Important compatibility info
| Height | 75 mm |
| Outer diameter | 86 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 36 |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M12 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 145 mm |
| Thickness | 98 mm |
| Spanner Size | 18 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Pipe |
| Cooling Hose | from thermostat to waterpump |
| Material | Plastic |
| Length | 342 mm |
| Extra Description | febi Plus |
| Type | Coolant Pipe |
| Additional Information 2 | with retaining strap, with clip, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clip (103137)
- 1x Febi Coolant Pipe (103136)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 2730 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2650 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 62.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip, with staples |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 105 mm |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51891028 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 175479 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Paired article numbers | 175478 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 139.5 mm |
| Placement on Vehicle | Front Axle |
| Function | Brake Pad Set, disc brake |
| Width | 55.4 mm |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.5 mm |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1484 mm |
| Paired article numbers | 193512 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Additional Information | with grease |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width | 32 mm |
| Inner diameter | 24 mm |
| Outer diameter | 53 mm |
| Material | Metal |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 289 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.3 mm |
| Type | Suspension Spring |
| Outer diameter | 146 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 95 mm |
| Height | 128 mm |
| Inner diameter | 23 mm |
| Filter type | Filter Insert |
| Additional Information 2 | with seal ring |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 3510 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 3400 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Number of Connectors / Ports | 2 |
| Length | 3725 mm |
| Additional Information | with bush |
| Resistance | 1150 Ohm |
| Cable Length | 3600 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 470 mm |
| Outer diameter | 152 mm |
| Inner diameter | 141 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 177194 |
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Cable Length | 1095 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















