Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Replaces | 0445110170 |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Replaces | 0445110170 |
Important compatibility info
| Extra Description | Basic Short Kit |
| for OE number | 12675634 S1 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (106695)
- 1x Febi Guide, timing chain (106687)
- 1x Febi Guide, timing chain (106632)
- 1x Febi Guide, timing chain (106640)
Important compatibility info
| Extra Description | Basic Short Kit |
| for OE number | 12675634 S1 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (106695)
- 1x Febi Guide, timing chain (106687)
- 1x Febi Guide, timing chain (106632)
- 1x Febi Guide, timing chain (106640)
Important compatibility info
| Mounting points diameter | 24.3 mm. 38 mm |
| Length | 667 mm |
| Function | Tilt Cylinder, driver cab |
| Type | Tilt Cylinder, driver cab |
| Extra Description | febi Plus |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Stroke | 458 mm |
| Number of Connectors / Ports | 2 |
| Outer diameter | 68 mm. 53 mm |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 24.3 mm. 38 mm |
| Length | 667 mm |
| Function | Tilt Cylinder, driver cab |
| Type | Tilt Cylinder, driver cab |
| Extra Description | febi Plus |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Stroke | 458 mm |
| Number of Connectors / Ports | 2 |
| Outer diameter | 68 mm. 53 mm |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Quality | OE |
| Vehicle Main Current | for vehicles with 12V main current |
| Gross Weight | 5490 g |
| Function | Alternator |
| Type | Alternator |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 58 mm |
| Number of Ribs | 6 |
| Pulleys | with multi-belt pulley |
| Voltage | 14 V |
Important compatibility info
| Quality | OE |
| Vehicle Main Current | for vehicles with 12V main current |
| Gross Weight | 5490 g |
| Function | Alternator |
| Type | Alternator |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 58 mm |
| Number of Ribs | 6 |
| Pulleys | with multi-belt pulley |
| Voltage | 14 V |
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Manufacturer Restriction | IHI |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | TurboFit |
Important compatibility info
| Guarantee | 2 years guarantee |
| Product met | Euro 2 |
| Includes fitting kit | FK90233B |
| To be used with part number(s) | FK90233 |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Guarantee | 2 years guarantee |
| Product met | Euro 2 |
| Includes fitting kit | FK90233B |
| To be used with part number(s) | FK90233 |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Material | Ceramic |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Voltage | 12 V |
| Number of Poles | 4 -pin connector |
| Diameter 1 | 353 mm |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 150/100 W |
| Diameter 2 | 355 mm |
| Connector Shape | oval |
| Heating / Cooling | Double Fan |
| Number of Fan Blades | 5 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Voltage | 12 V |
| Number of Poles | 4 -pin connector |
| Diameter 1 | 353 mm |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 150/100 W |
| Diameter 2 | 355 mm |
| Connector Shape | oval |
| Heating / Cooling | Double Fan |
| Number of Fan Blades | 5 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 29 mm |
| Clamp | B1+(M8),L,DFM |
| Fastening Type | Direct fastening |
| Number of grooves | 6 |
| Belt Pulley Diameter | 56 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL61 |
| Length | 180 mm |
| Function | Alternator |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 29 mm |
| Clamp | B1+(M8),L,DFM |
| Fastening Type | Direct fastening |
| Number of grooves | 6 |
| Belt Pulley Diameter | 56 mm |
| Rotation Direction | Clockwise rotation |
| Plug Type ID | PL61 |
| Length | 180 mm |
| Function | Alternator |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Net weight | 0.900 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| for OE number | 13278480 |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Placement on Vehicle | in fuel tank |
| Weight | 1.290 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Net weight | 0.900 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| for OE number | 13278480 |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Placement on Vehicle | in fuel tank |
| Weight | 1.290 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Number of grooves | 6 |
| Number of Ribs | 6 |
| Compressor Oil | PAG 46 |
| Packaging width | 27.50 cm |
| Packaging height | 21.00 cm |
| Extra Description | BEHR |
| Net Weight | 5466 g |
| Port / Connector type | Top/PAD |
| Type | Compressor, air conditioning |
| Capacity Compressor | 160 cm³ |
| Outlet Diameter | 15.3 mm |
| Inlet Diameter | 28 mm |
| Pulleys | with V-ribbed belt pulley |
| Additional Information 2 | with seal ring |
| Voltage | 12 V |
| Belt Pulley Diameter | 110 mm |
| Compressor ID | 7SEU16C/PXE16/DCS17E |
| Refrigerant | R 1234yf, R 134a |
| Packaging length | 18.5 cm |
| Manufacturer Restriction | Denso/Sanden/Valeo |
| Function | Compressor, air conditioning |
| Replaces | ACP6000P |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
Important compatibility info
| Number of grooves | 6 |
| Number of Ribs | 6 |
| Compressor Oil | PAG 46 |
| Packaging width | 27.50 cm |
| Packaging height | 21.00 cm |
| Extra Description | BEHR |
| Net Weight | 5466 g |
| Port / Connector type | Top/PAD |
| Type | Compressor, air conditioning |
| Capacity Compressor | 160 cm³ |
| Outlet Diameter | 15.3 mm |
| Inlet Diameter | 28 mm |
| Pulleys | with V-ribbed belt pulley |
| Additional Information 2 | with seal ring |
| Voltage | 12 V |
| Belt Pulley Diameter | 110 mm |
| Compressor ID | 7SEU16C/PXE16/DCS17E |
| Refrigerant | R 1234yf, R 134a |
