Important compatibility info
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
| Inner diameter | 53 mm |
| Outer diameter | 106 mm |
| Material | Plastic |
| Height | 38 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 106 mm |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 79 mm |
| Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184376)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (01543)
- 2x Febi Bush, kingpin (01544)
- 2x Febi Lock Ring, steering knuckle (01551)
- 2x Febi Seal Ring, steering knuckle (01552)
Important compatibility info
| Length | 201 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (34039)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 50 mm |
| Width | 25 mm |
| Material | Plastic |
| Inner diameter | 10 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Placement on Vehicle | Front |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 137.1 mm |
| Width | 53.9 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm. 155.2 mm |
| Width | 71.5 mm. 69 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| for OE number | 77365396 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 51983866 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 2 214 444 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 640 mm |
| Paired article numbers | 24609 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Hole Spacing | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Paired article numbers | 175444 |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Extra Description | febi Plus |
| Function | Pressure Converter, exhaust control |
| Type | Pressure Converter, exhaust control |
| for OE number | 1K0 906 627 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 190 mm |
| Thickness | 13 mm |
| Inner diameter | 160 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Thickness | 85 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 19 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 93 mm |
| Function | Coolant Filter |
| Height | 133.51 mm |
| Type | Coolant Filter |
| Extra Description | febi Plus |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















