Important compatibility info
| Diameter | 40.4 mm |
| Steering arm type | for control arm |
| Bore Diameter 2 | 24.8 mm |
| Version | Fitting Kit |
| Thread Measurement 1 | M14x1.5 |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter 1 | 13.8 mm |
Important compatibility info
| Function | Ball Joint |
| Thread Size | M14x1.5 |
| Width | 88 mm |
| Height | 84 mm |
| Length | 150 mm |
| Type | Ball Joint |
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Mounting points diameter | 10.5 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information | with attachment/mounting material |
| Steering arm type | for control arm |
| Cone Size 1 | 15 mm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (24847)
- 3x Febi Screw (24362)
- 3x Febi Nut (24361)
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Model | CARENS CEED i30 MAGENTIS PRO CEED |
| Manufacturer | HYUNDAI KIA |
| Mounting Type | Bolted |
| Number of mounting bores | 2 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Thread Size | M12x1.25 |
| Paired article numbers | AST0085 |
Important compatibility info
| Type | Ball Joint |
| Manufacturer | HYUNDAI KIA |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Model | ACCENT RIO |
| Thread Size | M12x1.25 |
| Mounting Type | Bolted |
| Number of mounting bores | 2 |
| Diameter | 15 mm |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0115 |
Important compatibility info
| Function | Ball Joint |
| Steering arm type | for control arm |
| Type | Ball Joint |
| Model | CARAVELLE TRANSPORTER |
| Manufacturer | VOLKSWAGEN |
| Thread Size | M14x1.5 |
| Mounting Type | Bolted |
| Number of mounting bores | 2 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0119 |
Important compatibility info
| Type | Ball Joint |
| Diameter | 44 mm |
| Manufacturer | BMW |
| Model | X3 |
| Steering arm type | for control arm |
| Function | Ball Joint |
| Paired article numbers | AST0263 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Mounting Type | Bolted |
| Thread Size | M14x1.5 |
| Number of mounting bores | 2 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Mounting points diameter | 13.2 mm. 12.2 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Bore Diameter | 49 mm |
| Steering arm type | for control arm |
| Bore Diameter 1 | 14.4 mm |
| Bore Diameter 2 | 16.4 mm |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Paired article numbers | NST0351 |
Important compatibility info
| Type | Ball Joint |
| Function | Ball Joint |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Paired article numbers | NST0350 |
Important compatibility info
| Bore Diameter 1 | 12 mm |
| Steering arm type | for control arm |
| Number of Rivet Holes | 2 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.75 |
| Bore Diameter | 12.7 mm |
| Function | Ball Joint |
| Number of mounting bores | 2 |
| Mounting Type | Bolted |
| Type | Ball Joint |
Important compatibility info
| Width | 91.5 mm |
| Length | 97 mm |
| Paired article numbers | TC2692 |
| Function | Ball Joint |
| Thread Size | M12x1.5 |
| Height | 87 mm |
| Type | Ball Joint |
Important compatibility info
| Number of mounting bores | 4 |
| Mounting Type | Bolted |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Thread Size | M14x1.5 |
| Version | Fitting Kit |
| Bore Diameter 1 | 15.5 mm |
| Function | Ball Joint |
| Bore Diameter 2 | 17.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Bore Diameter 1 | 19.5 mm |
| Number of Rivet Holes | 4 |
| Version | Fitting Kit |
| Thread Measurement 1 | M18x1.5 |
| Bore Diameter | 12.5 mm |
| Number of mounting bores | 4 |
| Mounting Type | Bolted |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 2 | 22.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Version | Fitting Kit |
| Bore Diameter 1 | 20.7 mm |
| Thread Measurement 1 | M14x1.5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting Type | Pressed |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Bore Diameter 2 | 49 mm |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Cone Size | 18 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Replaces | 176068; 43030 |
| Steering arm type | for control arm |
| Additional Information | with attachment/mounting material |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 18 mm |
| Thread Size | Pinch Bolt 18mm |
| Function | Ball Joint |
| Type | Ball Joint |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Paired article numbers | NST0348 |
Important compatibility info
| Cone Size | 18 mm |
| Function | Ball Joint |
| Extra Description | Premium Kit+ |
| Type | Ball Joint |
| Number of mounting bores | 2 |
| Placement on Vehicle | Front Axle, Lower |
| Height | 81 mm |
| Width | 43 mm |
| Material | Steel |
Important compatibility info
| Thread Size | M12x1,25 |
| Cone Size | 13.8 mm |
| Function | Ball Joint |
| Extra Description | Premium Kit+ |
| Placement on Vehicle | Front Axle |
| Type | Ball Joint |
| Number of mounting bores | 3 |
| Additional Information 2 | with bolts |
Important compatibility info
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.75 |
| Bore Diameter | 10.7 mm |
| Function | Ball Joint |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Bore Diameter 1 | 15.1 mm |
| Steering arm type | for control arm |
| Bore Diameter 2 | 19.5 mm |
Important compatibility info
| Placement on Vehicle | Front Axle, Lower |
| Type | Ball Joint |
| Function | Ball Joint |
| Net weight | 0.74 kg |
Important compatibility info
| Number of mounting bores | 3 |
| Function | Ball Joint |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M16x1.5 |
| Bore Diameter 1 | 16 mm |
| Mounting Type | Bolted |
| Bore Diameter 2 | 23.8 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | BBJ5724 |
