Proud to be a UK-based company
Contact us
Important compatibility info
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm, Control Arm |
| Cone Size | 42 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 564 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 58 mm |
| Mounting points diameter | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information 2 | with seal ring |
| Number of grooves | 12 |
| Type | Water Pump, engine cooling |
| Seal Material | Rubber |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Belt Pulley Diameter | 60 mm |
| Alternator Charge Current | 70 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Number of Ribs | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 59 mm |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Valve type | Solenoid Valve |
| Type | EGR valve, exhaust control |
| Function | EGR valve, exhaust control |
| Internal Thread Size | M10 x 1, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 34 |
| Min. Length | 976 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 74.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Pulleys | with belt pulley |
| Number of Ribs | 2 |
| Belt Pulley Diameter | 74 mm |
| Alternator Charge Current | 120 A |
| Type | Alternator |
| Voltage | 12 V |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.20
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Alternator Charge Current | 100 A |
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.20
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 60 mm |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.20
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with brake fluid reservoir |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Driver Position | for right-hand drive vehicles |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.06
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
| Paired article numbers | 41078 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.05
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 632 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 75 mm. 64 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.99
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 126 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HP, D67HR |
| Replaces | 30302; 44952; 44970 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear/Sprocket, camshaft (25022)
- 1x Febi Timing Chain (17650)
- 1x Febi Sprocket, crankshaft (25033)
- 1x Febi Guide, timing chain (15493)
- 1x Febi Guide, timing chain (10407)
- 1x Febi Guide, timing chain (10408)
- 1x Febi Tensioner, timing chain (02481)
£147.85
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 70 mm. 51 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Placement on Vehicle | Front Axle |
| Piston conrod diameter | 18 mm |
| Function | Shock Absorber |
| Min. Length | 407 mm |
| Max. Length | 657 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.84
Important compatibility info
| Stabiliser Diameter | 22.9 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with coupling rod |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174338)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£147.50
Important compatibility info
| Operating Mode | Mechanical |
| Function | Pump, fuel pre-supply |
| Length | 129 mm |
| Internal Thread Size | M16 x 1,5 |
| Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.45
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 74 mm. 66 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
| Min. Length | 294 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 429 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.44
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 22.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171029)
- 2x Febi Link/Coupling Rod, stabiliser bar (36989)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
£147.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023