Important compatibility info
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Extra Description | EASY FIT |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Heating / Cooling | Single Fan |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Heating / Cooling | Single Fan |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Extra Description | Non-approved |
| To be used with part number(s) | FK91496 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Extra Description | Non-approved |
| To be used with part number(s) | FK91496 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Extra Description | febi Plus |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 21 mm |
| Inner Brake Drum Diameter | 280 mm |
| Width | 64 mm |
| Additional Information | with wheel brake cylinder |
| Additional Information 2 | with mounting manual |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Piston Diameter | 21 mm |
| Inner Brake Drum Diameter | 280 mm |
| Width | 64 mm |
| Additional Information | with wheel brake cylinder |
| Additional Information 2 | with mounting manual |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| To be used with part number(s) | FK11087, PP11087A, PP11087B |
| Inspection Tag | E9-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Up to Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
Important compatibility info
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| To be used with part number(s) | FK11087, PP11087A, PP11087B |
| Inspection Tag | E9-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Up to Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
Important compatibility info
| Net weight | 0.534 kg |
| Extra Description | Fuel Parts |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Weight | 0.640 kg |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Net weight | 0.534 kg |
| Extra Description | Fuel Parts |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Weight | 0.640 kg |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Extra Description | Approved |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Up to Euro 4 |
| Includes fitting kit | FK11050A |
| Material | Cordierite |
| Inspection Tag | E9-103R |
| Product met | Euro 4 |
| To be used with part number(s) | FK11050 |
Important compatibility info
| Extra Description | Approved |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Up to Euro 4 |
| Includes fitting kit | FK11050A |
| Material | Cordierite |
| Inspection Tag | E9-103R |
| Product met | Euro 4 |
| To be used with part number(s) | FK11050 |
Important compatibility info
| Battery Type Code | YTX20-BS Compatible Lithium |
| Height | 130 mm |
| Terminal Layout | Positive Front Left |
| Width | 87 mm |
| Battery Capacity 10h (Ah) | 7 Ah |
| Cold Cranking Amperage (CCA) | 420 A |
| Type | Lithium |
| Terminal Type | Bike Box Terminal |
| Voltage | 12 V |
| Length | 175 mm |
| Warranty | 1 year warranty |
Important compatibility info
| Battery Type Code | YTX20-BS Compatible Lithium |
| Height | 130 mm |
| Terminal Layout | Positive Front Left |
| Width | 87 mm |
| Battery Capacity 10h (Ah) | 7 Ah |
| Cold Cranking Amperage (CCA) | 420 A |
| Type | Lithium |
| Terminal Type | Bike Box Terminal |
| Voltage | 12 V |
| Length | 175 mm |
| Warranty | 1 year warranty |
Important compatibility info
| Number of Poles | 4 -pin connector |
| Thread Size | M22 x 1.5 |
| Type | Particle Sensor |
| Net weight | 0.225 kg |
| Housing Colour | Black |
| Spanner Size | 24 |
| Weight | 0.27 kg |
| Cable Length | 650 mm |
| Connector Shape | oval |
| Function | Particle Sensor |
Important compatibility info
| Number of Poles | 4 -pin connector |
| Thread Size | M22 x 1.5 |
| Type | Particle Sensor |
| Net weight | 0.225 kg |
| Housing Colour | Black |
| Spanner Size | 24 |
| Weight | 0.27 kg |
| Cable Length | 650 mm |
| Connector Shape | oval |
| Function | Particle Sensor |
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 11 |
| Rated Power | 6.2 kW |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 11 |
| Rated Power | 6.2 kW |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 1.186 kg |
| Function | Fuel Feed Unit |
| Delivery Quantity | 160 l/h |
| Plug Type | Female |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 6 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 1.630 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Net weight | 1.186 kg |
| Function | Fuel Feed Unit |
| Delivery Quantity | 160 l/h |
| Plug Type | Female |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 6 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 1.630 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Extra Description | Approved |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| Inspection Tag | E9-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Up to Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11089, PP11089A, PP11089B |
Important compatibility info
| Extra Description | Approved |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| Inspection Tag | E9-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Up to Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11089, PP11089A, PP11089B |
