Important compatibility info
| Quality | OE-EQUIVALENT |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Number of grooves | 6 |
| Compressor Oil | PAG 46 YF |
| Compressor ID | VS16 |
| Outlet Diameter | 22.1 mm |
| Inlet Diameter | 24.3 mm |
| Belt Pulley Diameter | 110 mm |
| Pulleys | with v-ribbed belt pulley |
| Oil Fill Quantity | 150 ml |
| Voltage | 12 V |
| Connector Shape | rectangular |
| Extra Description | EASY FIT |
| Type | Compressor, air conditioning |
| Additional Information 2 | with seal ring |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Quality | OE-EQUIVALENT |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Number of grooves | 6 |
| Compressor Oil | PAG 46 YF |
| Compressor ID | VS16 |
| Outlet Diameter | 22.1 mm |
| Inlet Diameter | 24.3 mm |
| Belt Pulley Diameter | 110 mm |
| Pulleys | with v-ribbed belt pulley |
| Oil Fill Quantity | 150 ml |
| Voltage | 12 V |
| Connector Shape | rectangular |
| Extra Description | EASY FIT |
| Type | Compressor, air conditioning |
| Additional Information 2 | with seal ring |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Gross Weight | 850 g |
| Type | Injector Nozzle |
| Quality | OE specification |
| Weight | 650 g |
| Operating Mode | electronically controlled |
| for OE number | 1465A439 |
| Manufacturer Restriction | Mitsubishi |
| Function | Injector Nozzle |
Important compatibility info
| Gross Weight | 850 g |
| Type | Injector Nozzle |
| Quality | OE specification |
| Weight | 650 g |
| Operating Mode | electronically controlled |
| for OE number | 1465A439 |
| Manufacturer Restriction | Mitsubishi |
| Function | Injector Nozzle |
Important compatibility info
| Gross Weight | 920 g |
| Function | Injector Nozzle |
| Manufacturer Restriction | Isuzu |
| Type | Injector Nozzle |
| Quality | OE specification |
| for OE number | 8-97609788-6 |
| Operating Mode | electronically controlled |
| Weight | 720 g |
Important compatibility info
| Gross Weight | 920 g |
| Function | Injector Nozzle |
| Manufacturer Restriction | Isuzu |
| Type | Injector Nozzle |
| Quality | OE specification |
| for OE number | 8-97609788-6 |
| Operating Mode | electronically controlled |
| Weight | 720 g |
Important compatibility info
| Extra Description | EASY FIT |
| Voltage | 12 V |
| Additional Information 2 | with seal ring |
| Function | Compressor, air conditioning |
| Compressor ID | VS16 |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Type | Compressor, air conditioning |
| Number of grooves | 5 |
| Oil Fill Quantity | 160 ml |
| Compressor Oil | PAG 46 YF |
| Refrigerant | R 1234yf, R 134a |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 108 mm |
| Inlet Diameter | 22.7 mm |
| Outlet Diameter | 18.4 mm |
| Connector Shape | oval |
| Quality | OE-EQUIVALENT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Extra Description | EASY FIT |
| Voltage | 12 V |
| Additional Information 2 | with seal ring |
| Function | Compressor, air conditioning |
| Compressor ID | VS16 |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Type | Compressor, air conditioning |
| Number of grooves | 5 |
| Oil Fill Quantity | 160 ml |
| Compressor Oil | PAG 46 YF |
| Refrigerant | R 1234yf, R 134a |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 108 mm |
| Inlet Diameter | 22.7 mm |
| Outlet Diameter | 18.4 mm |
| Connector Shape | oval |
| Quality | OE-EQUIVALENT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Mounting Type | Bolted |
| Belt Pulley Diameter | 109 mm |
| Number of Ribs | 6 |
| for OE number | 9819714980; 98197148 |
| Refrigerant | R 1234yf, R 134a |
| Quality | OE |
| Compressor ID | 5SEL12 |
| Weight | 4356 g |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | CITROEN-PEUGEOT, DENSO |
| Type | Compressor, air conditioning |
| Number of grooves | 6 |
| Oil Fill Quantity | 80 ml |
| Compressor Oil | ND-12 |
| Gross Weight | 5166 g |
Important compatibility info
| Mounting Type | Bolted |
| Belt Pulley Diameter | 109 mm |
| Number of Ribs | 6 |
| for OE number | 9819714980; 98197148 |
| Refrigerant | R 1234yf, R 134a |
| Quality | OE |
| Compressor ID | 5SEL12 |
| Weight | 4356 g |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | CITROEN-PEUGEOT, DENSO |
| Type | Compressor, air conditioning |
| Number of grooves | 6 |
| Oil Fill Quantity | 80 ml |
| Compressor Oil | ND-12 |
