Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 180 A |
| for OE number | 104210-6730 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 180 A |
| for OE number | 104210-6730 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Trickle Charge | Maintains |
| Other Part Number | TM484 |
| Charging Voltage | 12 V |
| Charge Rate | 0.8 A |
| Lithium Charge Capacity (up to) | 1 Ah - 10 Ah |
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 22 |
| Additional Information | with synthetic grease |
| Outer diameter | 231 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 22 |
| Additional Information | with synthetic grease |
| Outer diameter | 231 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hub Profile | 21.9x24.2 |
| Number of Teeth | 23 |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
Important compatibility info
| Hub Profile | 21.9x24.2 |
| Number of Teeth | 23 |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
Important compatibility info
| Additional Information | with electric motor |
| Placement on Vehicle | Left Front |
| Voltage | 12 V |
| Number of Poles | 6 -pin connector |
| Operating Mode | Electric |
| Combi Switch Function | with comfort function |
| Type | Window Regulator |
| Function | Window Regulator |
Important compatibility info
| Additional Information | with electric motor |
| Placement on Vehicle | Left Front |
| Voltage | 12 V |
| Number of Poles | 6 -pin connector |
| Operating Mode | Electric |
| Combi Switch Function | with comfort function |
| Type | Window Regulator |
| Function | Window Regulator |
Important compatibility info
| Placement on Vehicle | Left |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Includes fitting kit | FK90834B |
| To be used with part number(s) | FK90834 |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | Left |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Includes fitting kit | FK90834B |
| To be used with part number(s) | FK90834 |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92161B |
| Placement on Vehicle | for cylinder 1-3 |
| To be used with part number(s) | FK92161 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92161B |
| Placement on Vehicle | for cylinder 1-3 |
| To be used with part number(s) | FK92161 |
| Material | Ceramic |
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 5.2 kg |
| Shock Absorber Mounting Type | Top yoke, Bottom eye |
| Packaging length | 63.5 cm |
| Packaging width | 18.5 cm |
| Shock Absorber Type | Oil Pressure |
| Vehicle Equipment | for vehicles without 3rd seating row |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Left |
| Suspension | for vehicles with standard suspension, for vehicles without electronic suspension control |
| Packaging height | 18.5 cm |
| Spring Type | for vehicles with coil spring suspension, for vehicles with air suspension |
| Function | Shock Absorber |
| Manufactured in | China |
| Net weight | 4.4 kg |
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 5.2 kg |
| Shock Absorber Mounting Type | Top yoke, Bottom eye |
| Packaging length | 63.5 cm |
| Packaging width | 18.5 cm |
| Shock Absorber Type | Oil Pressure |
| Vehicle Equipment | for vehicles without 3rd seating row |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Left |
| Suspension | for vehicles with standard suspension, for vehicles without electronic suspension control |
| Packaging height | 18.5 cm |
| Spring Type | for vehicles with coil spring suspension, for vehicles with air suspension |
| Function | Shock Absorber |
| Manufactured in | China |
| Net weight | 4.4 kg |
Important compatibility info
| Extra Description | Approved |
| Function | Catalytic Converter |
| Includes fitting kit | FK90733B |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Product met | Euro 2 |
| To be used with part number(s) | FK90733 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Function | Catalytic Converter |
| Includes fitting kit | FK90733B |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Product met | Euro 2 |
| To be used with part number(s) | FK90733 |
| Material | Ceramic |
Important compatibility info
| Width | 131 mm |
| Height | 45 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 18.4 mm |
| Number of Holes | 67 |
| Brake Disc Thickness | 20 mm |
| Brake Disc Type | internally vented |
| Height 1 | 53 mm |
| Surface | Coated |
| Function | Brake Kit, disc brake |
| Extra Description | BEYOND LINE - EV |
| Thickness | 14 mm |
| Outer diameter | 280 mm |
| Type | Brake Kit, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Centering Diameter | 5 mm |
| Height 2 | 65 mm |
| Machining | High-carbon |
| WVA Number | 23915, 23916 |
Additional Information
- 2x Brembo Brake Disc (09.D208.1E)
- 4x Brembo Brake Pad Set, disc brake (P06091E)
Important compatibility info
| Width | 131 mm |
| Height | 45 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 18.4 mm |
| Number of Holes | 67 |
| Brake Disc Thickness | 20 mm |
| Brake Disc Type | internally vented |
| Height 1 | 53 mm |
| Surface | Coated |
| Function | Brake Kit, disc brake |
| Extra Description | BEYOND LINE - EV |
| Thickness | 14 mm |
| Outer diameter | 280 mm |
| Type | Brake Kit, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Centering Diameter | 5 mm |
| Height 2 | 65 mm |
| Machining | High-carbon |
| WVA Number | 23915, 23916 |
Additional Information
- 2x Brembo Brake Disc (09.D208.1E)
- 4x Brembo Brake Pad Set, disc brake (P06091E)
Important compatibility info
| Net weight | 0.036 kg |
| Extra Description | Kerr Nelson |
| Function | Nozzle and Holder Assembly |
| Connector Shape | D-Shape |
| Housing Colour | Black |
| Colour | Blue |
| Number of Poles | 2 -pin connector |
| Weight | 0.150 kg |
| Type | Nozzle and Holder Assembly |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023










