Information 2 | with ball joint, with rubber mount |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48106 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Front Axle Left |
| Length | 188 mm |
| Spanner Size | 18 |
| Paired article numbers | 48109 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Front Axle Right |
| Length | 188 mm |
| Spanner Size | 18 |
| Paired article numbers | 48108 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48112 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 2 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | outer, Front Axle Right |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48111 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Outer diameter | 15 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 150 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Thread Length | 33.5 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 256 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Thread Length | 27 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 36.7 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 19 |
| Paired article numbers | 48141 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left |
| Length | 99 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Length | 96 mm |
| Paired article numbers | 48155 |
| Outer diameter | 9 mm |
| Rod/Strut | Coupling Rod |
| Thread Length | 22.2 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Type | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Thread Length | 22.2 mm |
| Length | 96 mm |
| Additional Information | with nuts |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 9 mm |
| Paired article numbers | 48154 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 19.7 mm |
| Mounting points diameter | 10.5 mm |
| Function | Ball Joint |
| External Thread Size | M18 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48180 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 100 mm |
| Paired article numbers | 48194 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5, M22 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 100 mm |
| Paired article numbers | 48193 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M22 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 48213 |
| Thread Length | 33 mm |
| Spanner Size | 21 |
| Inner diameter | 14.1 mm |
| Outer diameter | 11 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left |
| Length | 136 mm |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 136 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Spanner Size | 21 |
| Material | Steel |
| Paired article numbers | 48212 |
| Thread Length | 33 mm |
| Outer diameter | 11 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Inner diameter | 14.2 mm |
| Material | Steel |
| Outer diameter | 18.5 mm |
| Length | 199 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 260 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Diameter | 1 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 26.5 mm |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M15 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 501 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 170 mm |
| Inner diameter | 127 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 60 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