| Gross Weight | 5166 g |
Important compatibility info
| Function | Propshaft, axle drive |
| Bolt Hole Circle Diameter 1 | 80 mm |
| Length | 688 mm |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| No. of holes 2 | 6 |
| Bolt Hole Circle Diameter 2 | 80 mm |
| No. of holes 1 | 6 |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Type | Particle Sensor |
| Function | Particle Sensor |
Important compatibility info
| Type | Particle Sensor |
| Function | Particle Sensor |
Important compatibility info
| Length | 181 mm |
| Voltage | 28 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 55 A |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Fastening Type | Single pivoted lever |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Length | 181 mm |
| Voltage | 28 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 55 A |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Fastening Type | Single pivoted lever |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003510)
- 1x LuK Clutch Kit (624324319)
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003510)
- 1x LuK Clutch Kit (624324319)
Important compatibility info
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Additional Information | with central slave cylinder |
| Diameter | 270 mm |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510023511)
- 1x LuK Clutch Kit (627303209)
Important compatibility info
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Additional Information | with central slave cylinder |
| Diameter | 270 mm |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510023511)
- 1x LuK Clutch Kit (627303209)
Important compatibility info
| Additional Information 2 | without magnetic clutch, with seal ring |
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 115 mm |
| Inlet Diameter | 28.4 mm |
| Outlet Diameter | 16.7 mm |
| Connector Shape | oval |
| Compressor ID | 6SEU16C |
| Compressor Oil | PAG 46 |
| Oil Fill Quantity | 120 ml |
| Number of grooves | 5 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO-EQUIVALENT |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Additional Information 2 | without magnetic clutch, with seal ring |
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Belt Pulley Diameter | 115 mm |
| Inlet Diameter | 28.4 mm |
| Outlet Diameter | 16.7 mm |
| Connector Shape | oval |
| Compressor ID | 6SEU16C |
| Compressor Oil | PAG 46 |
| Oil Fill Quantity | 120 ml |
| Number of grooves | 5 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO-EQUIVALENT |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Terminal Type | Female Thread |
| Voltage | 12 V |
| Weight | 33000 |
| Type | AGM |
| Height | 236 mm |
| Width | 172 mm |
| Ampere-Hours | 115 A |
| Terminal Layout | Positive Front Left |
| Length | 328 mm |
| Battery Capacity 100h (Ah) | 128 Ah |
| Warranty | 1 year warranty |
Important compatibility info
| Outer diameter | 240 mm |
| Function | Flywheel |
| Additional Information | with flywheel screws |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
Important compatibility info
| Outer diameter | 240 mm |
| Function | Flywheel |
| Additional Information | with flywheel screws |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
Important compatibility info
| Additional Information | with mounting tool, with flywheel screws |
| Function | Flywheel |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
Additional Information
- 1x Sachs Screw Set, flywheel (1874000033)
Important compatibility info
| Additional Information | with mounting tool, with flywheel screws |
| Function | Flywheel |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
Additional Information
- 1x Sachs Screw Set, flywheel (1874000033)
Important compatibility info
| Fastening hole angle measurement [Degree] | 15 ° |
| Function | Starter |
| Starter Type | Floating pinion |
| Type | Starter |
| Pinion Rest Position | 31 mm |
| Connecting Angle | 15 ° |
| Clamp | 30 |
| Position / Degree | links ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 70 mm |
| Rated Power | 2 kW |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Thread Size | M10 |
| Length | 233 mm |
| Number of mounting bores | 2 |
Important compatibility info
| Fastening hole angle measurement [Degree] | 15 ° |
| Function | Starter |
| Starter Type | Floating pinion |
| Type | Starter |
| Pinion Rest Position | 31 mm |
