Important compatibility info
| Manufacturer Restriction | Denso |
| Number of Inlets / Outlets | 3 |
| Housing Colour | Brown |
| Net weight | 0.652 kg |
| Type | Nozzle and Holder Assembly |
| Function | Nozzle and Holder Assembly |
Important compatibility info
| Manufacturer Restriction | Denso |
| Number of Inlets / Outlets | 3 |
| Housing Colour | Brown |
| Net weight | 0.652 kg |
| Type | Nozzle and Holder Assembly |
| Function | Nozzle and Holder Assembly |
Important compatibility info
| Number of Poles | 4 -pin connector |
| Operating Mode | Electric |
| Connector Shape | Rectangular |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Number of Poles | 4 -pin connector |
| Operating Mode | Electric |
| Connector Shape | Rectangular |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Diameter | 60 mm |
| Additional Information | without gasket/seal, with accessories |
| Operating Mode | Electric |
| Number of screws | 3 |
| Part number of recommended accessories | VDO A2C59516954, BMW 11 61 7 528 174, PSA 0348T5 |
| Type | Throttle body |
| Function | Throttle body |
| Extra Info | Have to be taught/updated. | Mandatory - check new part against old part (in particular O E No.) |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Fuel Type | Petrol |
Additional Information
General Information
Components at risk due to electrostatic discharge (DO NOT TO UCH PLUG CONTACTS)
Important compatibility info
| Diameter | 60 mm |
| Additional Information | without gasket/seal, with accessories |
| Operating Mode | Electric |
| Number of screws | 3 |
| Part number of recommended accessories | VDO A2C59516954, BMW 11 61 7 528 174, PSA 0348T5 |
| Type | Throttle body |
| Function | Throttle body |
| Extra Info | Have to be taught/updated. | Mandatory - check new part against old part (in particular O E No.) |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Fuel Type | Petrol |
Additional Information
General Information
Components at risk due to electrostatic discharge (DO NOT TO UCH PLUG CONTACTS)
Important compatibility info
| Placement on Vehicle | Front |
| Material | Ceramic |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 5 |
| To be used with part number(s) | FK92213 |
Important compatibility info
| Placement on Vehicle | Front |
| Material | Ceramic |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Product met | Euro 5 |
| To be used with part number(s) | FK92213 |
Important compatibility info
| Diameter | 260 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
| Replaces | 626303933 |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003510)
- 1x LuK Clutch Kit (626307209)
Important compatibility info
| Diameter | 260 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
| Replaces | 626303933 |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003510)
- 1x LuK Clutch Kit (626307209)
Important compatibility info
Important compatibility info
| Inspection Tag | E57-103R |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| To be used with part number(s) | FK90524 |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E57-103R |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| To be used with part number(s) | FK90524 |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Weight | 12600 g |
| Number of Teeth | 12 |
| Port / Connector type | G |
| Rotation Direction | Clockwise rotation |
| Rated Voltage | 24 V |
| Rated Power | 7.5 kW |
| Specification | M105R |
| Closing Angle | 146 degree |
| Type | Starter |
| Fitting Angle | 275 |
| Function | Starter |
Important compatibility info
| Weight | 12600 g |
| Number of Teeth | 12 |
| Port / Connector type | G |
| Rotation Direction | Clockwise rotation |
| Rated Voltage | 24 V |
| Rated Power | 7.5 kW |
| Specification | M105R |
| Closing Angle | 146 degree |
| Type | Starter |
| Fitting Angle | 275 |
| Function | Starter |
Important compatibility info
| Weight | 4890 g |
| Length | 210 mm |
| Height | 138 mm |
| Number of Ribs | 6 |
| Belt Pulley Diameter | 100 mm |
| Mounting Type | Bolted |
| for OE number | A0002309111;A0012300 |
| Refrigerant | R 134a |
| Compressor ID | 7SEU17C |
| Quality | OE |
| Compressor Oil | ND-8 |
| Oil Fill Quantity | 120 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, MERCEDES-BENZ |
| Function | Compressor, air conditioning |
| Extra Info | DL-Pulley |
| Gross Weight | 5700 g |
Important compatibility info
| Function | Water Pump, engine cooling |
| Extra Description | FleetRunner™ |
| Type | Water Pump, engine cooling |
| Pulleys | without belt pulley, for v-belt pulley |
| Material | Metal |
| Additional Information | with gaskets/seals |
Important compatibility info
| Function | Water Pump, engine cooling |
| Extra Description | FleetRunner™ |
| Type | Water Pump, engine cooling |
| Pulleys | without belt pulley, for v-belt pulley |
| Material | Metal |
| Additional Information | with gaskets/seals |
Important compatibility info
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 37 22 6 787 617 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 37 22 6 787 617 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information | with relay |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information | with relay |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Important compatibility info
