Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Bore Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Aluminium |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
| for OE number | SH02-12-610A |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 165 mm |
| Outer diameter | 85 mm |
| Mounting points diameter | 21 mm |
| Function | Repair Kit, control/trailing arm |
| Steering arm type | for trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
| Type | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| for OE number | 274019 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 179949 |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (34384)
- 1x Febi Tie Rod End (38865)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 179951 |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (34384)
- 1x Febi Tie Rod End (38866)
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| for OE number | 03 44 537 S2 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (27352)
- 1x Febi Rolling Bearing, suspension strut support mount (27996)
- 1x Febi Rubber Buffer, suspension (27847)
- 3x Febi Screw (27358)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188443)
- 2x Febi Protective Cap/Bellow, shock absorber (192650)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 426 mm |
| Thread Length | 37 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (106212)
- 1x Febi Tie Rod End (100775)
Important compatibility info
| Outer diameter | 100 mm. 80 mm |
| Function | Bellow, air suspension |
| Length 4 | 210 mm |
| Type | Bellow, air suspension |
| Height 1 | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Material | Metal |
| Width of castor bearing surface | 23 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
| Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 11 mm |
| Additional Information | with holder |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bracket, stabiliser mounting (40415)
- 2x Febi Mounting, stabiliser bar (45856)
- 4x Febi Bolt, control arm (43586)
Important compatibility info
| Thickness/Strength 1 | 20.4 mm. 19.6 mm |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with piston clip |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 193.2 mm |
| Width | 79.2 mm |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 93 mm |
| Thickness | 63 mm |
| Inner diameter | 10 mm |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with headlight flasher, with high beam function, with park light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hose Length | 215 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 57 mm |
| Function | Radiator Hose |
| Colour | Black |
| Additional Information 2 | with clamps |
| Extra Description | ProKit |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
| for OE number | 1 511 620 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (39322)
- 1x Febi Hose Clamp (48355)
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Hose, steering |
| Length | 270 mm |
| Type | Hydraulic Hose, steering |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Knock Sensor |
| Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