Important compatibility info
| Weight | 0.210 kg |
| Net weight | 0.202 kg |
| Housing length | 100 mm |
| Function | Mass Air Flow Sensor |
| Housing Diameter | 80 mm |
| Housing Type | with housing |
| Connector Shape | D Shape |
| Number of Poles | 4 -pin connector |
| Additional Information 2 | without integrated air temperature sensor |
| Type | Mass Air Flow Sensor |
| Manufacturer Restriction | Bosch |
Important compatibility info
| Weight | 0.210 kg |
| Net weight | 0.202 kg |
| Housing length | 100 mm |
| Function | Mass Air Flow Sensor |
| Housing Diameter | 80 mm |
| Housing Type | with housing |
| Connector Shape | D Shape |
| Number of Poles | 4 -pin connector |
| Additional Information 2 | without integrated air temperature sensor |
| Type | Mass Air Flow Sensor |
| Manufacturer Restriction | Bosch |
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | without thrust ring |
| Outer diameter | 362 mm |
| Type | Flywheel |
| Function | Flywheel |
| Flywheel Profile | with sprocket |
Important compatibility info
| Additional Information | without thrust ring |
| Outer diameter | 362 mm |
| Type | Flywheel |
| Function | Flywheel |
| Flywheel Profile | with sprocket |
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Piston Diameter | 16 mm |
| Max. Length | 872 mm |
| Min. Length | 522 mm |
| Placement on Vehicle | Rear Axle, non-steered leading axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Piston Diameter | 16 mm |
| Max. Length | 872 mm |
| Min. Length | 522 mm |
| Placement on Vehicle | Rear Axle, non-steered leading axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK90372 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK90372 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Includes fitting kit | FK11112A |
| Labels & Certifications | Up to Euro 4 |
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Material | Cordierite |
| To be used with part number(s) | FK11112 |
Important compatibility info
| Includes fitting kit | FK11112A |
| Labels & Certifications | Up to Euro 4 |
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Material | Cordierite |
| To be used with part number(s) | FK11112 |
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Additional Information | with electric motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Additional Information | with electric motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK92814 |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Placement on Vehicle | Rear |
| Function | Catalytic Converter |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK92814 |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Placement on Vehicle | Rear |
| Function | Catalytic Converter |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Compressor ID | SD7V16 |
| Compressor Oil | PAG 46 |
| Belt Pulley Diameter | 119 mm |
| Refrigerant | R 134a |
| Function | Compressor, air conditioning |
| Net Weight | 5925 g |
| Port / Connector type | H/PAD |
| Pulleys | with V-ribbed belt pulley |
| Manufacturer Restriction | Sanden |
| Additional Information 2 | with adapter, with seal ring |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Cylinder Head ID (Compressor) | VQL / VQS |
| Type | Compressor, air conditioning |
| Extra Description | BEHR |
| Number of grooves | 6 |
| Packaging width | 27.50 cm |
| Packaging length | 18.5 cm |
| Packaging height | 21.00 cm |
| Additional Information | with cable set |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
Important compatibility info
| Compressor ID | SD7V16 |
| Compressor Oil | PAG 46 |
| Belt Pulley Diameter | 119 mm |
| Refrigerant | R 134a |
| Function | Compressor, air conditioning |
| Net Weight | 5925 g |
| Port / Connector type | H/PAD |
| Pulleys | with V-ribbed belt pulley |
| Manufacturer Restriction | Sanden |
| Additional Information 2 | with adapter, with seal ring |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Cylinder Head ID (Compressor) | VQL / VQS |
| Type | Compressor, air conditioning |
| Extra Description | BEHR |
| Number of grooves | 6 |
| Packaging width | 27.50 cm |
| Packaging length | 18.5 cm |
| Packaging height | 21.00 cm |
| Additional Information | with cable set |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
Important compatibility info
| Type | Catalytic Converter |
| To be used with part number(s) | FK90280 |
| Includes fitting kit | FK90280B |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Inspection Tag | E9-103R |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Type | Catalytic Converter |
| To be used with part number(s) | FK90280 |
| Includes fitting kit | FK90280B |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Inspection Tag | E9-103R |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E57-103R |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Product met | Euro 4 |
| To be used with part number(s) | FK91383 |
| Material | Ceramic |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























