Important compatibility info
| Compressor Oil | PAG 46 |
| Pulleys | with V-ribbed belt pulley |
| Manufacturer Restriction | MITSUBISHI, EQUIVALENT |
| Function | Compressor, air conditioning |
| Refrigerant | R 134a |
| Connector Shape | round |
| Extra Description | EASY FIT |
| Type | Compressor, air conditioning |
| Number of grooves | 4 |
| Oil Fill Quantity | 50 ml |
| Compressor ID | QS70 |
| Outlet Diameter | 15.5 mm |
| Voltage | 12 V |
| Additional Information 2 | with seal ring |
| Inlet Diameter | 18.3 mm |
| Belt Pulley Diameter | 93 mm |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of grooves | 7 |
| Inner diameter | 32 mm |
| Outer diameter | 153 mm |
| Width | 73 mm |
| Additional Information | with accessories |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
| Type | Belt Pulley, crankshaft |
Additional Information
- 1x Gates Bolt and Nut Kit (SET119)
Important compatibility info
| Number of grooves | 7 |
| Inner diameter | 32 mm |
| Outer diameter | 153 mm |
| Width | 73 mm |
| Additional Information | with accessories |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
| Type | Belt Pulley, crankshaft |
Additional Information
- 1x Gates Bolt and Nut Kit (SET119)
Important compatibility info
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
Additional Information
Important compatibility info
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
Additional Information
Important compatibility info
| Running surface internal diameter | 152.0 mm |
| Hub fastening hole diameter | 12.6 mm |
| External diameter, clutch pressure plate | 263 mm |
| Type | Flywheel |
| Number of Teeth | 112 |
| Function | Flywheel |
| Pitch circle diameter, hub | 75 mm |
| Hub internal diameter | 37.6 mm |
| Number of clutch pressure plate fastening holes | 6 |
| Hub external diameter | 145.2 mm |
| Pitch circle diameter, clutch pressure plate | 260 mm |
| Number of hub fastening holes | 6 |
| Replaces | ADW193079 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Running surface internal diameter | 152.0 mm |
| Hub fastening hole diameter | 12.6 mm |
| External diameter, clutch pressure plate | 263 mm |
| Type | Flywheel |
| Number of Teeth | 112 |
| Function | Flywheel |
| Pitch circle diameter, hub | 75 mm |
| Hub internal diameter | 37.6 mm |
| Number of clutch pressure plate fastening holes | 6 |
| Hub external diameter | 145.2 mm |
| Pitch circle diameter, clutch pressure plate | 260 mm |
| Number of hub fastening holes | 6 |
| Replaces | ADW193079 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with dual-mass flywheel, with central slave cylinder |
| Material | Plastic |
| Additional Information 2 | with screw set, with lock screw set, without sensor |
| Number of Teeth | 20 |
| Bore Diameter | 28 mm |
| Weight | 19.8 kg |
| Number of mounting bores | 6 |
| Mounting Type | Clipped |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | FULLPACK DMF (CSC) with High Efficiency Clutch |
| Number of mounting bores at central releaser | 2 |
| External diameter, clutch pressure plate | 240 mm |
| Replaces | 837453 |
| Tightening Torque | 30 Nm |
| Tightening angle | 90 ° |
Additional Information
- 1x Valeo Central Slave Cylinder, clutch (810101)
Important compatibility info
| Additional Information | with dual-mass flywheel, with central slave cylinder |
| Material | Plastic |
| Additional Information 2 | with screw set, with lock screw set, without sensor |
| Number of Teeth | 20 |
| Bore Diameter | 28 mm |
| Weight | 19.8 kg |
| Number of mounting bores | 6 |
| Mounting Type | Clipped |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | FULLPACK DMF (CSC) with High Efficiency Clutch |
| Number of mounting bores at central releaser | 2 |
| External diameter, clutch pressure plate | 240 mm |
| Replaces | 837453 |
| Tightening Torque | 30 Nm |
| Tightening angle | 90 ° |
Additional Information
- 1x Valeo Central Slave Cylinder, clutch (810101)
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Function | Injector Nozzle |
| for OE number | 8-98260109-0 |
| Manufacturer Restriction | Isuzu |
| Type | Injector Nozzle |
| Quality | OE specification |
| Weight | 650 g |
| Operating Mode | electronically controlled |
| Replaces | DCRI300910 |
| Gross Weight | 850 g |
| alternative item | - |
Important compatibility info
| Function | Injector Nozzle |
| for OE number | 8-98260109-0 |
| Manufacturer Restriction | Isuzu |
| Type | Injector Nozzle |
| Quality | OE specification |
| Weight | 650 g |
| Operating Mode | electronically controlled |
| Replaces | DCRI300910 |
| Gross Weight | 850 g |
| alternative item | - |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles without xenon light |
| Paired article numbers | 1LL 011 165-741 |
| Bulb Type | PY21W, W21W, HIR2 |
| Light Function | with position light, with low beam, with daytime running light, with indicator, with high beam |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, DE |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Code | AVN |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb, spotlight (8GH009319-001)
- 1x Hella Actuator, headlight levelling (6NM010553-601)
- 2x Hella Bulb (8GP003594-121)
- 1x Hella Bulb (8GD008893-002)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles without xenon light |
| Paired article numbers | 1LL 011 165-741 |
| Bulb Type | PY21W, W21W, HIR2 |
| Light Function | with position light, with low beam, with daytime running light, with indicator, with high beam |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, DE |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Code | AVN |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb, spotlight (8GH009319-001)
- 1x Hella Actuator, headlight levelling (6NM010553-601)
- 2x Hella Bulb (8GP003594-121)
- 1x Hella Bulb (8GD008893-002)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles without xenon light |
| Paired article numbers | 1LL 011 165-731 |
| Bulb Type | HIR2, PY21W, W21W |
| Light Function | with high beam, with indicator, with daytime running light, with position light, with low beam |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, DE |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Code | AVN |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb, spotlight (8GH009319-001)
- 1x Hella Actuator, headlight levelling (6NM010553-601)
- 2x Hella Bulb (8GP003594-121)
- 1x Hella Bulb (8GD008893-002)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information 2 | with bulbs, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles without xenon light |
| Paired article numbers | 1LL 011 165-731 |
| Bulb Type | HIR2, PY21W, W21W |
| Light Function | with high beam, with indicator, with daytime running light, with position light, with low beam |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, DE |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Code | AVN |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 1x Hella Bulb, spotlight (8GH009319-001)
- 1x Hella Actuator, headlight levelling (6NM010553-601)
- 2x Hella Bulb (8GP003594-121)
- 1x Hella Bulb (8GD008893-002)
Important compatibility info
| Additional Information | without gasket/seal |
| Net weight | 1.120 kg |
| Function | Throttle body |
| Mounting Type | Bolted |
| Connector Shape | Oval |
| Housing Colour | Black |
| Inlet Diameter | 55 mm |
| Number of Poles | 8 -pin connector |
| Weight | 1.223 kg |
| Type | Throttle body |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023