| Connecting Angle | 15 ° |
| Clamp | 30 |
| Position / Degree | links ° |
| Number of Thread Bores | 2 |
| Flange Diameter | 70 mm |
| Rated Power | 2 kW |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 1 | M10x1.5 |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Thread Size | M10 |
| Length | 233 mm |
| Number of mounting bores | 2 |
Important compatibility info
| Type | Injector Nozzle |
| Weight | 640 g |
| Manufacturer Restriction | Isuzu |
| Function | Injector Nozzle |
| Operating Mode | electronically controlled |
| for OE number | 8-98011605-1 |
| Replaces | DCRI106170 |
| Quality | OE specification |
| Gross Weight | 840 g |
| alternative item | - |
Important compatibility info
| Type | Injector Nozzle |
| Weight | 640 g |
| Manufacturer Restriction | Isuzu |
| Function | Injector Nozzle |
| Operating Mode | electronically controlled |
| for OE number | 8-98011605-1 |
| Replaces | DCRI106170 |
| Quality | OE specification |
| Gross Weight | 840 g |
| alternative item | - |
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Steel |
| Type | EGR Module |
| Function | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Steel |
| Type | EGR Module |
| Function | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Function | Alternator |
| Belt Pulley Diameter | 50 mm |
| Alternator Charge Current | 190 A |
| Type | Alternator |
| Voltage | 12 V |
| Manufacturer Restriction | Delco |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Function | Alternator |
| Belt Pulley Diameter | 50 mm |
| Alternator Charge Current | 190 A |
| Type | Alternator |
| Voltage | 12 V |
| Manufacturer Restriction | Delco |
Important compatibility info
| Length | 285 mm |
| Function | Oil Pump |
| Inner diameter 1 | 39 mm |
| Inner diameter 2 | 29 mm |
| Width | 140 mm |
| Thickness | 90 mm |
| Number of Teeth | 23 |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 285 mm |
| Function | Oil Pump |
| Inner diameter 1 | 39 mm |
| Inner diameter 2 | 29 mm |
| Width | 140 mm |
| Thickness | 90 mm |
| Number of Teeth | 23 |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Approved |
| Product met | Euro 5 |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK91926 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Product met | Euro 5 |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK91926 |
| Material | Ceramic |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Height | 31.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Number of Holes | 63.5 |
| Brake Disc Type | solid |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 316 mm |
| Thickness | 14 mm |
| Height 1 | 49 mm |
| Number of wear indicators | 2 Per Axle |
| Height 2 | 53 mm |
| Width | 123 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Kit, disc brake |
| Surface | Coated |
| Centering Diameter | 5 mm |
| Extra Description | BEYOND LINE - EV |
| Type | Brake Kit, disc brake |
| Minimum thickness | 9 mm |
Additional Information
- 2x Brembo Brake Disc (08.N410.1E)
- 4x Brembo Brake Pad Set, disc brake (P24257E)
Important compatibility info
| Height | 31.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Number of Holes | 63.5 |
| Brake Disc Type | solid |
| Brake Disc Thickness | 11 mm |
| Outer diameter | 316 mm |
| Thickness | 14 mm |
| Height 1 | 49 mm |
| Number of wear indicators | 2 Per Axle |
| Height 2 | 53 mm |
| Width | 123 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Kit, disc brake |
| Surface | Coated |
| Centering Diameter | 5 mm |
| Extra Description | BEYOND LINE - EV |
| Type | Brake Kit, disc brake |
| Minimum thickness | 9 mm |
Additional Information
- 2x Brembo Brake Disc (08.N410.1E)
- 4x Brembo Brake Pad Set, disc brake (P24257E)
Important compatibility info
| Function | Electric Motor, tailgate |
| Stroke | 161 mm |
| Length | 575.5 mm |
| Extra Description | // POWERISE® |
| Type | Electric Motor, tailgate |
| Placement on Vehicle | both sides |
Important compatibility info
| Function | Electric Motor, tailgate |
| Stroke | 161 mm |
| Length | 575.5 mm |
| Extra Description | // POWERISE® |
| Type | Electric Motor, tailgate |
| Placement on Vehicle | both sides |
Important compatibility info
| Type | Injector |
| Function | Injector |
| Gross Weight | 0.646 kg |
| for OE number | 504386427 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























