Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please only use the contents of this kit for the following repair!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Camshaft Adjuster (45084)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Bolt, camshaft gear (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Shaft Seal, crankshaft (32471)
- 1x Febi Gear/Sprocket, camshaft (105997)
- 1x Febi Sprocket, crankshaft (106144)
- 1x Febi Gasket, timing case cover (102422)
- 1x Febi Pulley Bolt (106509)
- 2x Febi Gasket, timing case (106575)
- 1x Febi Seal Ring, timing chain tensioner (171597)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 380 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 120 mm |
| Bolt Hole Circle Diameter | 335 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 380 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 120 mm |
| Bolt Hole Circle Diameter | 335 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 7 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 86 mm |
| Type | Alternator |
| Function | Alternator |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 7 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 86 mm |
| Type | Alternator |
| Function | Alternator |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pulleys | with belt pulley, for v-ribbed belt pulley |
| Function | Water Pump, engine cooling |
| Extra Description | FleetRunner™ |
| Type | Water Pump, engine cooling |
| Material | Metal |
| Additional Information | with gaskets/seals |
Important compatibility info
| Pulleys | with belt pulley, for v-ribbed belt pulley |
| Function | Water Pump, engine cooling |
| Extra Description | FleetRunner™ |
| Type | Water Pump, engine cooling |
| Material | Metal |
| Additional Information | with gaskets/seals |
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Metal |
| Pulleys | without belt pulley, for v-ribbed belt pulley |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Extra Description | FleetRunner™ |
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Metal |
| Pulleys | without belt pulley, for v-ribbed belt pulley |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Extra Description | FleetRunner™ |
Important compatibility info
| Number of Teeth | 21 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Hub Profile | 24,1 |
| Friction Lining Outer Diameter | 228 mm |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
Important compatibility info
| Number of Teeth | 21 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Hub Profile | 24,1 |
| Friction Lining Outer Diameter | 228 mm |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
Important compatibility info
| Additional Information | with flywheel screws |
| Outer diameter | 240 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | Dual-mass flywheel |
| Replaces | 2294701026 |
Important compatibility info
| Additional Information | with flywheel screws |
| Outer diameter | 240 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | Dual-mass flywheel |
| Replaces | 2294701026 |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 680 mm |
| Inner Length | 61.5 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 27 |
| Number of Teeth, ABS ring | 46 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Replaces | HY201L |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 680 mm |
| Inner Length | 61.5 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 27 |
| Number of Teeth, ABS ring | 46 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Replaces | HY201L |
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | ADH28670 |
| Placement on Vehicle | Front Axle Left, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | ADH28670 |
| Placement on Vehicle | Front Axle Left, Upper |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Extra Description | Approved |
| Product met | Euro 3 |
| Type | Catalytic Converter |
| To be used with part number(s) | FK80224 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Extra Description | Approved |
| Product met | Euro 3 |
| Type | Catalytic Converter |
| To be used with part number(s) | FK80224 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91071 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK91071 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 132 mm |
| Impeller Diameter | 125 mm |
| Type | Water Pump, engine cooling |
| Height | 118 mm |
| Number of Holes | 9 |
| Number of Seals | 5 |
| Number of Wings | 12 |
Important compatibility info
| Placement on Vehicle | Rear |
| Shock Absorber Mounting Type | Top yoke, Bottom Yoke |
| Packaging height | 18.5 cm |
| Packaging length | 38 cm |
| Braking / Drive Dynamics | for vehicles with Airmatic DC |
| Spring Type | for vehicles with air suspension |
| Function | Air Spring, suspension |
| Net weight | 1.7 kg |
| Manufactured in | Hungary |
| Packaging width | 18.5 cm |
| Weight | 2 kg |
| Type | Air Spring, suspension |
Important compatibility info
| Placement on Vehicle | Rear |
| Shock Absorber Mounting Type | Top yoke, Bottom Yoke |
| Packaging height | 18.5 cm |
| Packaging length | 38 cm |
| Braking / Drive Dynamics | for vehicles with Airmatic DC |
