Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 17 mm |
| Outer diameter 1 | 50 mm |
| Width 1 | 15 mm |
| Outer diameter 2 | 40 mm |
| Width 2 | 15 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 0 |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 333 mm |
| Thread Measurement 1 | M14X1.4 |
| Function | Inner Tie Rod |
| Axle Joint Length | 333 mm |
| Axle Joint Thread Type | with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Thread Measurement 1 | M12x1.5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Inner diameter | 20 mm |
| Diameter | 43 mm |
| Length | 48 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6638 |
| Placement on Vehicle | Rear Axle, Left, Right, outer, Upper |
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Inner diameter 1 | 34 mm |
| Colour | Black |
| Inner diameter 2 | 34 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Length | 500 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Type | Brake Hose |
| Additional Information | with banjo fitting |
| Thread Type | with internal thread |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Thread Size | M10x1 |
| Thread Measurement 1 | M10x1 |
| Length | 527 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with internal thread, with external thread |
Important compatibility info
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.5 |
| Bore Diameter | 39.8 mm |
| Function | Ball Joint |
| Bore Diameter 1 | 14.5 mm |
| Bore Diameter 2 | 18 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Length 1 | 1590 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
| Type | Cable Pull, parking brake |
Important compatibility info
| Function | Coolant Flange |
| for OE number | 03L 121 132 AA |
| Type | Coolant Flange |
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thread Measurement 2 | M10x1.25 |
| Thread Size | M10x1.25 |
| Length | 60 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7582 |
| Placement on Vehicle | Rear Axle Left |
Important compatibility info
| Required quantity | 1 |
| Function | Warning Contact, brake pad wear |
| Length | 1209 mm |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle |
| Replaces | BWL3045 |
Important compatibility info
| Length | 322 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
| Type | Accessory Kit, brake shoes |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
| Length | 80 mm |
| Inner diameter 2 | 62 mm |
| Inner diameter 1 | 20 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
| Lubrication | with grease lubrication |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 145 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Function | Filter, cabin air |
| Length 2 | 78 mm |
| Length 1 | 298 mm |
| Width | 188 mm |
| Height | 30 mm |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
Important compatibility info
| Diameter | 16 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Mounting, stabiliser bar |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
| Length | 103 mm |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 23 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Length | 222 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Size | M10x1 |
| Thread Type | with internal thread |
| Additional Information | with banjo fitting |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Additional Information 2 | with banjo bolt |
| Mounting Bolt Thread Size | M12x1 |
Important compatibility info
| Length | 346 mm |
| Placement on Vehicle | Rear Axle Left |
| Function | Brake Hose |
| Thread Type | with internal thread |
| Type | Brake Hose |
Important compatibility info
| Length | 346 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Extra Description | Trilobe |
| Inner diameter 2 | 65 mm |
| Length | 104 mm |
| Inner diameter 1 | 23 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with internal thread |
| Axle Joint Length | 319 mm |
| Thread Measurement 2 | M16X1.5 |
| Length | 319 mm |
| Thread Measurement 1 | M16X1.5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Important compatibility info
Important compatibility info
| Placement on Vehicle | Front Axle |
| Bearing Code | Gen 1 |
| Inner diameter 1 | 34 mm |
| Outer diameter 1 | 64 mm |
| Width 1 | 37 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Important compatibility info
| Number of Rivet Holes | 3 |
| Version | Fitting Kit |
| Thread Measurement 1 | M12x1.25 |
| Bore Diameter 1 | 17.2 mm |
| Bore Diameter 2 | 21.8 mm |
| Function | Ball Joint |
| Number of mounting bores | 3 |
| Mounting Type | Bolted |
| Type | Ball Joint |
| Steering arm type | for control arm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023




























