Important compatibility info
| Additional Information 2 | with ball joint |
| Cone Size | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| External Thread Size | M10 x 1,25 |
| Paired article numbers | 177967 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Sheet Steel |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Width | 46 mm |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 72 mm |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Additional Information | with rubber mounts, with lock nut |
| Cone Size | 17 mm |
| Paired article numbers | 178645 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with ball joint |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Roller Guide, sliding door |
| Type | Roller Guide, sliding door |
| Colour | Black |
| Placement on Vehicle | Upper Left |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Type | Tie Rod End |
| Spanner Size | 24 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Paired article numbers | 183508 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 91 mm |
| Filter type | In-Line Filter, with water drain screw, with filter heating |
| Height | 171 mm |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Dipstick |
| Function | Oil Dipstick |
| Length from grip collar to max. marking | 1606 mm |
| Length from grip collar to min. marking | 1669 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 2N0 412 303 H S1 |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187821)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
Important compatibility info
| Additional Information 2 | with clamps |
| Material | CR (chloroprene rubber) |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Length | 512 mm |
| Paired article numbers | 193253 |
| Housing Diameter | 26 mm |
| Eject Force | 175 N |
| Stroke | 182 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 300.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 37470 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| for OE number | 16100-28041 |
| Housing material | Cast Aluminium |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Outer diameter | 55 mm |
| Inner diameter | 14.5 mm. 17 mm |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 45 mm |
| Outer diameter | 85 mm. 149.5 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 12.5 mm |
| Thread Pitch | 1.5 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension, propshaft |
| Width | 36 mm |
| Outer diameter | 50 mm |
| Hole Spacing | 160 mm |
| Additional Information 2 | with rolling bearing |
| Thickness | 105 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 177966 |
| Additional Information 2 | with ball joint |
| Cone Size | 14 mm |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right, Upper |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 29144 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Replaces | 185224 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Thickness | 90 mm |
| Inner diameter | 12 mm |
| Function | Bush Set, axle beam |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (31694)
- 2x Febi Bolt, axle beam mounting (26142)
- 2x Febi Nut (14392)
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















