Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with bolts/screws, with seal ring |
| Voltage | 12.5 V |
| Diameter 1 | 21 mm |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Water pump impeller material | Plastic |
| Total width | 68 mm |
| Signal type | PWM |
£211.74
Important compatibility info
| Net weight | 1.196 kg |
| Extra Description | Fuel Parts |
| Function | Fuel Feed Unit |
| Plug Type | Male |
| Housing Colour | Black |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
| Weight | 1.624 kg |
| Type | Fuel Feed Unit |
£211.72
Important compatibility info
| Net weight | 1.196 kg |
| Extra Description | Fuel Parts |
| Function | Fuel Feed Unit |
| Plug Type | Male |
| Housing Colour | Black |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
| Weight | 1.624 kg |
| Type | Fuel Feed Unit |
£211.72
Important compatibility info
| Type | Water Pump + V-Ribbed Belt Kit |
| Function | Water Pump + V-Ribbed Belt Kit |
| Extra Description | Micro-V® |
Additional Information
- 1x Gates V-Ribbed Belt (6PK2013)
- 1x Gates Belt Tensioner, v-ribbed belt (T39103)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T36418)
- 1x Gates Water Pump, engine cooling (WP0178)
£211.72
Important compatibility info
| Type | Water Pump + V-Ribbed Belt Kit |
| Function | Water Pump + V-Ribbed Belt Kit |
| Extra Description | Micro-V® |
Additional Information
- 1x Gates V-Ribbed Belt (6PK2013)
- 1x Gates Belt Tensioner, v-ribbed belt (T39103)
- 1x Gates Deflection/Guide Pulley, v-ribbed belt (T36418)
- 1x Gates Water Pump, engine cooling (WP0178)
£211.72
Important compatibility info
| Length | 1000 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Length 2 | 383 mm |
| Multi-piece | Two-piece |
£211.71
Important compatibility info
| Length | 1000 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Additional Information | with intermediate shaft gear |
| Additional Information 2 | with bearing |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Length 2 | 383 mm |
| Multi-piece | Two-piece |
£211.71
Important compatibility info
| Number of Poles | 5 -pin connector |
| Inlet Diameter | 57 mm |
| Type | Throttle body |
| Function | Throttle body |
| Additional Information | with gaskets/seals |
| Extra Description | Lucas Premium Blade |
| Weight | 0.763 kg |
| Housing Colour | Black |
| Connector Shape | D Shape |
| Mounting Type | Bolted |
| Net weight | 0.660 kg |
£211.70
Important compatibility info
| Number of Poles | 5 -pin connector |
| Inlet Diameter | 57 mm |
| Type | Throttle body |
| Function | Throttle body |
| Additional Information | with gaskets/seals |
| Extra Description | Lucas Premium Blade |
| Weight | 0.763 kg |
| Housing Colour | Black |
| Connector Shape | D Shape |
| Mounting Type | Bolted |
| Net weight | 0.660 kg |
£211.70
Important compatibility info
| Function | Oil Cooler, engine oil |
| for OE number | 51.05601.7176 SK |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£211.69
Important compatibility info
| Function | Oil Cooler, engine oil |
| for OE number | 51.05601.7176 SK |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£211.69
Important compatibility info
| Function | Water pump, traction battery |
| Operating Mode | Electric |
| Voltage | 12 V |
| Type | Water pump, traction battery |
| for OE number | 52139478 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£211.69
Important compatibility info
| Function | Water pump, traction battery |
| Operating Mode | Electric |
| Voltage | 12 V |
| Type | Water pump, traction battery |
| for OE number | 52139478 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£211.69
Important compatibility info
| Additional Information 2 | with seal ring |
| Operating Mode | Mechanical |
| Belt Pulley Diameter | 68 mm |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
£211.68
Important compatibility info
| Additional Information 2 | with seal ring |
| Operating Mode | Mechanical |
| Belt Pulley Diameter | 68 mm |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
£211.68
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36295)
- 1x Febi Tensioner, timing chain (36297)
- 1x Febi Guide, timing chain (40150)
- 1x Febi Guide, timing chain (36291)
- 1x Febi Guide, timing chain (102199)
- 2x Febi Gear/Sprocket, camshaft (102200)
- 1x Febi Guide, timing chain (102201)
£211.66
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36295)
- 1x Febi Tensioner, timing chain (36297)
- 1x Febi Guide, timing chain (40150)
- 1x Febi Guide, timing chain (36291)
- 1x Febi Guide, timing chain (102199)
- 2x Febi Gear/Sprocket, camshaft (102200)
- 1x Febi Guide, timing chain (102201)
£211.66
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510018010)
- 1x LuK Clutch Kit (624323319)
£211.66
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510018010)
- 1x LuK Clutch Kit (624323319)
£211.66
Important compatibility info
| Number of Connectors / Ports | 5 |
| Placement on Vehicle | Upper |
| Additional Information | with gasket/seal |
| for OE number | 14 71 071 72R S1 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£211.65
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023