| Number of Teeth | 18 |
| Number of Parts | 3 -part |
| Hub Profile | 19.3 x 17 |
| Outer diameter | 190 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 18 |
| Number of Parts | 3 -part |
| Hub Profile | 19.3 x 17 |
| Outer diameter | 190 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Extra Description | 3-1 Kit |
| Number of Teeth | 24 |
| Additional Information 2 | with bearing |
| Hub Profile | 25,6 |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 220 mm |
| Type | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Release Bearing (CCT537)
Important compatibility info
| Extra Description | 3-1 Kit |
| Number of Teeth | 24 |
| Additional Information 2 | with bearing |
| Hub Profile | 25,6 |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 220 mm |
| Type | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Release Bearing (CCT537)
Important compatibility info
| Cold Cranking Amperage (CCA) | 710 A |
| Width | 173 mm |
| Height without pole | 183 mm |
| Voltage | 12 V |
| Height | 198 mm |
| Battery Capacity 10h (Ah) | 56 Ah |
| Warranty | 2 year warranty |
| Terminal Layout | Positive Front Left |
| PHCA (5 sec) | 1300 A |
| Marine Cranking Amperage (MCA) | 810 A |
| Terminal Type | Dual Terminal |
| Type | AGM |
| Ampere-Hours | 60 A |
| Length | 277 mm |
Important compatibility info
| Function | Flywheel |
| Type | Flywheel |
| Outer diameter | 303 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 14.3 kg |
| Extra Description | DUAL MASS FLYWHEEL |
| Additional Information 2 | without screw set |
Important compatibility info
| Function | Flywheel |
| Type | Flywheel |
| Outer diameter | 303 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 14.3 kg |
| Extra Description | DUAL MASS FLYWHEEL |
| Additional Information 2 | without screw set |
Important compatibility info
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| Labels & Certifications | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11118, PP11118A, PP11118B |
| Product met | Euro 4 |
Important compatibility info
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| Labels & Certifications | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11118, PP11118A, PP11118B |
| Product met | Euro 4 |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Function | EGR Valve |
| Operating Mode | Electric |
| Connector Shape | Oval |
| Type | EGR Valve |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Function | EGR Valve |
| Operating Mode | Electric |
| Connector Shape | Oval |
| Type | EGR Valve |
Important compatibility info
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 120 mm |
| Compressor ID | DVE16 |
| Compressor Oil | PAG 46 |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | GENUINE DOOWON |
| Function | Compressor, air conditioning |
| Extra Description | GENUINE |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 120 mm |
| Compressor ID | DVE16 |
| Compressor Oil | PAG 46 |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | GENUINE DOOWON |
| Function | Compressor, air conditioning |
| Extra Description | GENUINE |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Number of mounting bores | 6 |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Number of mounting bores | 6 |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Extra Description | DUAL MASS FLYWHEEL |
| Function | Flywheel |
| for flywheel depth | 58.85 mm |
| Number of mounting bores | 8 |
| Engine Version | for engines with dual-mass flywheel |
| Additional Information 2 | with screw set |
| Outer diameter | 289 mm |
| Replaces | 836193 |
| Type | Flywheel |
| Weight | 11.892 kg |
| Tightening Torque | 105 Nm |
Important compatibility info
| Extra Description | DUAL MASS FLYWHEEL |
| Function | Flywheel |
| for flywheel depth | 58.85 mm |
| Number of mounting bores | 8 |
| Engine Version | for engines with dual-mass flywheel |
| Additional Information 2 | with screw set |
| Outer diameter | 289 mm |
| Replaces | 836193 |
| Type | Flywheel |
| Weight | 11.892 kg |
| Tightening Torque | 105 Nm |
Important compatibility info
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
| Replaces | 623316933 |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003310)
- 1x LuK Clutch Kit (624316209)
Important compatibility info
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
| Replaces | 623316933 |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003310)
- 1x LuK Clutch Kit (624316209)
Important compatibility info
| Replaces | 626309233 |
| Diameter | 260 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510015210)
- 1x LuK Clutch Kit (626301409)
Important compatibility info
| Replaces | 626309233 |
| Diameter | 260 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510015210)
- 1x LuK Clutch Kit (626301409)
Important compatibility info
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Voltage | 24 V |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 165 ml |
| Number of grooves | 4 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 165 ml |
| Number of grooves | 4 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 240 mm |
| Function | Flywheel |
| Additional Information | with flywheel screws |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023




