| Spring Type | for vehicles with air suspension |
| Function | Air Spring, suspension |
| Net weight | 1.7 kg |
| Manufactured in | Hungary |
| Packaging width | 18.5 cm |
| Weight | 2 kg |
| Type | Air Spring, suspension |
Important compatibility info
| Function | Clutch Pressure Plate |
| Replaces | ADC43242N |
| Type | Clutch Pressure Plate |
| Outer diameter | 303 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Pressure Plate |
| Replaces | ADC43242N |
| Type | Clutch Pressure Plate |
| Outer diameter | 303 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 12 |
| Rated Power | 5.5 kW |
| Type | Starter |
| Function | Starter |
| for OE number | 2 708 317 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 12 |
| Rated Power | 5.5 kW |
| Type | Starter |
| Function | Starter |
| for OE number | 2 708 317 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rear Muffler |
| Length | 1000 mm |
| Height | 230 mm |
| Width | 300 mm |
| Weight | 8 kg |
| Type | Rear Muffler |
Important compatibility info
| Function | Rear Muffler |
| Length | 1000 mm |
| Height | 230 mm |
| Width | 300 mm |
| Weight | 8 kg |
| Type | Rear Muffler |
Important compatibility info
| Alternator type | excl. vacuum pump |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator Charge Current | 100 A |
| Pulleys | without belt pulley |
| Fastening Type | Single pivoted lever |
| Rotation Direction | Clockwise rotation |
| Length | 210 mm |
| Function | Alternator |
| Voltage | 28 V |
| Type | Alternator |
Important compatibility info
| Alternator type | excl. vacuum pump |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator Charge Current | 100 A |
| Pulleys | without belt pulley |
| Fastening Type | Single pivoted lever |
| Rotation Direction | Clockwise rotation |
| Length | 210 mm |
| Function | Alternator |
| Voltage | 28 V |
| Type | Alternator |
Important compatibility info
| Gross Weight | 0.611 kg |
| Type | Injector |
| Function | Injector |
| for OE number | 504088755 |
Important compatibility info
| Gross Weight | 0.611 kg |
| Type | Injector |
| Function | Injector |
| for OE number | 504088755 |
Important compatibility info
| Gross Weight | 0.541 kg |
| for OE number | 1633633 |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Gross Weight | 0.541 kg |
| for OE number | 1633633 |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Function | Injector |
| for OE number | 6C1Q-9K546-BB |
| Type | Injector |
| Quality | OE Reman |
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Manufacturer Restriction | DENSO |
Important compatibility info
| Function | Injector |
| for OE number | 6C1Q-9K546-BB |
| Type | Injector |
| Quality | OE Reman |
| Fuel Type | Diesel |
| Injection System | Common Rail |
| Manufacturer Restriction | DENSO |
Important compatibility info
| Extra Description | febi Plus |
| Housing Diameter | 36 mm |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Type | Gas Spring, boot/cargo area |
| Stroke | 200 mm |
| Length | 697 mm |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Housing Diameter | 36 mm |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Type | Gas Spring, boot/cargo area |
| Stroke | 200 mm |
| Length | 697 mm |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
| Net weight | 0.668 kg |
Important compatibility info
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
| Net weight | 0.668 kg |
Important compatibility info
| Net weight | 0.758 kg |
| Extra Description | Kerr Nelson |
| Function | Throttle body |
| for OE number | 03G128063S |
| Mounting Type | Screw Connection |
| Connector Shape | Oval |
| Housing Colour | Black |
| Inlet Diameter | 48 mm |
| Number of Poles | 3 -pin connector |
| Type | Throttle body |
Important compatibility info
| Net weight | 0.758 kg |
| Extra Description | Kerr Nelson |
| Function | Throttle body |
| for OE number | 03G128063S |
| Mounting Type | Screw Connection |
| Connector Shape | Oval |
| Housing Colour | Black |
| Inlet Diameter | 48 mm |
| Number of Poles | 3 -pin connector |
| Type | Throttle body |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 124 mm |
| for OE number | 57100 4H000 |
| Number of grooves | 7 |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 124 mm |
| for OE number | 57100 4H000 |
| Number of grooves | 7 |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | ZF |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | ZF |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
Important compatibility info
| Net weight | 0.884 kg |
| Function | EGR Valve |
| Type | EGR Valve |
| Material | Metal |
| Operating Mode | Pneumatic |
| Additional Information | without gasket/seal |
| Weight | 1.020 kg |
| Extra Description | Lucas Premium Blade |
| Manufacturer Restriction | Pierburg |
Important compatibility info
| Net weight | 0.884 kg |
| Function | EGR Valve |
| Type | EGR Valve |
| Material | Metal |
| Operating Mode | Pneumatic |
| Additional Information | without gasket/seal |
| Weight | 1.020 kg |
| Extra Description | Lucas Premium Blade |
| Manufacturer Restriction | Pierburg |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