| Packaging length | 18.5 cm |
| Manufacturer Restriction | Denso/Sanden/Valeo |
| Function | Compressor, air conditioning |
| Replaces | ACP6000P |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Function | Clutch Kit |
| Multi-piece | Two-piece |
| for OE number | 23354-00QAH |
| Additional Information | with synthetic grease |
| Outer diameter | 252 mm |
| Number of Teeth | 21 |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Kit |
| Multi-piece | Two-piece |
| for OE number | 23354-00QAH |
| Additional Information | with synthetic grease |
| Outer diameter | 252 mm |
| Number of Teeth | 21 |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump |
| Water pump impeller material | Plastic |
| Number of Wings | 8 |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | switchable water pump |
| Water pump impeller material | Plastic |
| Number of Wings | 8 |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
Important compatibility info
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Extra Description | FleetRunner™ Micro-V® |
Additional Information
- 1x Gates V-Ribbed Belt (10PK2200HD)
- 1x Gates Belt Tensioner, v-ribbed belt (T38727)
- 2x Gates Deflection/Guide Pulley, v-ribbed belt (T36530)
Important compatibility info
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Extra Description | FleetRunner™ Micro-V® |
Additional Information
- 1x Gates V-Ribbed Belt (10PK2200HD)
- 1x Gates Belt Tensioner, v-ribbed belt (T38727)
- 2x Gates Deflection/Guide Pulley, v-ribbed belt (T36530)
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Replaces | 415036310 |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Replaces | 415036310 |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Length | 590 mm |
| Function | Drive Shaft |
| ABS Ring Diameter | 88 mm |
| Number of Teeth, ABS ring | 52 |
| External Teeth, Diff.Side | 28 |
| External Teeth, Wheel Side | 30 |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length | 590 mm |
| Function | Drive Shaft |
| ABS Ring Diameter | 88 mm |
| Number of Teeth, ABS ring | 52 |
| External Teeth, Diff.Side | 28 |
| External Teeth, Wheel Side | 30 |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Function | Window Regulator |
| Voltage | 12 V |
| Type | Window Regulator |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Additional Information | with electric motor |
Important compatibility info
| Function | Window Regulator |
| Voltage | 12 V |
| Type | Window Regulator |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Additional Information | with electric motor |
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 170 A |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 49 mm |
| Voltage | 14 V |
| Quality | OE |
| Function | Alternator |
| Number of Ribs | 6 |
| Vehicle Main Current | for vehicles with 12V main current |
| Gross Weight | 7890 g |
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 170 A |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 49 mm |
| Voltage | 14 V |
| Quality | OE |
| Function | Alternator |
| Number of Ribs | 6 |
| Vehicle Main Current | for vehicles with 12V main current |
| Gross Weight | 7890 g |
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003810)
- 1x LuK Clutch Kit (624326319)
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003810)
- 1x LuK Clutch Kit (624326319)
Important compatibility info
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Diameter | 240 mm |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124081210)
- 1x LuK Clutch Disc (324086210)
Important compatibility info
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Diameter | 240 mm |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124081210)
- 1x LuK Clutch Disc (324086210)
Important compatibility info
| Additional Information 2 | with seal ring |
| Voltage | 12 V |
| Pulleys | with V-ribbed belt pulley |
| Belt Pulley Diameter | 110 mm |
| Inlet Diameter | 28.4 mm |
| Outlet Diameter | 15.3 mm |
| Connector Shape | oval |
| Refrigerant | R 1234yf, R 134a |
| Compressor ID | 6SAS14C |
| Compressor Oil | PAG 46 YF |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO-EQUIVALENT |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Additional Information 2 | with seal ring |
| Voltage | 12 V |
| Pulleys | with V-ribbed belt pulley |
| Belt Pulley Diameter | 110 mm |
| Inlet Diameter | 28.4 mm |
| Outlet Diameter | 15.3 mm |
| Connector Shape | oval |
| Refrigerant | R 1234yf, R 134a |
| Compressor ID | 6SAS14C |
| Compressor Oil | PAG 46 YF |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO-EQUIVALENT |
| Function | Compressor, air conditioning |
| Extra Description | EASY FIT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Alternator Charge Current | 100 A |
| Gross Weight | 5720 g |
| Function | Alternator |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 4 |
| Voltage | 14 V |
| Quality | OE |
| Type | Alternator |
| Vehicle Main Current | for vehicles with 12V main current |
| Belt Pulley Diameter | 63 mm |
Important compatibility info
| Alternator Charge Current | 100 A |
| Gross Weight | 5720 g |
| Function | Alternator |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 4 |
| Voltage | 14 V |
| Quality | OE |
| Type | Alternator |
| Vehicle Main Current | for vehicles with 12V main current |
| Belt Pulley Diameter | 63 mm |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Denso |
| Type | Alternator |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 180 A |
| Number of Ribs | 6 |
Important compatibility info
| Function | Alternator |
| Manufacturer Restriction | Denso |
| Type | Alternator |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 180 A |
| Number of Ribs | 6 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023























