Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Tie Rod |
| Length | 348 mm |
| Outer diameter | 60 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with nut, with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (27210)
- 1x Febi Bellow Kit, steering (26347)
£38.46
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Centre |
| Additional Information | with fastening/mounting material |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 192996 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (103726)
- 2x Febi Fastening Bolt, control arm (177562)
- 1x Febi Fastening Bolt, control arm (175145)
£38.46
Important compatibility info
| Placement on Vehicle | Wheel Side |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 72.5 mm |
| Length | 189 mm |
| External Thread Size | M28 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 106 mm |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 24417 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (182616)
- 1x Febi Rolling Bearing, suspension strut support mount (193989)
£38.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Additional Information 2 | with quick couplers |
| Turbocharger line | Intake Manifold to piping |
| Placement on Vehicle | Throttle Housing, Left |
| Material | ACM (Polyacrylate) |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Number of grooves | 6 |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Function | V-Ribbed Belt Set |
| Length | 975 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28908)
- 1x Febi Belt Tensioner, v-ribbed belt (22369)
£38.46
Important compatibility info
| Additional Information | with adjuster |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| for OE number | 8R0 827 505 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Outer Length | 115 mm |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Thickness | 85 mm |
| Width | 115 mm |
| Placement on Vehicle | Left Rear |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 114.6 mm |
| Width | 91.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Length | 654 mm |
| Height | 122 mm |
| Width | 170 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 207 mm |
| Width | 100 mm |
| Thickness | 26 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, electric motor (E-Axle) |
| Function | Mounting, electric motor (E-Axle) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Colour | Red |
| Number of Connectors / Ports | 10 |
| Function | Hazard Warning Light Switch |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Control Type | Button Actuation |
| Housing Colour | Black |
| Placement on Vehicle | Dashboard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.2 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with bolts/screws |
| Width | 79 mm. 70.1 mm |
| Length | 129 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (109594)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
£38.43
Important compatibility info
| Internal Thread Size | M10 x 1,25 |
| Number of Connectors / Ports | 3 |
| Function | Pressure Switch, air conditioning |
| Type | Pressure Switch, air conditioning |
| for OE number | 5 471 192 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.43
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Pressure Switch, air conditioning |
| Internal Thread Size | M10 x 1,25 |
| Type | Pressure Switch, air conditioning |
| for OE number | 9678362280 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.43
Important compatibility info
| Outer diameter | 91 mm |
| Filter type | In-Line Filter, with water drain screw, with filter heating |
| Height | 171 mm |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.43
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 80 mm |
| Thickness | 94 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.42
Important compatibility info
| Outer diameter | 35 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left Front |
| Type | Mounting, engine |
| for OE number | 56 84 048 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Width | 19.4 mm |
| Outer diameter | 64 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100 |
| Timing Chain Size | G67HP, G67HR |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Length | 75 mm |
| Outer diameter | 39.8 mm. 46 mm |
| Spanner Size | 19 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 2 |
| Control Range | 0,25+0,15 bar |
| Function | Sensor, oil pressure |
| Switch point to | 5 bar |
| for OE number | 001 542 56 17 |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, oil pressure |
| Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Type | Seal kit, automatic adjustment |
| Function | Seal kit, automatic adjustment |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 187 mm |
| Material | Steel |
| Spanner Size | 17 |
| External Thread Size | M10 x 1,5 |
| Diameter | 1 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | Black |
| Rod/Strut | Coupling Rod |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers, with nut |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Expansion Tank, coolant |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 042 |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Stroke | 240 mm |
| Function | Gas Spring, bonnet |
| Housing length | 331.5 mm |
| Eject Force | 250 N |
| Paired article numbers | 103850 |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Length | 619 mm |
| Placement on Vehicle | Left |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 190 mm |
| Material | CR (chloroprene rubber) |
| Thread Size | M26 x 1,5 |
| External Teeth, Wheel Side | 32 |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 110 mm |
| Thickness | 32 mm |
| Inner diameter | 38 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Replaces | 04095 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 46.1 mm |
| Brake Disc Thickness | 13 mm |
| Minimum thickness | 11 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 252 mm |
| Thickness | 40 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 45.5 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Additional Information | with grease |
| Length | 382 mm |
| Outer diameter | 248 mm |
| Inner diameter | 120 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22133 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.37
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 64 mm |
| Material | Rubber/Metal |
| Outer diameter | 64 mm |
| Thickness | 64 mm |
| Inner diameter | 19 mm |
| Function | Mounting, stabiliser bar |
| Length | 147 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.37
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.37
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 260 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 539 mm |
| Housing Diameter | 19 mm |
| Eject Force | 385 N |
| Stroke | 187 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 306.5 mm |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
Important compatibility info
| Outer diameter | 64 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
Important compatibility info
| Bolt Hole Circle Diameter | 140 mm |
| Inner diameter | 29 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 160 mm |
| Outer diameter | 160.5 mm |
| Additional Information 2 | without wheel bearing, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139.5 mm |
| Width | 88 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | R90 |
| Thickness/Strength 1 | 17.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 106710 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023