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Cone Size | 15.7 mm |
| Thread Measurement 1 | M12x1.25 |
| Thread Size | M12x1.25 |
Important compatibility info
| Steering arm type | for control arm |
| Type | Ball Joint |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Model | LAGUNA |
| Manufacturer | RENAULT |
| Thread Size | M12x1.25 |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Paired article numbers | AST0223 |
Important compatibility info
| Thread Size | M14x1.5 |
| Steering arm type | for control arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Model | DISCOVERY Mk2 |
| Manufacturer | LAND ROVER RANGE ROVER |
| Mounting Type | Pressed |
| Paired article numbers | AST0190 |
Important compatibility info
| Steering arm type | for control arm |
| Bore Diameter 2 | 22.4 mm |
| Version | Fitting Kit |
| Thread Size | M18x1.5 |
| Bore Diameter | 48.2 mm |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Bore Diameter 1 | 20 mm |
Important compatibility info
| Version | Fitting Kit |
| Bore Diameter | 48.2 mm |
| Thread Size | M18x1.5 |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Bore Diameter 2 | 22.4 mm |
| Bore Diameter 1 | 20 mm |
Important compatibility info
| Diameter | 16 mm |
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Bore Diameter 1 | 10.5 mm |
| Function | Ball Joint |
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Steering arm type | for control arm |
| Bore Diameter 2 | 27 mm |
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Thread Measurement 1 | M20x1.5 |
| Bore Diameter 1 | 22 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Bore Diameter | 45.3 mm |
Important compatibility info
| Number of mounting bores | 3 |
| Function | Ball Joint |
| Diameter 1 | 16.5 mm |
| Diameter 2 | 17.5 mm |
| Type | Ball Joint |
| Cone Size | 16.5 mm |
| Placement on Vehicle | Front Axle, Lower |
Important compatibility info
| Bore Diameter 2 | 27 mm |
| Version | Fitting Kit |
| Thread Measurement 1 | M20x1.5 |
| Bore Diameter | 45.3 mm |
| Function | Ball Joint |
| Bore Diameter 1 | 22 mm |
| Type | Ball Joint |
| Mounting Type | Pressed |
| Steering arm type | for control arm |
Important compatibility info
| Cone Size | 21.8 mm |
| Mounting points diameter | 10.3 mm |
| Additional Information | with attachment/mounting material |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M20 x 1,5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Lower |
| Function | Ball Joint |
| Extra Description | Premium Kit+ |
| Type | Ball Joint |
| Cone Size | 14 mm |
| Thread Size | M12x1.25 |
Important compatibility info
| Type | Ball Joint |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Cone Size | 17 mm |
| Paired article numbers | NST0239 |
| Thread Size | M12x1.25 |
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Model | TOURNEO CONNECT TRANSIT TRANSIT CONNECT TRANSIT TOURNEO |
| Manufacturer | FORD |
| Thread Size | M20x1.5 |
| Mounting Type | Bolted |
| Number of mounting bores | 2 |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Paired article numbers | AST0122 |
Important compatibility info
| Steering arm type | for control arm |
| Number of mounting bores | 4 |
| Version | Fitting Kit |
| Thread Size | M14x1.5 |
| Bore Diameter 1 | 15.5 mm |
| Bore Diameter 2 | 17.5 mm |
| Function | Ball Joint |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
| Width | 68 mm |
| Function | Ball Joint |
| Thread Size | Pinch Bolt 16.5mm |
| Type | Ball Joint |
| Height | 62 mm |
| Length | 133 mm |
Important compatibility info
| Mounting Type | Bolted |
| Function | Ball Joint |
| Thread Size | M14x1.5 |
| Steering arm type | for control arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Number of mounting bores | 3 |
| Type | Ball Joint |
| Paired article numbers | NST0030 |
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
Important compatibility info
| Paired article numbers | AST0350 |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
Important compatibility info
| Steering arm type | for control arm |
| Diameter | 20 mm |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Thread Size | M18x1.5 |
| Mounting Type | Bolted |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Number of mounting bores | 4 |
| Type | Ball Joint |
| Paired article numbers | NST0058 |
Important compatibility info
| Function | Ball Joint |
| Thread Size | Pinch Bolt 20mm |
| Cone Size | 20 mm |
| Type | Ball Joint |
Important compatibility info
| Function | Ball Joint |
| Thread Size | M12x1.5 |
| Width | 80 mm |
| Height | 55 mm |
| Length | 90 mm |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle, outer, Lower |
Important compatibility info
| Function | Ball Joint |
| Thread Size | M14x1.5 |
| Width | 100 mm |
| Height | 85 mm |
| Length | 95 mm |
| Type | Ball Joint |
Important compatibility info
| Width | 78 mm |
| Cone Size | 16.5 mm |
| Height | 80 mm |
| Material | Steel |
| Function | Ball Joint |
| Thread Size | M12x1,5 |
| Extra Description | Premium Kit+ |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle, Lower |
| Number of mounting bores | 3 |
Important compatibility info
| Thread Size | Pinch Bolt 18mm |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle |
| Cone Size | 18 mm |
| Type | Ball Joint |
Important compatibility info
| Steering arm type | for control arm |
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 49 mm |
| Bore Diameter 2 | 16.4 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Bore Diameter 1 | 14.4 mm |
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Thread Size | M14x1.5 |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Mounting Type | Pressed |
| Type | Ball Joint |
| Paired article numbers | NST0233 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































