Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Width 2 | 17 mm |
| Outer diameter 2 | 45 mm |
| Width 1 | 20 mm |
| Outer diameter 1 | 68 mm |
| Inner diameter 2 | 22 mm |
| Inner diameter 1 | 40 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with screw, with shaft seal |
| Replaces | 38651 |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (05417)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Screw (08953)
- 1x Febi Shaft Seal, wheel hub (28257)
£19.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 76.7 mm |
| Outer diameter | 139 mm. 43 mm |
| Additional Information 2 | with wheel studs, without wheel bearing |
| Bolt Hole Circle Diameter | 114 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Voltage | 24 V |
| Frequency Range | 500 Hz |
| Signal | High Tone |
| Noise Level | 109 dB |
| Length | 97 mm |
| Height | 89 mm |
| Width | 107 mm |
| Type | Signal Horn |
| Function | Signal Horn |
| Operating Mode | Electric |
| Power Consumption | 100 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.6 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Additional Information 2 | with staples |
| Width | 48.6 mm. 50.7 mm |
| Placement on Vehicle | Rear Axle |
| Length | 118 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1720 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 169 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 17 |
| Paired article numbers | 195003 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Width | 20 mm |
| Number of Teeth | 169 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.57
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear |
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.57
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Eject Force | 320 N |
| Stroke | 205 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 269.5 mm |
| Housing Diameter | 18 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.57
Important compatibility info
| Inner diameter | 12.2 mm |
| Placement on Vehicle | Rear Axle Left, Upper, inner, Rear Axle Right |
| Thickness | 45 mm |
| Outer diameter | 34.1 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.57
Important compatibility info
| Length | 1990 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.56
Important compatibility info
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Width | 82 mm |
| Length | 157 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.56
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1530 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Placement on Vehicle | Lower, Centre |
| Length | 110 mm |
| Width | 93 mm |
| Thickness | 34 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 160 mm |
| Paired article numbers | 39676 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Spanner Size | 23 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 235 mm |
| Paired article numbers | 43618 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Length | 2020 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 335 mm |
| Outer diameter | 96 mm |
| Number of Coils | 9.3 |
| Function | Suspension Spring |
| Wire Diameter | 9.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Length | 87 mm |
| Height | 118 mm |
| Width | 87 mm |
| Outer diameter | 92 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 95.5 mm |
| Width | 43.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 126.7 mm |
| Width | 68.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 160 mm |
| Paired article numbers | 39675 |
| Function | Tie Rod End |
| Spanner Size | 23 |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.55
Important compatibility info
| Length | 1400 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Placement on Vehicle | Upper Left |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| for OE number | 204 501 05 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| for OE number | 13 62 7 806 782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Height | 28 mm |
| Placement on Vehicle | Front and Rear |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Outer diameter | 455 mm |
| Inner diameter | 304 mm |
| Paired article numbers | 196024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 16 mm |
| Outer diameter | 452 mm |
| Inner diameter | 284 mm |
| Paired article numbers | 195480 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Outer diameter | 65 mm |
| Material | Plastic |
| Width of castor bearing surface | 25 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 17 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 17 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.54
Important compatibility info
| Inner diameter | 14 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (28174)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£19.53
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Cone Size | 18.1 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Mounting points diameter | 13 mm. 12.5 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.53
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Outer diameter | 54 mm |
| Placement on Vehicle | Upper Right |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 651 200 07 70 |
| Width of castor bearing surface | 26 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.53
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| for OE number | 123 462 04 79 |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.52
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 8 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1908 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.52
Important compatibility info
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 200 mm |
| Material | Steel |
| Spanner Size | 19, 13, 12 |
| Additional Information 2 | with washers, with nut |
| External Thread Size | M12 x 1,25, M8 x 1,25 |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.52
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 339 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.5 mm |
| Width | 52.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
| Replaces | 16339 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | In-Line Filter |
| Additional Information 2 | with seal ring |
| Outer diameter | 92 mm |
| Height | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Length | 202 mm |
| Height | 65 mm |
| Width | 187 mm |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 110.6 mm |
| Width | 41.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 308 mm |
| Outer diameter | 140 mm |
| Paired article numbers | 174712 |
| Number of Coils | 4.8 |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.51
Important compatibility info
| Function | Urea Filter |
| Outer diameter | 53 mm |
| Outer diameter 1 | 45 mm |
| Height | 95.5 mm |
| Type | Urea Filter |
| Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Function | Sensor, coolant level |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Length | 121 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant level |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Length | 575 mm |
| Internal Thread Size | M10 x 1 |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Type | Switch, tailgate release |
| Function | Switch, tailgate release |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Colour | Black |
| Material | Plastic |
| Width | 58 mm |
| Length | 58 mm |
| Height | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.50
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 32628 |
| Function | Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (26045)
- 1x Febi Tie Rod End (26096)
£19.49
Important compatibility info
| Bearing/Mounting Type | Hard Version |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (03373)
- 1x Febi Rubber Buffer, suspension (26929)
£19.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023