Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Length | 76 mm |
| Width | 102 mm |
| Outer diameter | 52 mm |
| Thickness | 45 mm |
| Inner diameter | 18 mm |
| Paired article numbers | 22271 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left |
| Length | 98 mm |
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 83 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
£16.37
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17 mm |
| Mounting points diameter | 10.2 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information | with attachment/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (27103)
- 3x Febi Screw (24362)
- 3x Febi Nut (24361)
£16.37
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 70.5 mm |
| Thickness | 60 mm |
| Inner diameter | 14.3 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Paired article numbers | 174331 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
Important compatibility info
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
£16.36
Important compatibility info
| Material | Steel |
| Placement on Vehicle | Front Axle Right |
| Spanner Size | 10 |
| Paired article numbers | 34315 |
| Rod/Strut | Coupling Rod |
| Thread Length | 33 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M14 x 2 |
| Diameter | 1 mm |
| Length | 213 mm |
| Extra Description | ProKit |
| Replaces | 41033 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Placement on Vehicle | Left |
| Material | ACM (Polyacrylate) |
| Thickness | 8 mm |
| Inner diameter | 54 mm |
| Outer diameter | 68 mm |
| Function | Shaft Seal, transfer case |
| Type | Shaft Seal, transfer case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
| Length | 290 mm |
| Paired article numbers | 43560 |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Thread Length | 31 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 119 mm |
| Height | 67 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 57 mm |
| Thickness | 77 mm |
| Inner diameter | 16.6 mm |
| Inner diameter 1 | 17 mm |
| Inner diameter 2 | 24 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 213 mm |
| Spanner Size | 10 |
| Paired article numbers | 34316 |
| Rod/Strut | Coupling Rod |
| Thread Length | 33 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 1 mm |
| Extra Description | ProKit |
| External Thread Size | M14 x 2 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Replaces | 41034 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.36
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 19 mm. 10 mm |
| Thickness | 48 mm |
| Outer diameter | 65 mm |
| Material | Rubber/Metal |
| Width | 31 mm |
| Length | 157 mm |
| Placement on Vehicle | Front Axle, Rear |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.35
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 569 mm |
| Housing Diameter | 18 mm |
| Eject Force | 460 N |
| Stroke | 222 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 312.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.35
Important compatibility info
| Replaces | 16149 |
| Placement on Vehicle | Rear Axle |
| Length | 62.2 mm |
| Width | 78.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.35
Important compatibility info
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 7 |
| Length | 1687 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Additional Information | with lock nut |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (18740)
- 2x Febi Clamping Bolt, ball joint (29773)
£16.34
Important compatibility info
| Material | Metal |
| Outer diameter | 123 mm |
| Thickness | 21.5 mm |
| Inner diameter | 85 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 305 mm |
| Housing Diameter | 15 mm |
| Eject Force | 130 N |
| Stroke | 111 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 167 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 78 mm |
| Width | 72 mm |
| Material | Rubber/Metal |
| Outer diameter | 67 mm |
| Thickness | 78 mm |
| Inner diameter | 17 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Outer diameter | 46 mm |
| Opening Temperature | 91 °C |
| Function | Thermostat, coolant |
| Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 85 mm |
| Inner diameter | 70 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.34
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1015 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Length | 386 mm |
| Height | 57 mm |
| Width | 126 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | PA (polyamide), Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | both sides |
| Piston conrod diameter | 10 mm |
| Eject Force | 850 N |
| Stroke | 67 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 149 mm |
| Housing Diameter | 22 mm |
| Length | 234 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 924 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Width | 17 mm |
| Number of Teeth | 113 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without cover |
| for OE number | 1J0 121 403 B |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 116 mm |
| Paired article numbers | 104872 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 310 mm |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 120 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 172 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Length | 237 mm |
| Extra Description | ProKit |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
| Replaces | 178519 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Paired article numbers | 42762 |
| Spanner Size | 15 |
| Placement on Vehicle | Front Axle Left |
| Length | 197 mm |
| Thickness | 70 mm |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Spring Seat |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 63.7 mm |
| Width | 57.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.34
Important compatibility info
| Inner diameter | 25 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (10206)
£16.34
Important compatibility info
| Number of Teeth | 26 |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Material | Steel |
| Thickness | 80 mm |
| Inner diameter | 131 mm |
| Function | Mounting, leaf spring |
| Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 86 mm |
| Material | Rubber |
| Inner diameter 2 | 65 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100437)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£16.33
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 42080 |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Placement on Vehicle | Rear Axle Right |
| Length | 74 mm |
| External Thread Size | M10 x 1,25 |
| Spanner Size | 17 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 191 mm |
| Width | 38 mm |
| Thickness | 71 mm |
| Spanner Size | 19 |
| Paired article numbers | 43222 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 187.5 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Length | 191 mm |
| Width | 38 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Spanner Size | 19 |
| Paired article numbers | 43223 |
| Thickness | 78 mm |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
Technical Information
If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Width | 26.5 mm |
| Material | Plastic |
| Outer diameter | 69 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 6.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Additional Information 2 | with clamps |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 18 mm |
| Function | Oil Hose |
| Type | Oil Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Hose (103673)
- 2x Febi Hose Clamp (48345)
£16.33
Important compatibility info
| Width | 42 mm |
| Outer diameter | 74 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.33
Important compatibility info
| Length | 60 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with right-hand thread |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.32
Important compatibility info
| Height | 110 mm. 157 mm |
| Outer diameter | 80 mm |
| Number of Connectors / Ports | 2 |
| Function | Fuel filter |
| Filter type | In-Line Filter, with water separator |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.32
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023